Видео

When there are bubbles, Is that okay to not to sand it down? Would the air bubbles create a situation that make the surrounding areas creck up easily under the sun exposure?

13:05 Thank you

I came here for some honest advice about these 2 products but I feel like this is a total boat sponsored video so I am not getting legit info. I could be wrong and am sorry if I am but I will continue my search for a legit comparison and skip part 2.

Which lasts longer? Sapele gunnels on old Boston Whaler. Lots of sun exposure.

Good video. How is lust on vertical surfaces? Any run problems?

One needs to preheat Epifanes by leaving the quart (unopened) in the sun first

Incorrect,, epiphanestacks faster than you’re stating,.and also epiphanies rapid build does not need sanding between,..plus that brushing you show -just mopping back and forth is as about unprofessional technique as I’ve seen.

Never compromise: Epifanes every time! But nice commercial 😅

With all due respect. This is not an apples to apples comparison. 1.) Epihanes recommends thinning for this varnish. If you didn’t want to thin, than you should compare TB to Epiphanes Rapid Coat or RapidClear varnish. 2.) Thinning will affect flow, penetration/ bond and finish. 3.) Cost: Of course TB is cheaper, it already is prethined in the can. Thinner is far cheaper than pure varnish. 4.) Budget: Time is Money. Frequency of varnishing and performance should be a major consideration. Just saying…

Thanks for this video, great info. Just wondering how either of these would look like on outdoor pine wood? Restoring a 1928 cottage style 4 bedroom house in a rural development in Pennsylvania. Hope to hear what you think... Thanks

Total Boat Lust should be thinned with their specialized thinner for larger projects. Really it's better to thin 50% with xylene and spray it and then 25% for all the next coats. Why brush a whole cabin, that is just way too slow. Total Boat Lust can be recoated in an hour or 2 and there is no need to sand between coats, if you can spray even. I have used both products and TB Lust is not only more durable it can be layered faster. It is more of a pro product though and takes more skill to apply. For DIYers I recommend TB Gleam 2.0, it levels a little better and had longer work time.

It is pronounced "Epifawness" Your credibility is diminishes when you can't pronounce the name correctly. Lust absolutely will not go on smooth nor brus out. It also will not smooth out and too easily leaves holidays.

New subscriber here.... great video! Epifanes fan here on 90ft of mahogany toerail on my 1973 ChrisCraft Commander 41. Because that wood is nearly 50 seasons old I use Smiths penetrating epoxy on sanded surface, one coat of mahogany filler, sealed in with penetrating epoxy and then at least one coat of Epifanes clear varnish.

Awesome video- thanks! Quick question- for exterior teak, eg caprail, what is your opinion on TB Lust vs TB Gleam 2.0?

Nice boat. I'm considering using this paint on my own boat. It says 130 square feet. Did it seem to actually cover this it says on the can for you?

Killer video bro thank u

Thank you for making this video. By the way, have you tried Epifane two parts pu varnish?

I just subbed yesterday, your background music is very distracting, it’s annoying.

Good info, I have a GB’s 42 and its time to varnish. I subbed and liked.

Lance Armstrong!!!

"Epi FAN is"

Great video! But you know you're mispronouncing Epifanes right?

Hi I’m unsure if you got my last comment. We love your videos. Would you happen to know where we can get the headliner redone? We are in marina del Rey. 1976 pacemaker

Do you wear we can redo the headliner? We are in marina del Rey. 1976 pacemaker.

I have some red cedar live edge OUTDOOR bartops that I need to seal and protect. After researching and speaking to several people...it seems as if varnish is the way to go. I was thinking about Epifanes. Do you recommend Total Boat instead? It will have all weather exposure from the Kentucky weather. I'm also new to the process. Just built a pool bar and decided to do the live edge bartops. Any helpful information will be appreciated 🙂

It's that simple, just go to the Stodoys website and enter the world of woodworkers.

Woodglut has a very large project base.

You can use Stodoys and plans. The best plans and very detailed instructions. You can learn a lot from them and do it yourself.

Would total boat be best for outside swings. We are talking Texas weather

Thanks for making this. About to Lust on our boat rails. Now subbed.

OK, you got my subscription and like. I've watched other varnish comparison videos, which I liked too, but you brought new aspects for consideration. Appreciate the video, the efforts and that you are restoring an older boat. And I probably enjoyed the shaking of the cans too.

the JD tech team is really awesome. good video, thanks

thank you

Very good vid. I recently purchased a 1986 Sea Ray 300 Sundancer. A LOT of teak. I had at one point said i would not buy a boat with a lot of teak because of the work. Since the price was right and I knew how the boat was maintained I bit the bullet. The first thing I did was removed the swim platform inserts to refurbish during the winter. Well I have spent countless hours on youtube learning what to do. I got lots of procedure but the products used were many and confusing as to what to do and what to do it with and why. Asprin was my lunch and dinner.... until now. Thank you man for your simple to understand instructions, product advice and why.

Cool project. I like what you are doing. If I may suggest, don't add the techno music to the background when you are talking. It is distracting and makes it hard to listen to with headphones. I subscribed to your channel and look forward to watching in the future,

Thanks for the shoutout! So psyched for the future of boating in San Diego with you guys!

Great video guys keep them coming.

I think it would be so much more difficult owning these old machines if you didn't work on them yourself. Plus its actually enjoyable when things go well. I like the break down of costs. Subscribed

I have Perkins 6.354 in my boat and I run group 31 with 950cca batteries and its been fine for a year and a half

What grit of paper do you use from start to finish?

Thank you for watching, we really appreciate it! You can help us by watching through the end, subscribing, liking, and hitting the notification bell for future episodes. It actually helps us a bunch and doesn't cost you a thing. If you have any questions or comments, please don't hesitate to leave it below. We would love to hear from you! Carl & Yulia :)

Thank you for watching, we really appreciate it! You can help us by watching through the end, subscribing, liking, and hitting the notification bell for future episodes. It actually helps us a bunch and doesn't cost you a thing. If you have any questions or comments, please don't hesitate to leave it below. We would love to hear from you! Carl & Yulia :)

hey there !! My way on your channel !! ---> gave it a like and became a follower too ---> hunting for that AWESOME t-shirt ;-) . Good luck and cheerio !!!

Love what you guys are doing! Will have to swing by your marina one of these days and talk shop (maybe pick up a t shirt :) too!)

How do you like working with Interlux? Any tips?

Great review of both products! Can't wait to check out part 2!

Thank you for watching, we really appreciate it! You can help us by watching through the end, subscribing, liking, and hitting the notification bell for future episodes. It actually helps us a bunch and doesn't cost you a thing. Carl & Yulia :)

How long did it take to finish this project?

Lots of work but I am sure it will pay off in the long run.

Super cool!