How To Make ANY LEDGE Skateable!
HTML-код
- Опубликовано: 13 янв 2023
- In this video I'm going to teach you How To Make ANY LEDGE Skateable with only 2 main tools,
And it's going to be the easiest way possible!
All you need is a Rub Brick and some Clear coat enamel or concrete paving sealer 👷🏽♂️
Rub Brick:
www.bunnings.com.au/trojan-co...
Clear Coat Enamel Can:
www.bunnings.com.au/rust-oleu...
Concrete Paving Sealer:
www.bunnings.com.au/crommelin...
Polly Ledge Repair:
fasttimes.com.au/polly-ledge-...
JB Weld Steel Stick:
www.jbweld.com/product/steels...
CHECK OUT MY PREVIOUS VIDEO:
• What Size Skateboard S...
FOLLOW ME ON INSTAGRAM:
/ leon_paxton
lovely interaction with the supervisor lady. Jedi mind trick ✨️
Haha yeah, sometimes you just have to sweet talk them 😂
I’m obsessed with doing this. I skate at this church across from my house on most nights and I’ve absolutely converted all of the good curbs and ledges there. And I take numerous rails and whatnot up there it’s like my private skatepark and I love it so much.
I waxed the ledge on our church building, and a week later, they put a rail out for me, and they love being me skate every wendsday, and Sunday after and before church
Mission complete. I’m impressed by your calm when confronted by a nosy lady.
Haha yeah man, after 18 years of skating you get used to dealing with security, police, managers and angry pedestrians lol
Great video!
Thank you! 🙏🏼
Congrats on 3k leoski
Thanks so much my bro! 🥳🙏🏼
Awesome video
Thanks heaps dude!
Nice one iv just ordered a rub brick and laquar thanks for the advice
Sick man, get out there and make some new spots skateable 🙌🏼
Good video👍
Thanks for watching dude!
Nice
i didn't have a rub brick so i used a small paver from the garden, seemed to work ok, it was newer curb i was just basically trying to get rid of the brushed texture they finished it with. still gotta go back and clear coat and wax. let you know how it goes
Yeah dude, that will definitely work too!
Hell yeah, can't wait to see it 🙌🏼
Sweet talker 😂
It's all part of the process 😂
Nice vid! I love how your warm up was a manual 5 times longer than the best one I’ve done 😂
Haha thanks dude! I've just had a lot of practice lol
Yoo what Ryobi blower is that? I have been bringing my whole leaf blower to ledges when I rub them. And it’s so bulky. That one is perfect
I'mnot actually sure dude, I just went to Bunnings and got the smallest and cheapest one I could find 😂
whats up leon!
Yoooooo🤘🏽
What year did people start doing this approximately? Back in my day, You had to use curb wax.
I’m not too sure actually but this helps break the ledge in before waxing it 👌🏽
Make any ledge stateable but you set up a pristine ledge - skate stoppers.
Same process works for any ledge 👌🏼
@@LeonPaxton I want to see some gnarly east coast gravel mix ledges like we have around here! ;)
I'll try and find some crusty ledges over here then lol
I've used this technique on curbs up here in Maine, and that's about as crusty as it gets with all the salt and snow and ice and such. For extra crust, a cordless angle grinder with a masonry wheel is key. And wet the concrete with water to keep the dust down.
I wonder if wetting the ledge for rub bricking would make it harder or help the same way?
Can I put the clear coat on top of a curb that is already waxed?
Nah dude, that would just be a waste!
You could do that but the clear coat will be on top of the wax, not the cement so it would come off super easy.
It's better to clear coat raw cement so it sets in better and creates a slippery surface on top of the cement and then you can put wax on top of that 👌🏼
@LeonPaxton so how could you remove wax from a ledge thats waxed up but dosint grind at all.
Would a 60 grit be better for this? I know skateshops sell 25 grit but I grabbed a 60 grit
I actually don't know the grade of the rub brick I bought 🤔
I guess if it's a lower grade than you will just have to rub harder and longer lol
@@LeonPaxton Ok that's basically what I was asking. I was confused bc 60 grit was less expensive than 25 grit for some reason. Appreciate it homie!
Sup guys just wanted to add in case you guys didn’t know but the grits density is measured by the lower the number so in this case the 25 is more expensive because it’s harder and will last longer than a 60 because that’s a big space between the two hope this helps good luck !
@@chambersoveternalsuffering8065I appreciate the comment. I halfway figured but never knew for sure.
Lower the grit more aggressive it is
😂
"You're very good"
Little did she know 😂
Good informative video Leon 👍 I thought you were going to get Karened for a moment there
👁️ 👁️
👄
Thanks dude! 🙏🏼
I thought so too but she ended up being chill about it lol
is this legal?
Lol she had no idea what u were up to 😂
No idea at all, she was super cool though lol
Trucks metal under spray/laquer/paint makes that grind better. Better and cheaper use a big@ss lead sinker it also locks out the dust from where you spray, fills the tiny holes in the cement, hardens the surface while making it pure butter (Lead >wax).
Full process is rub brick, rub your trucks / or lead sinker to curb then automotive clear coat (lasts best) or any cheap laquer at least 2 times, then wax.
If filling in holes spend the extra time and effort to do them fully not just from a skater perspective. As done here water / grit / organic material / smell collects and it won't seem welcoming to sit on for anyone. If once you finish a place IF it is better for majority users (lunch time crowds) and looks primo THEN building managers, residents, local workers etc will recognise and let you do your good works in peace sometimes even bring you water on a hot day.
Like the camera guys fixing / making spots is the work of gods and some yet to be spotted goddesses!
Oh sick! Can you get the lead spray cans at all?
I'll have to try it 🤔
😂 the lady
Lucky I got away with it 😂
So good ha ha 😂
Don’t forget your orange vest
I actually got one after filming this video so I don't get hassled again lol
Hi-viz vest, reflective Oakley's, plastic "constuction" sign, no one bats an eyelid
I've got the vest, I just need the sunnies and a sign now lol
Hide in plain site 😎
So what if you come across a ledge that is all waxed up already and you want to take it off?
Yeah that’s a tricky one man! If you try and run brick a ledge that is already waved then it won’t work, the rub brick will just be sliding along the wax. You’ll have to use some sort of paint scraper to get the wax off and then rub brick it down once it’s raw concrete again 👌🏽
@@LeonPaxton yeah i think ima bring a scraper, some prypo alchohol, and then a blow torch to evaporate it. Then rub brick it. Then clear coat the wax. This ledge is worth it. Just wish that skaters that waxed it saw your video first
Haha true, some people think that all you need to do is wax but rub brick and lacquer is always the first step! It makes the ledge grind and slide way more consistently too 🙌🏼
#karenslayer 🤙
😂
If you brick rub it and lacquer it enough you don’t even hardly need wax, I’ve found.
Yeah dude, I've actually done this whole process on a few different spots and made them too slippery adding wax at the end lol
Use clear Lacquer not enamel. Even better use a clear concrete sealer that you have to roll in with a paint roller
Concrete sealer with a paint roller has been the best for longer or chunkier ledges 👌🏼
Me realizing this would be illegal asf if I tried this in Manhattan 💀
Haha yeah you need to pick your locations carefully for sure!
Bro just made a video of completely vandalizing privet property lol
You mean 'Repairing' private property 😉
That girl pretend to be nice she will call the police make report because she is karen
I'm lucky she didn't 😂
@@LeonPaxton disgusting they are