Mk 2 Citroen C1 - Front brake discs and pads change

Поделиться
HTML-код
  • Опубликовано: 16 ноя 2024
  • In today’s video, I’m changing the brake discs and pads on a 2016 (Mk2) Citroen C1. It’s been three years since I last did this. It was in fact supposed to be the first ever video for this channel, but the videography was poor, so I didn’t end up making that video, but here we are! I’ve gotten myself a pair of brake discs and set of brake pads from Borg & Beck. I’ve used their products extensively in the past, I’ve been really impressed with them. I’ve had Borg & Beck clutches, brakes etc on various cars over the years and I’ve got no problems with the quality of them at all.
    In order to do this job, I needed a jack, axle stand, impact gun/breaker bar, 13mm socket, 17mm socket and a T30 Torx bit. Consumables wise, you’ll need some clean rag, brake cleaner, Mintex CeraTec paste (or equivalent) and some medium strength thread locker. It’s a case of removing the calliper and hanging it somewhere safe, so it won’t stretch the brake hose, remove the calliper carrier, remove the disc and clean everything up. Replace the brake pad hardware, lubricate the back of the pads and start to reassemble in the reverse order of removal.
    Please follow me on Instagram @dabdiy for sneak peeks of what I'm up to between videos and if you're feeling generous, you can buy me a coffee by clicking on the link below. Any coffees bought are greatly appreciated and you'll have your name in the credits of all future videos. www.buymeacoff.ee/dabdiy.
    Don’t forget to follow my sponsors:
    • TSA Performance on Instagram @tsaperformance for everything you’ll need to make your 1KR engine perform as it should.
    • Form 7 Performance for all your aftermarket parts needs for almost any vehicle, @form7performance on Instagram, using code ‘DABDIY’ at checkout.
    • X8R on Instagram @x8rlimited, using discount code ‘DABDIY20’ at checkout.
    • Mishimoto, @mishimoto on Instgram.
    • Blossom automotive for all your sticker pack needs. www.blossomautomotive.com/dabdiy and use ‘DABDIY10’ for a discount at checkout.

Комментарии • 7

  • @carloctober2202
    @carloctober2202 Месяц назад

    Thanks for the great video. What lubricant do you use on the caliper slider bolts? Lower damper rubber keeps swelling and seizing. This is on mk2 aygo. Ended up removing the rubber till i get replacement. Cheers from South Africa

    • @DABDIY
      @DABDIY  Месяц назад +1

      I used a silicone grease for the slide pins

  • @seawolf690
    @seawolf690 6 месяцев назад +1

    on peugeot 108 2018 year is the same brakes??

  • @seawolf690
    @seawolf690 6 месяцев назад +1

    hello!!! How many Nm should you tighten the brake bolts?tanks

    • @DABDIY
      @DABDIY  6 месяцев назад +1

      Caliper carrier bracket bolts to 89 Nm. Slide bolts to 30 Nm. Information taken from the C1 race series website.

  • @schmittalain
    @schmittalain 4 месяца назад

    Bonjour, les plaquettes ne sont pas tres usées? tu as combien de KM

    • @DABDIY
      @DABDIY  4 месяца назад

      About 60,000 miles