CNC Vendor Hacks And Hesperos System Build Progress..
HTML-код
- Опубликовано: 20 авг 2024
- This video covers CNC vendors that are building their controllers incorrectly including using incorrect components, missing proper grounding, using incorrect electronic enclosures, providing misinformation, or a combination of the above, and an update on the Hesperos system.
Please due your research before following any content creators video as the content they produce are for entertainment, and best practices are seldom followed, or understood.
If you have questions, or require quotes please message me direct at Storm2313@gmail.com or through my eBay store here. www.ebay.com/s...
Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.
These are my new complete DS Flexion double shielded ultra flex cable motor kits including tool less mounted ground bus bar.
All required connectors are included, and all you require is solder, and flux which I can include as well. Let me know.
3 axis - 30’ - www.ebay.com/i...
3 axis - 45’ - www.ebay.com/i...
3 axis - 60’ - www.ebay.com/i...
3 axis - 75’ - www.ebay.com/i...
3 axis - 90’ - www.ebay.com/i...
4 axis - 40’ - www.ebay.com/i...
4 axis - 60’ - www.ebay.com/i...
4 axis - 80’ - www.ebay.com/i...
4 axis - 100’ - www.ebay.com/i...
4 axis - 120’ - www.ebay.com/i...
Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H www.ebay.com/i...
CNC Ground Buss Bar System Complete With SC25-8 Terminals And 2Ft. Ground Strap www.ebay.com/i...
CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Here's a link to my Ethernet Smooth Stepper turnkey package www.ebay.com/i...
Here's a link to my UC-400 Ethernet Turnkey Controller package www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/i...
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/i...
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/i...
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/i...
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/i...
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/i...
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/i...
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/i...
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/i...
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/i...
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology
Thanks Mr Vince for CNC Lessons
Yes, sir thank you for your support! Vince
I think Vince meant to say , They never come back with problems !
Thank you sir for your support, and for correcting what I was trying to make clear...:) Vince
These breakdowns videos are so incredibly informative and invaluable!
Thank you for your support. I really appreciate it! Glad to help. Vince
Just to let you know that your volume is low and you get blasted out the room when the advertisements come on. Keep safe cheers Dave
Interesting as I boosted volume by 150%. Thank you for letting me know it will be corrected Thank you,
Vince
i think for $8500 i would look at a reputable machine dealer that is tested stable and has a reputation for stability.
Thank you for your support, and that goes for hopefully anyone interested in purchasing one! Vince
Sure the gas strut may be there because the spindle otherwise would fall because of the added weight. But it actually comes with quite a lot of benefits to the load put on the z motor 2d operations making it stay at the same hight. And making a new controller from the getgo would just bring the price up when it isn’t really needed and they also mention that it is a very easy install while changing out electronics isn’t really for the inexperienced. If you do your research you can also find many industrial like Cnc mills using gas struts maybe more common is using a counterweight but using a gas strut is definitely not wrong. I just want to say I very much respect you and your videos and I have learned alot from them but I just want to bring to attention the gas strut actually is a quite cleaver idea, haha
Thank you for your support.
I appreciate it.
Unfortunately, we have two different opinions on the correct solution. Using a motor with an integrated brake is by far the most professional, and simple way to keep the spindle from falling.
It also reduces parts count of the entire CNC system. The reason the vendor we're discussing didn't implement it is because as I said in the video its a quick fix to an already released version of their chassis.
Thank you,
Vince
thx vince
Thank you for your support! Vince
What would be an acceptable breakout board these days?
Thank you for your support.
The answer depends on the robots requirements you're working with..??
There simply to many variables without knowing the expectations of the end user, and the machine you're working with to answer. Thank you,
Vince
@@corvetteguy50 Thank you for the video. A DIY 3 Axis smallish CNC for wood and Aluminium. No need for a speed demon.
Here's my board to support the basics up to 6 axes. www.ebay.com/itm/142319224100
Thank you,
Vince
@@corvetteguy50 Thank you very much.
You bet...:)
Thank you,
Vince
In Romania You wont fiind double shielded cables.only 0.2 MM(wtf) can You run a 3amp motor running on that câble?
Thank you for your support. Unfortunately, you'll need 20awg as a minimum. I do ship my double shielded cables internationally Thank you,
Vince
@@corvetteguy50thank You Mr Vince . You teach us a lot!
I did go with single shielded.. hope i get some money to do IT correctly
Glad to help! Thank you for your support! Vince
Saving is always the best way to go. It takes longer, but in the end its always worth it. Thank you,
Vince