Insane Compound turbo 6.0 is fast
HTML-код
- Опубликовано: 20 фев 2022
- Crazy 6.0 F250 with a compound 92 mm turbo set up does huge burnouts and crazy pulls and lays a ton of coal down sitting on 24x14 American Force morphed concave wheels for more check out my IG Pjtruckin
This dude definitely sold his Subaru WRX and bought a diesel…
Older M3 actually 😂
His dad will sue you
He upgraded
Evo 9 is way better then any Subaru. But power stroke is way cooler than Subaru Wrx
@@freedom8763 I don’t know about that, I guess coming from a Subaru he’ll be used to the engine blowing up though.
“Would you drive this”
“Not on these wheels”
A true truck guy
Real cow boy
@@pjtruckinI mean they kinda just look dumb
"did all this my self" - yes, I can see that.
Love the sound of the 6.0. And ford knocked it out if the park on the styling.
Catastrophic engine failure is cool too. Ford killed that part of 6.0 and 6.4z
@@davidhartnett3836 Catastrophic engine failure?? the 6.0 with studs is the most reliable diesel engine made
@@cs-gj3yfI have a studded and egr deleted 6.0 and it’s been pretty good but not as reliable as my 7.3 or my buddies 12v
Point is the guy is still learning. To make power numbers there will have to be a lot more in that build but what he has looks cool sounds mean and is fast. That’s good enough for me🤙
anyone else laughing at the fact that he had pink shorts on with steel-toe boots? LMAO
With proper fueling & tuning, this truck could definitely be a good street machine. All that smokes NEEDS to be cleaned up
The truck doesn;t seem to have enough fuel to spool that big charger.
@@stevetrojano1595 Definitely correct. He needs proper fueling obviously, maybe even a smaller atmospheric charger. Say 87, or 89 not that big 97 or 102 I think he said.
@@stevetrojano1595 he’s trying to spool a big ass turbo with a big turbo that don’t help much either😂
Definitely think he made a mistake when he said it was pretty much stock fuel set up…
Yeah there’s no fucking way that’s stock fuel
Definitely stock fuel. All you need is a hot ficm tune.
@@prestonsoccio3194 did you see how much that thing was smoking lmao even bouncing off the limiter it was still smoking
Because it’s not spooling the turbos properly. A big compound set up like that will just dump fuel with it not being enough to spoil it properly
This guy was asking for people to donate to his cash app to help finish the build on Instagram lmao
sauce him 20 with a job application
Nice truck and pretty wicked setup. I’d for sure get some fueling done, tidy up the welds and piping, powder coat some eye sores in the engine bay, and smaller wheel and tire setup. But overall, a great and unique build
Good thing garret owns it
@@Kv.2727 Who?
When he said get it while you can after finding a bunch of diesel oil in the back, hes right
Everytime one of you says "bro" an angel loses its wings
Follow your passion with this build is sick and I love it
Thanks man appreciate it
Wanna send a big thanks to Garret.. outstanding skils building his truck and i liked it so much. .... I bought it from him. Thanks man i hope to continue the transformation on this beautiful truck.. the video dont do it justice. .. this thing hauls ASS!!!
Please stop talking.
Post some vids
"needs more fuel" meanwhile it smokes like a chimney and goes nowhere. Buddy needs proper turbo sizing and tuning. All smoke and no poke
yea those turbos weren't ideal 😂
Nice truck, I got a Lml, head studded Fleece Heads, single RDS 68, 10m Pump, 40 overs. Mild built trans, lowered, and Cognito suspension control arms, Ppe Cast tierods hoping too get too those kinda power numbers one day. I might be pushing 7-750. Need too build the bottom end next and I’ll go Compound with a extra pump. She burns clean clean now tho, hardly any smoke. My tuner did a great job with the trans and fuel and air.
awsome truck might want to look for a long block to have on the shelf once you sand blast the cylinder walls in a year
Nice truck bro. I had some furys a while back and got rid of them because they were to loud lol.
Love to see young people doing stuff like this using there talent, he did the best he could with what he had maybe some one will help you tune it instead of putting you down great job
Dude with the dually definetly didn’t pay for that truck. 😂
How did he mount the 6.7 valance on that bumper? I tried to do it on my 06 and it's not lining up right.
That’s 6.0 is sick !!!! I want one
A running project is the best kind
“Country boys” lol 😂
Heck of a build.
Whoever things fury’s are loud have never heard what boggers sound like. Then they’ll know what loud is
Oh yeah boggers are by far the loudest. Furys aren't that loud
beautiful truck.
I follow this dude on tiktok and this truck is insane 💯
Trust me bro this is a piece of shit
cant beat that sound! think some of my neighbors hate me tho :/
best sound
There’s all the oil I been looking for lmao this truck is insane sweet build
I'd love to see the dyno test of this thing coming nowhere near "1400 hp" and/or watch it blow up
Charlie keeters 6.0 with triple setup only made 1397hp don't think hes even close to that not even remotely lol
Homie said he was on stock injectors, he put on a compound kit and thinks he’s hot shit
Lmfaoooo "Watch it blow up" 💀💀
Deff not even 1000 hp
@@theawb6986 not even in the 500 hp club haha
I seen this truck around where I live it’s a nice truck!!!!
Stock fuel and has a aftermarket oil filter cap 🤡
It's A Turbo Diesel Boys !
That king ranch is a good looking truck but wish they kept the original leather vs the leather they use now
i did not realize it was still stock fuel 💀
Definitely isn’t no dodge💀
no, it needs more air 😂
That was like 12 seconds just to get the turbos to spool
Wait a minute 7k for wheels and used tires?
the shit they do nowa days
When he said 1400hp reliably in a 6.0 ha got ‘em
Tips on the compound please.
Them welds on your piping though… Eek!!!
bros gonna scorch a piston
clean asf
We gonna ignore the trans going into limp mode on the third burnout 'attempt' or whatever that was?
your battery situation. can be solved easily. 1 simple Trick. any E series Van E250 E350. battery box is mounted to the frame rail. doesnt hang down very low at all....... bolt holes are already in the trucks frame....... just use some grade 8 12mm bolts... and nuts and install that and some battery cable and you have two batterys agian. doing this for 3 battery's on my truck.
Solid truck, you should try American Truck challenge or UCC
Whats the color code on that black?? It’s beautiful!!
“Clean build” but has the hood propped with a piece of wood.
My boy garret!
Where did you get those headlights
prioritizes wheels and tires over built motor...
very interesting choices
Hater
@@samjackson3359 ur soft if u think that's hate😂
Agreed, wide fuels with good tires until the motor got buttoned up would be better
Well the kid is wearing short pink shorts. Says alot
Definitely the best shirt I got one
hell ya !
buddys got some rich parents
That is sick
All the power needs to be top end. Unless you’re towing. And fix the fuel setup before it destroys the motor
why would a stock fuel setup destroy the motor?
@@stevetrojano1595 stress
@@M_A_R_I_N_E785 wouldn’t destroy the motor though. Truck needs more fuel. Won’t even spoil.
Un burnt fuel means hot egt hot egt is bad
Edit : The more complicated way to explain it is, the trucks air to fuel ratio is a catastrophe because he’s got 2 giant turbos and stock sticks, stock fuel pump and no lift pump. Cant burn the fuel off if you don’t have the air moving to clean it up can’t get the turbos spinning without enough fuel complicated but simple.
@@chrisanderson2208 he needs bigger pumps and sticks. There isn’t enough fuel to spool those chargers.
truck sound like it about to lift off
What headlights are these? Been looking for something like that for my 6.0
Same
I’d go with some black background with clear lenses. You can see a lot better at night and looks better in my opinion
there prob some clear ones tinted
Whats the piece under the front bumper called from the 6.7???
Front valence
Where can I get that lower front bumper
Is this for real? What a horrible turbo pairing for the power goals. Stock fuel and a stock motor? Should’ve bought SoCals turbo mount too instead of that home grown atrocity.
BuT iTs WeLdEd To ThE aLtErNaToR!
Waited 20 minutes for this truck to get "insane" Beginning to think he put the wrong thumbnail on this one. 6.0 does burnout as well as stock Ford Windstar.
Buddy's parents windstar we drove in high school would lay a pretty sick patch tho.
Has it gone boom boom yet?
That wheel and tire set up is sick. I mean literally🤮. I hate it.
That engine bay needs some help lol
Arp head studs. Upgraded heads, bulletproof kit with injectors and this would be a crazy build. Skipped the first step tho (bulletproofing)
ahh true that thanks for watching man
Trucks beat.
The fuel needed to properly charge that turbo setup is going to send some pistons to the moon, Assuming he’s stock bottom end
the 6.0 bottom end doesn't need help - however O-ringed heads are a must and after that there's zero issues. modded trucks almost never retain the EGR or DPF so it's a stock block with typically killdevil heads (stock refurished are fine but don't flow quite as well) and head studs. that plus 140% injectors and you're almost instantly good for 700whp when the 6.0 is joined with a large external oil cooler. when driven responsibly this setup will get 24mpg on low boost and last forever. no need to roll coal with a properly tuned powerstroke.
@@mesarosshawn2422 700+ with compounds needs rods 100% of the time...
with stock fuel he can't make enough power to break parts
But bro that's 1400 hp lmao
@@justinmiller9380 24,000 hp if only they sprayed it too -
I can't decide who's commentary on this video I'd rather enjoy; Clint Eastwood, Hank Hill, or Red Foreman.
If anyone knows who jack6nasty is, his truck would absolutely smoke this thing no problem. Jack6nasty’s old setup would put this thing to shame.
Dude said he has a 6766… LOL that’s a stock charger in factory location.
How much for the rims?
No air filter?
This is literally that poor kid asking his followers for money 😂
1400 hp? interesting...
Not a chance lol way too much air for what he’s got and no motor work. Ricer dudes taking over the diesel scene.
🔥🔥
Mount the battery under the bed or in the bed bro
this is what i imagine every kid that thinks his 6.0 has 1400 hp wears. pink shorts boots and i love hot moms tee
Take 7’500 for those wheels?
Nice F250
thanks for watching man appreciate it
09:09 awesome Truck....I am happy some "concerned citizen Karen" didn't call 911 to report a " car fire".....
How much these trucks go for
My American force 24x16s were-101 and my American force 24x14s are -76
Hey I’ll like to make a offer on the wheels will they fit a 1974 k5 blazer ?
hey man please message me on instagram : Pj truckin
Hey i know that guy. Who ever welded that truck probably eats raw eggs! 🐌🚜🛸
Ain’t no 1200hp but still clean
This kid deserves this 6.0 with the boys he’s wearing maybe he is trying to be like kayne
What is that grill call I need one
There’s just no fucking way your getting that pile of parts to handle 1400hp reliably. it’s not a 12v Cummins m8
Just need a TALLER stack
Would you happen to know if he put a t51r on either turbos? Lol
Definitely not 1400 guy…. try 850 there’s a big difference, not hating she’s clean but
Lmao 850 how about try mayyyybe 500
Dyno it before I believe any better than modded stock turbo setups.
This page should be called daddies money express 😂 cause I know these little boys aren’t dropping 20k+ into these trucks
On top of the truck bring 50k+ lmao
Got the blueberry hqd in hand lol
I’ve seen single turbo stock 6.0s do better burnouts
he has way to much fuel he messed when saying it was a stock fuel system
Not just that it’s compound turbos it has boost lag
@@zachmccormic6543 that and he has a 92mm turbo to make 600hp
7-10k on wheels? Good investment
Ong If that's miami ik where you go to savage meets?
not sure but send me the invite pjtruckin on ig
I like how y’all took a perfectly good 6.0 and made it slow as fuck. Y’all bring that shit to Oklahoma and let a built 7.3 show y’all what’s up.
I have a 600 hp 6.0 and I promise you no 7.3 making less than 1200 horse can keep up with me
Fuel forge is wider