Cord to Cordless Angle Grinder Restoration Conversion
HTML-код
- Опубликовано: 8 сен 2024
- I found this angle grind from a Japan recycle shop. It no longer works, I think it was abandoned in Japan. In this video, convert it from AC100v to DC 18V, the power is weaker than the original power, but it cuts well.
DC motor 895 price $6
- Original coil wire is 0.8 mm
- New coil wire is 1 mm
Bosch & Makita Battery Adapter $5 from China
I hope you find this video useful and enjoy it!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
** I still keep some parts, I want to help the world environment **
Thank you very much for your likes, comments, and subscription!
Have a nice day
Gear Show
I've only used this once to sharpen my mower blade ruclips.net/user/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 but so far very happy with it. I've never used one of these so took me a bit to figure out how to set it up but once I figured it out it did the job just fine. This is likely a single purpose tool for me to use on my mower blade and possibly the occasional axe sharpening so didn't see any need to spend a lot....this will do just fine!
Really appreciate good workmanship and knowledge. When he said "I will increase its power" It was really something
12@9 1500 группа для перфоратора на сайте знакомств
I love to see your patience re-doing the rotor However, it does NOT have only 40W power originally. That is the unloaded power. Next time put friction on the axle and record the peak current you get. Current will shot up as you try to stop it. That is the max power of the motor.
Okay, thank you so much for the tips.
@@gear_show Cheers man, keep on the excellent channel ! :) :)
Комментарий в поддержку канала и ролика, а также труда мастера отреставрировавшего болгарку.
Идея неплохая, но оборотов, заметно, маловато для "болгарки"
точнее она не выгребает по мощности)
Можно даже не смотреть, по звуку все понятно.. )
Но резать профиль жестяной - почему нет...
Для мелких работ пойдет, замки заклинившие резать и так далее...
Сэр, я Вам аплодирую! Я бы, конечно, смог бы разобрать эту штуковину, но вот вряд ли бы я собрал... Вы талантливый мастер! Вы реально талантливы! Привет из Сибири, Россия.
автор мастер по разводу лохов
This is my fifth video, but after watching you how you re-winded a brand new rotor to increase tool's performance, I find it hard to deny myself the pleasure to be updated from yours next projects.
Also, I'm not a native english speaker myself, but I find yours funny, like that one, with "cry baby". :)
That is okay, I'm not a native English speaker too. I'm glad you like my work. Thank you!
new video gear show
automatical like.
I like that
i think having a good memory is a must for this work..so many small stuff disambling is easy but putting it back together 😂
Nice my friends 👍
You are the only one doing it right thanks...
I just have a question
Why did you skip the last commutator segment and left the wire with insulation?
I'm a Huge fan of your work, I love the way you present your restoration and it means a lot to us when we are in need of such DIY restorations.
My only request is to see you restoring a Table Fan and making it run with 12v Bosch powertool Battery and an 895 DC motor, so that it could serve as an emergency fan in times of power outages who's is very important for fathers of small babies like me
i think you should get a voltage booster circut and use two batteries in series
You redid the windings on that rotor like it was nothing😎. Lovely work mate!
Back in the day, motors were made to be rewound!
I know, crazy right?
@@fredrickwelch5678 شش٠ضضش٠
ش١
Nice bro
Nice Build. You could have routed the adaptor wires internally and hidden. My OCD kicking in
Excelente conversión y restauración de esta amoladora angular de cable a bateria,💯👍🤜🔥🔥🙏🙏💯💯
Increíble trabajo, siempre veo tus videos, felicitaciones y saludos
Dang, that was impressive. Giving it more power by changing out the copper wiring was cool, and not to mention making a corded grinder a battery power grinder. Good stuff man.
د﷼
د
١١ذ٠١
*
1ضض
Very good
Fantástico trabajo , espectacular.
Muchas gracias por el vídeo.
De nada, me alegro que te guste.
Nice
Thanks
@@gear_show 😘
I'm addicted to your cordless conversation video
Thank you! I'm glad you like it.
The blued stators is a sign of overheating which my have caused the winding to be fused together.
Okay, I see, thank you for sharing!
This is smart
Legend bro
Love you fix it up my guy.
Thank you!
As usual, you did another excellent conversion work! Keep posting...
Thank you! I will do!
Excellent work👍👍👍. Thanks for sharing
Sempre vou deixa meu Lake pra fortalecer o canal 👍👍
Obrigado!
Мне одному кажется, что её можно было попробовать починить - или шнур питания или кнопку или щётки зависли. По состоянию статора и ротора и его ламелей визуально бывает более убитые работают...
Если обмотки статора целые, то можно просто заменить якорь целиком. Мне пришлось перематывать статор самому, а якорь купил новый, болгарка отработала почти 15 лет😂
Именно ламели убивают щетки, если коллектору хана
bonjour merci pour la video c'est tres gentil de votre part
Merci beaucoup!
so coollll
Thanks
Я тоже делал такую ушм.Только от акб авто с длинным проводом)) но всё равно купил ушм макита на акб и доволен)) каждому своё.
Я тоже так же сделал поставил мотор от шуруповерта и аккумулятор, один собран на 18650 или просто к авто аккумулятору подключаю проводом.
Макитовской пилил хорошо работает и хорошо в ней защита от перегрузки хорошая
まさかコイル巻き直しとは思ってませんでした。素晴らしい!
In this case instead of rewinding the rotor
Use 20v dc motor from an old cordless grinder such as Bosch or makita
And use less grease for the head gearbox
And use a larger battery
Okay, thank you so much for sharing!
Super profesionale!!
Love from 🇮🇳🇮🇳 india
Battery king!
Most brushed AC motors would give more power with DC as they are a compromise have boosted many a vacuum cleaner by inserting a bridge rectifier into the circuit.
Good idea👍
Thanks a lot
非常に感激
ありがとうございました!
Sometimes I wish equipment like this had some form of odometer or running time clock so you could know how much use it's gotten between servicing.
Great !
Great work bro👌👌👌👌👌👌👌
Parabéns, genial👏👏👏😍
Eres barbaro. No cabe duda del que es perico donde quiera es verde.Verdad de dios.
Thank you, Gear Show, for providing useful restoration videos as DIY anthusiast people.
Uber clever
Amazing.👍👍👍
Thank you 👍
👏👏👏👏top
makes a very good battery cutter.
Thank you!
You are a true master in power tools restorations .Greetings from Venezuela
Thanks and welcome
Ну теперь держитесь каталитические нейтрализаторы
@Umid лучше не буду)
@Umid при чём тут я
Речь об авторе видео
Great video 👍👍👍
So so skillful . . . very professional.
amazing
Gooooooood
Like 🇧🇷🙂
Super easy, ....
Dude you blast through them conversion like you know what your doing absolutely brilliant job :-)
Thank you so much!
how many loops and ropes did you wrap.?? that's amazing
The same loops, but different wire size, in the description.
it’s really cool! but would be cooler if a bldc motor was used
The motor on this one looked so small comparing to the ones in previous videos. Great work, also for the planet!
Yes, thanks
what? how is it "good" for the planet lmao???
@@zemudikat Would it be better on the waste dump?
@@kret63 ok you're right xD
I love your work
1. It is necessary to remove the impeller in the angle grinder motor, since it works in the opposite direction from the impeller on the outside of the motor. Two impellers will lead to unnecessary overheating.
2. Do not press or knock on the opposite race of the bearing. You can only press on the bearing race that is currently being pressed in. Otherwise, the bearing balls will push through the races and this will significantly reduce the life of the ball bearing.
3. Engine power is measured not at idle, but under load.
4. The cross section of the wires to the adapter must be larger. In them, the current strength can exceed 40 amperes.
5. The switch needs to be replaced, as it is not designed for a significantly increased current.
Thank you so much for sharing!
Hello my lord of "Battery"
Hello @Pangeran Tampan , thank you!
Awesome
God job 👍👍👍👍👍, can you change the electric mitter saw to a battery mitter saw? Thank's
Ces vraiment magnifique job
Very nice. Great job on this one.
Good vídeo bro
Good idea
Many many thanks
Interesting. Only noticed you showed the diameter and number of turns for of one of the magnet/motor wires. Why show one and not the other?
BRAVO!!!Good job man.You're the boss!!!
Adorei! Livre de fio. Ótimo manuseio. Gratidão Gear Show!
Muito obrigado!
после реставрации даже корпус как новенький, вылил новый прям
流石ですね👍😊
😊😊😊
So much cooling for Angel grinder
Thanks.but,I,ve question first time we saw .80mm copper wire and 16 turns.Then you said that motor power not enough.so you wanted that increase the motor power .I got that but when re-wending the motor you are not said how much turns you are use and what kind of copper wire you used.please,let me know.
thanks for this video , i wait it a long time . but i prefer to rewinding the original shaft like cordless jigsaw you made instead of adding dc motor like other channel do .
I hope to see another video of cordless angle grinder by add the magnet and rewinding the original shaft with thick coil . and its may more special and its efficient and less vibration. :)
Yes, you are right! I will make another modification like your suggestion. Thank you!
@@gear_show I will wait for it , thanks for your replay
@@gear_show tanks for making other modifications video 👍
Very good restoration very nice idea good maintenance steps thank you very much 👍👍👍👏
Great work! very entertaining
Glad you enjoyed it!
Nice vedio bro i watch every single of your vedio
máy mài china hân hạnh tài trợ kkk
역시 대단하십니다👍👍👍👍👍
감사합니다!
U r really genius. 👌👌👌🥰🥰
Thank you so much 😀
Greate!!!
Buddy you did excellent work, as always, I really like the result 👍
а сколько оборотов получилось на диске?
на видео видно что еле еле пытается распилить, сильно проседают обороты, он на ускоренном пилит дольше чем на обычной болгарке. жизнь плоха без лоха )
Can You convert a industrial sewing machine motor yo dc current....????
Servo motors are very expensive....in chile....
Thanks..!!!!
Muy interesante
Bravoooo! 👏👏👏👏
Провернет вал в соединении. Разобьёт подшипники, балансировки то нет теперь.
Что за мода переводить всё на аккумуляторы?
Только я знаю ответ после того, как он был использован несколько раз.
Brilliant
Thanks
❤️❤️❤️❤️❤️
Parabéns muito bom!
Excellent work! 🔨 👍
Gran trabajo, en la rebobinada cuantas vueltas y diámetro se uso?
I am first to my big friend
Yes you are, thank you!
Quantas voltas na bobina..?
Fio 0.08 mm..?