How to Change Oil and Filter on a G37
HTML-код
- Опубликовано: 15 дек 2018
- Pretty easy job! Not as pleasant on a temperature of 40F outside.
This is what I used:
amzn.to/2I7niDv - Mobile 1 Synthetic oil 6 Quart. Enough for your change
or get a couple of this and save some for the next time.
amzn.to/2UXRylY - Mobile 1 Synthetic oil 5W30 5 Quart
amzn.to/2RmstCT - Click Torque Wrench
amzn.to/2X0d5fu - K&N Performance Oil Filter
amzn.to/2BZ5mVj - Socket Set up to 32mm
amzn.to/2E8Zlrn - Garage Rags Red
amzn.to/2UW3sN0 - Oil Funnel
amzn.to/2tjHZlp - Oil Drain Pan
Get some cool Car Mods Merch and help support the channel
www.carmodsgarage.com/shop
Contact:
marcos@carmodsgarage.com
Instagram:
@carmodsgarage
Twitter:
@garage_mods
www.carmodsgarage.com
Building cars for fun.
•••••••••••• Music By •••••••••••••
MÖWE - Birds Flying High
soundcloud.com/m-we-1/mowe-bi... Авто/Мото
great simple vid my friend. Thank you
Thanks my friend. I appreciate your comment.
great video
This waa so helpful but maybe I missed it, you have to change the crush washer. I also had the missing emblem, I thought it was just my car. Thanks, I just starting changing my own oil due to the price increases.
Ya change the crush washer if you can. It gets much cheaper doing it ourselves. I'm glad I could help! Remember to be safe and put some jack stands before going under the car. 👍
Lol my emblem is missing to lol
Do you know what capacity jack stand will work to jack up both the front wheels like you did in this video? Will a 2 ton jack do the job? Thanks.
Yes 2 ton is perfect!
The engine holds 5.2 quarts. That's 5 quarts and about 6.5 ounces. When you pour it all in it's gonna show a little over full on the dipstick because it hasn't gotten into the filter until you start it up.
do you need to replace the drain plug? i see some ppl do that and do you think thats necessary?
No you don't need to unless it's leaking oil. You could replace the washer also if it's leaking. Only don't tight more than necessary
@@CarModsGarage thanks!
Great video
🤙 thank you!
I changed my oil by myself and now my transmission is slipping you have any idea why
that's not related to oil change. if the transmission is slipping it is because the clutch disk is going bad assuming you have a manual transmission
@@CarModsGarage nope got an automatic it was fine before I did it I added 5.5 when it said 5.2 but didn’t think it was even that
@@CarModsGarage but was good before the oil change so that’s why I’m so confused
@@Emilio_aruiz there is no connection (oil connection) between engine and transmission. Unless you removed the transmission oil but then you wouldn't be able to add all that oil to the engine.
So you went under the car and took one bolt out. Did you mess with any wiring or other bolts?
@@CarModsGarage just that bolt and filter didn’t do anything else that I think of that’s why this is so confusing
I have a infiniti g37 a BMW 335i and a Lexus RX 450h Lol we having very similar cars
That's so awesome. I want to get a 335i to mess around but I need to finish my current projects so I can make a nice 335i.
what year is your g37?
It was 2010 or 2012 I can't remember.
@@CarModsGarage thanks for the response!
My jack is 4 Inch to 10 inches
Wouldn’t fit my G. What can I do?
if it is because you car is too low I would get a large board and drive on it so it would lift the car a bit then you can fit your jack in there. I would not go under the car without a stand though.
You gotta get a low profile jack, I got two, one from Harbor freight and a Big Red from Pep boys, I like the Harbor Freight Aluminum one better.
Ya I have one from Harbor Freight also. They work great.
what year your g37
2013
Where can I buy that missing Infiniti badge
found this one one eBay. Hard to find only the badge if not on a wreck yard
ebay.us/bHWqMX
Infiniti sells it separately
It boggles my mind when people know their car takes a certain amount of oil and they still under-fill it then check the dipstick, knowing it's gonna be low!!!
Are you a woman?
166oz people
Terrible
Like your mom