I know all about moving old stuff out of the way and then twenty minutes later, move it again. The joys of having stuff is that you get to continually fix it and move it!:)
If you have trouble walking grain out the back of the 4400, put some taller tires on the back. We used to do that in the rice when everyone was getting away from them. We liked them because they were light and perfect for the buckshot fields we had.
Excellent video :) my late Dad combine 1968 105C McCormick International had 1945 Farmall H basic gas motor 4 cylinder 202 Cubic Cm size also how go it start put in Commercial grade Desiel type from 1990's Dodge Cummings size Cold Cranking Amps , 210 Reserve Amps and no problem starting up after 4 turn over in trying out ! Plus pull choke all way out, 1/4 throttle one snort of Ether spray to , what do put 91 octane gas 3/4 full with 1 gallon Desiel fuel tank also bottle of fuel injection or carb cleaner in fuel ! She ran like top for Desiel motor have heard add 200 ml of GM Automatic Transmission fluid 2 or 3 type in fuel and smoke bit but cleaning out fast plus grey bottle of STP Total Treatment fuel injection and carb cleaner in fuel tank to !
I had a ih 5288 parked on a fencers for 5 years, decided to put it back in service running a relift pump on some rice. Pack rat big as a half grown possum took up residence under cab. Took half a can of ether and 7 smoke bombs to get that bastard out of there. 😂
Why don’t you just put it in neutral, and hook on to it with one of your Massey’s..... But ten again, you could probably use the exorcise, going up and down... Did you try stepping on the throttle?
We had a 7700 combine. The best part of it was the engine, once the dead batteries and sketchy wiring got it running. Ours had a 404 Non Turbo. Gear Shift and Manual Connect Auger with the slowest hydraulic assist known to man. Ah. The good old days. Our Gleaner M2 Hydro was a Cadillac in comparison. Thanks for the video. Looking forward to the next adventure.
Thats a hoot! Our 6600 (329 JD motor, just like yours) would never, ever, start without both batteries (fully charged) and a fresh can of ether installed on the electric dispenser. Was like that from new...
The only good thing about an old Deere? You can work on them without getting locked out! The Deere supplier around here still wants both arms, both legs, and my testicles for parts. I replaced a water pump on an Ingersoll Rand air compressor that's older than I am for my boss. It had a john Deere 4-cylinder diesel engine, the water pump was small enough I could probably have stuffed it in my mouth. The deere supplier took $500 for it and that was with a commercial discount!
One of these things is unlike the others…. ONE of these things just DOESN’T belong…. Need to get rid of the 6600 and get a MF 510 or other MF combine to have a complete matching set! Lol
I know all about moving old stuff out of the way and then twenty minutes later, move it again. The joys of having stuff is that you get to continually fix it and move it!:)
Truth! 😆
Thanks for posting JT
You bet
If you have trouble walking grain out the back of the 4400, put some taller tires on the back. We used to do that in the rice when everyone was getting away from them. We liked them because they were light and perfect for the buckshot fields we had.
Keep the great videos coming friend from Scotland 😊
Have thought about putting those panels on a 73 Ford so I will watch how you do that good video
My neighbors' main machine was a 6600 until last year. He picked himself up a 7720 titan. Told me he should of done that 10years ago. Lol
9600 are 10x the machine and can be had for $14,000... prepare for right ear damage on the 7720...
Great video You're very funny but also serious at the same time Keep the videos coming
Excellent video :) my late Dad combine 1968 105C McCormick International had 1945 Farmall H basic gas motor 4 cylinder 202 Cubic Cm size also how go it start put in Commercial grade Desiel type from 1990's Dodge Cummings size Cold Cranking Amps , 210 Reserve Amps and no problem starting up after 4 turn over in trying out ! Plus pull choke all way out, 1/4 throttle one snort of Ether spray to , what do put 91 octane gas 3/4 full with 1 gallon Desiel fuel tank also bottle of fuel injection or carb cleaner in fuel ! She ran like top for Desiel motor have heard add 200 ml of GM Automatic Transmission fluid 2 or 3 type in fuel and smoke bit but cleaning out fast plus grey bottle of STP Total Treatment fuel injection and carb cleaner in fuel tank to !
I had a ih 5288 parked on a fencers for 5 years, decided to put it back in service running a relift pump on some rice. Pack rat big as a half grown possum took up residence under cab. Took half a can of ether and 7 smoke bombs to get that bastard out of there. 😂
good idea on going with a replacement side panel ,as you know they rust on the wheel arch and under tail light .
Great video, glad you got a new bed side, the money does just keep going out 😂 think it’s the same on all farms
The farm can be a greedy b!tch 😆
Excellent!
Why don’t you just put it in neutral, and hook on to it with one of your Massey’s.....
But ten again, you could probably use the exorcise, going up and down...
Did you try stepping on the throttle?
What’s parts you going to use off a combine? Do you have a second 6600?
We had a 7700 combine. The best part of it was the engine, once the dead batteries and sketchy wiring got it running. Ours had a 404 Non Turbo. Gear Shift and Manual Connect Auger with the slowest hydraulic assist known to man. Ah. The good old days. Our Gleaner M2 Hydro was a Cadillac in comparison. Thanks for the video. Looking forward to the next adventure.
Sounds a lot like this machine lol.
My 4420 is a Cadillac compared to this…
But if I need it it’s always ready 😉
Lol, we have pack rats that like to nest in my combines in the off season instead of raccoons!!
Are you going to share the build of the lean-to? Please do. lol
I will now 😉
@@jtsbarnngrill6873 Thanks! Always looking for new ideas.
Thats a hoot! Our 6600 (329 JD motor, just like yours) would never, ever, start without both batteries (fully charged) and a fresh can of ether installed on the electric dispenser. Was like that from new...
They can be finaky 😆😆
I love seeing people make tpb references
Where abouts in Michigan are you from? I'm live north of GR but I've been all over the state!
Sounds like my 4010
This winter in Michigan has been all mixed up. Where are you.
Upper east coast
the clip from trailer park boy's was great
TPB is hilarious 😆
👌
great new video bud!
Thanks chlo!
How tall are those combines
My barn entrance is 14’ and she just fits
Paint 'err Massey Red JT!!!!!
Cheers.
The only good thing about an old Deere? You can work on them without getting locked out! The Deere supplier around here still wants both arms, both legs, and my testicles for parts. I replaced a water pump on an Ingersoll Rand air compressor that's older than I am for my boss. It had a john Deere 4-cylinder diesel engine, the water pump was small enough I could probably have stuffed it in my mouth. The deere supplier took $500 for it and that was with a commercial discount!
Huge benefit to this older stuff! It’s nice that a satellite doesn’t have to beam down repairs lol
I have seen the barn but where is the grill?😂
Maybe when the weather gets better….
I’ll show some mad grilling skills 😉😆
With my experience parts equipment don't stay parts for long thats what I sad with the last 3 tractors I bought
That happens to the best of us lol
I can hook you up with a good Massey 8450
How much would you sell the John Deere 6600 combine?
Can’t sell it just yet, still need it for parts until I get another back up machine
Do you ever regret son and your equipment? If so which one and why?
Kinda wish I’d have held on to my 7520 JD. I’ve got a video on that one with my 1805
Sounds like the muffler bearing needs adjustment😂😅
Definitely need some grease 😆
I wish my dad never sold the gleaner m at my grandpa's farm😢
Did i miss Fluffy ?
Edit: I was waiting for a racoon to come at you LOL
So was I 😆😆
Wouldn’t have been the first time lol.
You know fluffy wouldn’t come near mud 😆
One of these things is unlike the others…. ONE of these things just DOESN’T belong…. Need to get rid of the 6600 and get a MF 510 or other MF combine to have a complete matching set! Lol
I will have one at some point! Soon as I find the right deal and don’t need to pay more for trucking than the combine is worth 😉😆
@@jtsbarnngrill6873 Try a Gleaner like an M2 or L2.
So kinda funny you got all these massy tractors yet no massy combines just the ugly green ones
Right, they are harder to find around here than the tractors lol
That’s funny I just bought three of them as a package deal. Seems like they are hiding behind every tree out here the old 760 and 860s