The 4 Axes Ethernet SMCU CNC Controller Servicing Graphics Process Is Completed..
HTML-код
- Опубликовано: 11 сен 2024
- This video covers the process of making the servicing graphics for the new integrated drive ethernet SMCU-4 CNC controller that will support anything from small robots all the way to full scale mills using Nema 42 motors.
Here's a link to Audioohms to review there CNC components. For best pricing please contact me. www.audiohms.co...
Please due your research before following any content creators video as the content they produce are for entertainment, and best practices are seldom followed, or understood.
If you have questions, or require quotes please message me direct at Storm2313@gmail.com or through my eBay store here. www.ebay.com/s...
Below is a link to my CNC components to build your system.
These are my new complete DS Flexion double shielded ultra flex cable motor kits including tool less mounted ground bus bar.
All required connectors are included, and all you require is solder, and flux which I can include as well. Let me know.
3 axis - 30’ - www.ebay.com/i...
3 axis - 45’ - www.ebay.com/i...
3 axis - 60’ - www.ebay.com/i...
3 axis - 75’ - www.ebay.com/i...
3 axis - 90’ - www.ebay.com/i...
4 axis - 40’ - www.ebay.com/i...
4 axis - 60’ - www.ebay.com/i...
4 axis - 80’ - www.ebay.com/i...
4 axis - 100’ - www.ebay.com/i...
4 axis - 120’ - www.ebay.com/i...
Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H www.ebay.com/i...
CNC Ground Buss Bar System Complete With SC25-8 Terminals And 2Ft. Ground Strap www.ebay.com/i...
CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Here's a link to my Ethernet Smooth Stepper turnkey package www.ebay.com/i...
Here's a link to my UC-400 Ethernet Turnkey Controller package www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/i...
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/i...
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/i...
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/i...
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/i...
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/i...
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/i...
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/i...
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/i...
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/i...
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology
This looks like an amazing build. Love the clear labeling through those vinyl labels. Well done!
Thank you sir, and it was a pleasure meeting you today! Thank you again for your support. Vince
40mn video, what a treat
Thank you for your support. I really appreciate it. :)
Vince
love this build
Thank you sir. I really appreciate it! Vince
Mr. Vince, thanks for the educational videos.
I want to know which is better for a CNC transmission system: SBR16UU or HGH20CA?
Second question:
which is better, having the transmission system on both sides or just in the middle of the chassis like the CNC 6040?
Please contact me through my contact information to setup a consultation as this would fall under engineering. Thank you,
Vince
@@corvetteguy50 I am just learning
A single axis is much easier to setup than a slave dual rail configuration. HiWin is excellent quality, and made in Taiwan if their genuine linear guides. Thank you,
Vince
@@corvetteguy50 Thanks
@@corvetteguy50 Mr Vince could you share with us a way to make a home soldering flux
it might help get a lot of content creators to think twice before they post anything... fingers crossed
We'll certainly hope so, especially with everyone watching. Thank you again for your support! Vince