Just picked one up at Walmart. Something must’ve been messed up in their system because it rang up for only 99$…. Great video helped a lot on the setup !
I bought mine for $298 during Black Friday. I'm waiting until Spring to start using it. I need to watch more of your videos. Do you use any insulation boards on the bottom or interlocking foam mats to add more cushion and insulation to the bottom?
Had mine setup for about 3 weeks. So far it's great. Only dislike is the cover tube is already leaking. Apparently it's super common on all cheaper inflatable spas. However, I plan to diy something better anyway. Good luck with your spa you'll enjoy it.
Hey Tim, thanks for these videos. I ended up going with the Hollywood based off your videos. I set it up today and I’m not sure I filled it with enough air. Do you find your losing a good amount of air when the temperature drops. Mine seemed to lose a good amount from like a 15 degree drop in air temperature. I’m hoping I don’t have a pinhole.
Hi there, We just bought ours and plugged it in and connected all the hoses except the big gray one bc we have the black tube connected to it to air it up. When we plug it in the keypad lights up but when we try to push the buttons nothing happens? Are we missing something to get the keypad to first work
I found it for $50 at Walmart. There was only 2. I originally bought as a pool for my kids. Had no idea how much the original price was. Wish I would of gone back for the second one. This is is very very very durable
Thanks Tim. We have watched your videos thanks. Do you have one that shows draining and deflating. we are missionaries and we are going to try and pack in suitcases bro take to Ecuador.
I see that when you are filling the tub with air, you mentioned that it is blowing "warm" air. Our tub is already set up and it will reach max temp. UNTIL we turn on the bubbles. The air that blows the bubbles is COLD. I put my hands down by the air blowing out inside of the tub and it is cold! Within a couple of minutes, the tub id dropping in temp FAST! Do you have this problem? Should my air be blowing warm???
The air is warm but not as hot as the water. Your temperature outside is going to play a role in this as well. YES, it is normal. If we run the bubbles we drop about 2 degrees or so in the 1st 15 minutes of use and another 2 degrees in 20 to 30 minutes.
Question - I got the hose hooked up and I have lights but nothing happens when I push the buttons?? The buttons don’t seem to depress at all, do yours? Thank you!!
Thank you for the helpful videos. We just got ours last Tuesday. It’s running and nice and hot!! Do you know what the extra part is above the filter and chemical containers? I’ve been searching and I don’t see a reference to it. Thank you in advance ~The-Jeff
I have mine outside end it is cold out but I can I get a pass 95° it’s been almost 2 days of heating to get it where it’s at now I have an override it to 104 but staying right at 95
@@eliasgonzalez3780 It highly depends what temp your water started at.. took me 24 hours starting at 65F, mind you I also highly insulated my tub. I put it on insulation foam boards, wrapped the pipes with pipe foam, wrapped the tub in reflective insulation and also put the heating pump in a box with insulation. There's a reason it takes so long.. it doesn't draw much power, that's why you are able to put it on a normal outlet and not blow your circuit. It's normal for it to take so long if you have no extra insulation in the middle of winter.
Hey can anyone explain what the thing is above the tablet dispenser? You have the filter at the bottom, then the tablet dispenser then the thing closes to the top... what is thatm
It does have heated bubbles. The heater does stay on when the bubbles are running but it still does lower the temperature. I can get 30 to 45 minutes of above 100 degrees out of it even in sub 40 degree temperatures.
Is anyone having an issue with getting it to heat past 99 degrees? Brand new and cant get it to 104 degrees? I tried unplug, wait til it drops 91, then plug back in, but still holding at 99
Thanks so much for the video my husband I were having trouble figuring things out n you helped A LOT! So thank you!
Really helpful. Mine arrived today and this will help me a lot tomorrow.
Thanks for the comment. I have done several other videos. Feel free to check them out as well.
Just picked one up at Walmart. Something must’ve been messed up in their system because it rang up for only 99$…. Great video helped a lot on the setup !
Wow that is a steal 😳
I bought mine for $298 during Black Friday. I'm waiting until Spring to start using it. I need to watch more of your videos. Do you use any insulation boards on the bottom or interlocking foam mats to add more cushion and insulation to the bottom?
Hey Tim - did you have any issues with the LED strip and remote syncing and actually respond to the remote?
Had mine setup for about 3 weeks. So far it's great. Only dislike is the cover tube is already leaking. Apparently it's super common on all cheaper inflatable spas. However, I plan to diy something better anyway. Good luck with your spa you'll enjoy it.
I have not had an issue with that yet. I hope I don't have an issue like that.
@@bigtim208 it will regardless. It'll leak right at the seams of the line on that piece.
Family bought 2 of em at same time. Both have developed that leak
Cover tube?
@@DyLemmaOG sorry, the inflatable part of the lid
Amazing!!
Hey Tim, thanks for these videos. I ended up going with the Hollywood based off your videos. I set it up today and I’m not sure I filled it with enough air. Do you find your losing a good amount of air when the temperature drops. Mine seemed to lose a good amount from like a 15 degree drop in air temperature. I’m hoping I don’t have a pinhole.
Mine never got very hard to begin with. It has lost some air and I did add air to it. I have only had to add air once over a 1 month period.
Hi there, We just bought ours and plugged it in and connected all the hoses except the big gray one bc we have the black tube connected to it to air it up. When we plug it in the keypad lights up but when we try to push the buttons nothing happens? Are we missing something to get the keypad to first work
Hey Tim, Do the LED lights plug in separately or do they use power from the motor? Thanks for the viedo.
They are separate.
I found it for $50 at Walmart. There was only 2. I originally bought as a pool for my kids. Had no idea how much the original price was. Wish I would of gone back for the second one. This is is very very very durable
Wow
I just found one for 52 dollars I’m hype
Very nice. Seems to be sold out everywhere now.
$298 black friday deal. Also went next state over and its tax free.
Got mine for 298 she’s warming up rn
Lmao same got mine in Wisconsin
Same NY💪🏻
I just bought mine on black Friday. got it blowed up. just got to get water in it.
I paid $399 and have no complaints. Still it would have been nice to get it for $298. Lol
Did u just sit the filter in or did u have more pieces I just bought one please lmk
The filter housing is under the motor when you open the packaging.
Thanks Tim. We have watched your videos thanks. Do you have one that shows draining and deflating. we are missionaries and we are going to try and pack in suitcases bro take to Ecuador.
Hi. I need the inner inflatable lid cover. Can’t find it. do you know where I can get a replacement . Thank you
Do you leave your heat button on at all times, every day? Along with the filtered water button ?
Yes
How did you get your filter on?? Mines not working.
Curious to know what the height is to the min and max level markers please?
I see that when you are filling the tub with air, you mentioned that it is blowing "warm" air. Our tub is already set up and it will reach max temp. UNTIL we turn on the bubbles. The air that blows the bubbles is COLD. I put my hands down by the air blowing out inside of the tub and it is cold! Within a couple of minutes, the tub id dropping in temp FAST! Do you have this problem? Should my air be blowing warm???
The air is warm but not as hot as the water. Your temperature outside is going to play a role in this as well. YES, it is normal. If we run the bubbles we drop about 2 degrees or so in the 1st 15 minutes of use and another 2 degrees in 20 to 30 minutes.
Could you use this say -10 or -15 winter temps?
It is back in stock at Walmart.com. The link is below.
Hi there. How do you access the filter to clean it? Is it housed under the motor? Would you have to lift motor to get to it? Thanks
Check out my other videos.
Can you please tell me where I can find the chlorine tablets at and what type.. I can't find it in the book and normal ones don't work???
We went to our local Spa dealership and had a water test done and bought what they recommended.
Question - I got the hose hooked up and I have lights but nothing happens when I push the buttons??
The buttons don’t seem to depress at all, do yours? Thank you!!
Make sure you hit the unlock button. If you do not unlock it none of the buttons will function.
Same problem did you fix issue ??
Hold the unlock button for 3 seconds, then the other buttons will become functional.
Yes , i tryed holding power button a few times , then all of sudden it started working
Thank you for the helpful videos. We just got ours last Tuesday. It’s running and nice and hot!!
Do you know what the extra part is above the filter and chemical containers? I’ve been searching and I don’t see a reference to it.
Thank you in advance
~The-Jeff
Yes it is. In one of my other videos I cover it. I do not use it.
What is it!
@@laceyrooney72 I still don’t know. I didn’t see it referred to it the videos
@@bigtim208 looked through all your videos and could t find what it is
Do you still like it after a week or so? I’m looking at buying this model. Thanks
Absolutely love it!
We have had ours alittle over a week and have used it every evening and we LOVE IT!!!!
@@jimmymcnelis1310 Congrats! We love ours as well.
Can you tell me how long the power cord is from the motor
ours came with no instructions-can you upload them by chance-we can't seem to find the piece to inflate it-it won't fit in the hole.
I have mine outside end it is cold out but I can I get a pass 95° it’s been almost 2 days of heating to get it where it’s at now I have an override it to 104 but staying right at 95
Is there a drain plug where o can connect a hose and empty it out? I’m using it as a baptismal tank
Yes it does. Lol... I'm sure you could find a less expensive option than a blow up hot tub.
@@bigtim208 it’s actually very logical! Haha
Man I wish you could help me buy this exact model I cannot find it ANYWHERE😞
Does your heater turn off when the water hits set temp? Or does it just stay on making noise?
It stays on. It does not make much noise.
@@bigtim208 Ah okay so it's normal.. just making sure, don't want the electric to be through the roof lol
Mine is taking a long time to reach temp. Second day. And it’s 90 degrees.
@@eliasgonzalez3780 Sounds normal depending on how cold your water was. Heats up 2 to 3 degrees an hour.
@@eliasgonzalez3780 It highly depends what temp your water started at.. took me 24 hours starting at 65F, mind you I also highly insulated my tub. I put it on insulation foam boards, wrapped the pipes with pipe foam, wrapped the tub in reflective insulation and also put the heating pump in a box with insulation. There's a reason it takes so long.. it doesn't draw much power, that's why you are able to put it on a normal outlet and not blow your circuit. It's normal for it to take so long if you have no extra insulation in the middle of winter.
Do you fill the floor part with air? Can’t find anything in the pamphlet
Nope.
Whats that valve for in the bottom?
Can you plug this item in to a regular house outlet?
Yes it is a 110v plug in.
did it come with pump cover?
No
What is the length of the power cord that you plug in to outlet?
I have not measured it. 6 to 8 feet if I had to guess.
Any chance you can tell me the dimensions of the box?
I just got mine live in pa how is it in winter plz let me no
Should be fine with the Freeze shield.
Hey can anyone explain what the thing is above the tablet dispenser? You have the filter at the bottom, then the tablet dispenser then the thing closes to the top... what is thatm
I don't know.
Damm i need to know too! I think its termometer
How do you install the lights
The part for the chemicals how do you use that?
I don't use it.
Il est rendu a 1000$? Se ne doit pas etre le même model qua 298$?
Yeah it is.
What kind of chemicals did you use
I did a video on the chemicals I use. Feel free to check it out.
Hello, how long did it take the water to get hot?
I think he said like 8 hours
It heats up about 2 degrees an hour.
Does the heat turn off with the bubbles going? Most of these don't have heated bubbles. I am hoping this heats the bubbles
It does have heated bubbles. The heater does stay on when the bubbles are running but it still does lower the temperature. I can get 30 to 45 minutes of above 100 degrees out of it even in sub 40 degree temperatures.
Hey I bought one but my say 13 c and it won’t turn on to blow it it doesn’t do anything
Contact support. I just do videos of these man.
How do you put the LED lights on it?
Check out my other videos.
It's a very hard job I would say it takes 2 turn the hot tub over and feed threw the slots like an belt would go on
Is anyone having an issue with getting it to heat past 99 degrees?
Brand new and cant get it to 104 degrees?
I tried unplug, wait til it drops 91, then plug back in, but still holding at 99
Mine got to 104 after the first day 😬
How cold is it where you are located?
Hey Tim I just got my tub is will the bottom inflate all through the same nozzle?
The bottom does not need to be inflated.
Ugh mine won't fill...sides are inflated
@@beetgarretiy8648 What won't fill? The bottom does not get filled up with anything. Just the lid and the sides.
@@beetgarretiy8648 The only thing on the bottom of the tub is the drain plug. Please don't tell me you were trying to fill the bottom of the tub. Lol
The floor or does it fill when gets are on?..Don't mean to sound dumb but just got it up today..
Where do you put lights
They install under the tub where the air goes in.
Does anyone else have the issue where that large orange warning label at the bottom came off within a few days?
Lol. You should have taken that off before filling the tub.
Im having trouble with mine , when i plug it in it just says 17 and none of buttons work , just trying to inflate it . Can someone help please !!!
Sorry I have not experienced any issues. If you find out what caused it please fill us in.
Hold the lock/unlock button for 3 seconds, then all the buttons will become functional.
Is it a 110 or 220 volt
110v
Do you need a special adapter for the plug or does it plug right into your outlet?
It plugged right into my outlet.
@@bigtim208 Thanks! I was reading somewhere it needed a special plug or adapter.
Can I use this with GFCI extension cord?
I got it for Black Friday today $300
Same here
Mine was last Monday and picked it up Wednesday
Me too!
Congratulations I hope you all love it!
Ours is Tami g for ever to warm up. The temperature here is 28 degrees
You didn't actually show how to do anything
Jeez I've just paid £399 in 🇬🇧 ON SALE!!!
$474 🤬
I would have paid more after owning one!
I can't fill the floor with air did you
No air is added to the floor. It has a squishy soft feel to it and is not needed.
Code 302
www.walmart.com/ip/SaluSpa-Hollywood-AirJet-Inflatable-Hot-Tub-Spa-with-LED-Lights-4-6-person/114322519
commentaires francais