Shoebox-sized Gaming PC - S300 Mini-ITX Build
HTML-код
- Опубликовано: 10 сен 2024
- All brought to you by a deal for the most inexpensive case with a pcie Gen3 riser cable in the USA. a.co/d/cO0xiqp. Gaming Temps: 72° gpu/39° cpu
Parts:
Case - KXRORS S300
Motherboard - Asrock Z490M itx/ac
CPU - i7 10700 (not a 1700)
Memory - 64 gb Corsair LPX 3600/cas18
Storage - 1 tb SN750, 1 tb 980
GPU - RTX 2060 KO Ultra
Might do another video of the impact a single intake fan at the bottom makes for CPU/GPU temps. So far, it's the Seasonic AirSlimmer and Kaze Flex Slim beating the Noctua NF-A12x15 by 4 degrees on the CPU. GPU temps very similar.
OUTRO- Swimming Lessons by Bail Bonds from RUclips Audio Library · bit.ly/3RTvZ3D
---
Download free and safe music for content creators (Free Music, No Copyright Music, Royalty-free Music, and Creative Commons) · bit.ly/3RTvZ3D
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
I watched the video upside down because it made more sense for me to watch it from your pov
Yeah, 100% makes more sense, he needs to flip it for future videos
For anyone having potential issues with the GPU installation:
If you're having trouble getting the GPU covers off, unscrew the metal bit above the 2 covers, take it off, then unscrew the cover that you want to take off
If you're having issues connecting the GPU to the cable, slip the tail piece of the GPU under the plastic on the right of the connector then push the GPU into the slot with a bit of force
In terms of installing any kind of fan cables: I strongly suggest installing splitter cables and extension cords to all the fan connectors before-hand. It will help you save your fingers and avoid a lot of pain :)
I've built in the S400, the bigger brother of this case, and because I've been doing LP cooler tests, I had the chance to multiple times remove the mainboard; after the first test I immediately added said splitter cables to the regular case fan and an extension cord to the CPU fan connector.
cu, w0lf.
I think you want the bottom fan to blow out not in because it will assist the CPU and GPU blow outside air directly on their components
I have the black version of the S300. I managed to pack in a 5800x3d and a MSI 3070 ti inside.
what cooler are you using for the 5800x3d, and how is that cpu performing in this case?
*Anyone use Corsair Vengeance LPX DDR4 RAM with the ID-COOLING IS-55 cooler? Wondering if the RAM can just fit or not. Cheers!*
This will be your friend: m.media-amazon.com/images/I/61eV9WgI6EL.jpg . It was too tight for my comfort (your results may vary as it's 1mm to tall). I removed the VRM heatsink so I could rotate the cooler the other way.
My case came with a 1-piece front panel header cable and it doesn't match my motherboard pinout. Any tips? Mobo breakout cables also don't match
They combined them into one easy connector. You'll have to find this on your motherboard and make sure it matches the pins on the 1-piece cable. encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSxGIgfNwXlJL0pVDiHRlsNHjgIHGy_JTtbmQ&usqp=CAU
How long is the riser cable needed for the case? Does 185cm enough?
It comes with a 20cm, Gen3 riser cable which should work for anything that isn't the top tier GPU for $1,000. If you buy a Gen4, make sure it's at least 20cm since it fits perfectly.
@@tapts503 alright, if the order comes together means I don't have to worry the length
If it comes with 200mm/20cm riser cable, that’s the recommendation and try not to go lower that than.
I have a 7.5L, different pc case, smaller than this. The recommended length is 18.5cm/185mm. It was perfect size and snug. If I bought 20cm/200mm length, the cable would have push forward my gpu and it will not get installed.
How thin is the margin between the motherboard and the GPU? I'm thinking of getting this, but I use a rear M.2 drive with a heatsink and I'm concerned that it's too thick.
There is no room for a M.2 drive heatsink on the rear.
How long is the pcie riser cable?
How loud is the CPU cooler and are you registering any turbulence specific noise?
I can't hear the whistling noise with it two feet from me on the IS-55. The Fractal Terra has a slight whistling (aka turbulence) noise with the IS-55
thank u i wanted to see it compared to meshilcoius
What is the size of the pcie extender?
300 mm
can i know what cpu cooler are you using there
a.co/d/anZt5eA
nice drivers!
I wonder how you got everything for 300$. The cpu alone is 200$ 😅
the name of the case is S300
@@herculesperseus6326 its 300 dollars for just the name!?
these dyslexic cnts can't differentiate a S and a dollar sign
Cut the uhhhs.
Wanted to comment that myself. Felt like if I ran a word counter, "uh" would be at the top.
Yeah, and he keeps mumbling for the importance bits like fitting the components. Its hard to talk improv, so I wish he would do add in a voice over for clearer explanatios.
Looks like a noob guy doing this…