Roll Tip INTERLUX boat paint Californian LRC BOAT RESTORATION and UPGRADES
HTML-код
- Опубликовано: 15 сен 2024
- In this episode we will walk through the roll and tip process of painting Interlux Marine Brightside paint on the helm station of our boat. After removing all of the hardware, filing, sanding, and priming the station it is time to get down to it. Of course, we will be sanding and applying more coats but once you have seen the process there is no need to repeat it all. If you missed the prep work be sure and go back to watch it in episode 1.
Here are the products we used:
Interlux Brightside www.amazon.com...
Interlux PreKote www.amazon.com...
Paint Roller Kit www.amazon.com...
Bosch Sander www.amazon.com...
Visit our affiliates:
www.dpbolvw.ne...
www.anrdoezrs....
www.kqzyfj.com...
www.dpbolvw.ne...
www.kqzyfj.com...
www.anrdoezrs....
www.kqzyfj.com...
www.anrdoezrs....
Support us by subscribing to our channel, hit the bell to get notifications on new episodes, and leave us a comment!
Music by JC azarelius.com
Huge Thank You,
Follow us on Instagram @mvbabayaga
Don't forget to like, subscribe, and leave us a comment, we always respond!
Love what you guys are doing! Will have to swing by your marina one of these days and talk shop (maybe pick up a t shirt :) too!)
That would be cool!
Lots of work but I am sure it will pay off in the long run.
We hope so! Carl & Yulia :)
Nice boat. I'm considering using this paint on my own boat. It says 130 square feet. Did it seem to actually cover this it says on the can for you?
The coverage was what was indicated if not a little more. Are you using on the exterior or interior?
@@MVBABAYAGA both. I'm planning to do a fiberglass deck and some cabinets on my back deck in it. Thinking of using in my head also. Looks like decent stuff to work with
How do you like working with Interlux? Any tips?
We like it, it's a good product. We will be doing an episode in the future to compare it against Totalboat Wet Edge, keep your eye open.
What grit of paper do you use from start to finish?
Hi there and thanks for watching our videos! We start with 80, then 120, then 320 or 400. We like this combo the best, unless the surface is pretty smooth to start with and I will jump to 100 grit right off the bat. On this project since I used a filler in certain areas I wanted the surface to match all over. I was using 80 on the filler spots so used it on the whole structure to make it all uniform. Its questionable to use 320 or 400 at end since I have found most marine paint will fill up 120 marks well, but still hit it at the end with 320 or 400. Hope this answered your question? If it didn't let me know and how to explain better. Thanks again for following and watching us. Carl & Yulia