How to Replace Parking Brake Shoes 05-16 Toyota RAV4
HTML-код
- Опубликовано: 30 июл 2024
- Buy Now!
New Parking Brake Shoe Hardware Kit from 1AAuto.com 1aau.to/ib/1ABRX00066
In the video, 1A Auto shows how to remove and replace worn, squealing, groaning, seized, or damaged rear parking brake shoes. The video is applicable to the 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, Toyota Rav4.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oJP/1AXAA00013
• 14mm Wrench 1aau.to/oha/1AXAA00010
• 14mm Socket 1aau.to/oDe/1AXAA00015
• 17mm Socket 1aau.to/oDe/1AXAA00015
• 21mm Socket 1aau.to/oiJ/1AXAA00043
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oe/1AXAA00278
• Brake Caliper Hanger 1aau.to/ou/1AXAA00084
• Hose Pliers
• Locking Pliers 1aau.to/oai/1AXAA00139
• Needle nose pliers 1aau.to/ofe/1AXAA00051
• Needle nose pliers 1aau.to/ofe/1AXAA00052
• 1/2 Inch Breaker Bar 1aau.to/off/1AXAA00078
• Ratchet 1aau.to/oKz/1AXAA00016
• Socket Extensions 1aau.to/oDe/1AXAA00015
• Torque Wrench 1aau.to/okV/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/odG/1AXSS00035
• Hammer 1aau.to/ofz/1AXAA00091
• Pick 1aau.to/odQ/1AXAA00037
• Wire Brush 1aau.to/ob2/1AXAA00079
For More Info visit us at 1aau.to/h/bSc/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Авто/Мото
Great videos just one question which Calipar pin goes where'' one with rubber sleeves and other one with out sleeves. Thanks
These videos are great, thanks 1A.
+Kyle Sullivan Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Randomly remembered i saw tht the the vehicle possibly use brake shoes (i didnt know until i took off the wheels to chamge the shocks) came here to confirm tht it does and once again, superb vid.
I know they turn the camera off while you swear!!!
You’re a great mechanic, great work
I need hose pliers in my life lol
Im used to the sring and retainer clip style for keeping the shoes on drum brakes.
Those bent flat springs sith the nail pins were an absolute PITA to install whst a terrible design.
Great video.
great video! but why you sould have a resistance on the brake? isn't that bad?
Good video. I’d point out the manufacturer requires the pads to be assembled dry - no grease on the slide hardware / pad ears interface.
Did you miss a step of adjusting the pads to the rotors/drums?? Giving the wheel a hand spin to check for tightness of pads to the rotors/drum? Or do brakes self adjust??
Thanks for vid ❤😂🎉
Great video, thank you. But since you had removed the hub/bearing assembly, why not replace the shoes then. It would have been much easier. Cheers
Good job..5 star
+Mohamed Unoos Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Thank you so much , I learn in your video
Can you please show us how to replace the Cable of the brake parking , please
For the Same Car Toyota Rav4
+Djeff ETIENNE We'll keep this request in mind for a future video! 1AAuto.com
Wait, no lubricant for the pads rails....
Can i change mine over there & how much will the service cost me ?
My handbrake comes on but does not release the shoes when taken off. Is it a bad spring?
Thanks
Hi I need to replace the parking brakes on the drivers side. it all exploded inside the rotor. Do the spring s and parts go the same way on drivers side or opposite of the passangers side???????
+justaguy34y It would be opposite.
Thank you
Nice
How do you know when you need to replace them?
When you can make your own drive-thru window whenever you want.
Lol I put the adjuster all the way on the bottom on the edges of the shoes…. Not where it’s supposed to be even I thought it was weird because nothing secured it in place 😅. The brakes are so small the hub covers it all so I couldn’t really see where it was supposed to go
I could not push the springs to lock the pins. It is very tight. 2006 LEXUS lX470. IT IS NOT EASY AT ALL.
Is this procedure still the same if you have a 4WD RAV4?
+ukewarrior We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
What year exactly this rav4 you working on?
+MarsInBako Thanks for watching! The Rav4 in this video was a 2010 model.
Good job but I would of put the on the parking brake shoe and parts before putting back on the new hubs and lubricated the points. Thanks for sharing anyway.
+MAD PEOPLE THINGz Thanks for checking us out! 1AAuto.com
Bonjour
👍
FYI don't expect it to go this easy in real life on yours knees in your garage.
He says going to put the hub back on, then puts on a brand new hub
its an 8mm bolt to take rotor
But what pitch???
i would take off the hub,,it would be a lot more easy and you would see what you are doing!!!
The best way remove hub before replacement hand brake shoes ,,,
Tomorrow I will do it 😢
You could have cleaned the dirty parts
+Rod Parker Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
This is incorrect! This is not the set up for a 2005 RAV4.
I thought he said this is a 2010 RAV4. The video description needs to be corrected. At some year they went from rear drums to discs.
Unless you prefer cursing, remove the hub first.