Hey man just wanted to thank you this has been a huge help! Thanks for taking the time to explain exactly what it is you're doing, lots of videos just quickly brush over things but this was insightful. I hope this serves as some motivation for more vids 🙏✊
Thanks Brian! I am pretty picky when it comes to track. But you knew that already didn't you? I think you were a brick layer in your past life. HAHAHAHA
+Deryk Glass you know I was going to ask you where your bricks were that you used to hold down your track but I didn't want to cause you to have heart failure!!! Hahahahah!!
@@DGModelworks Thanks for the reply and source. I'm looking for thinner sheeting for yards/sidings/etc so as to not have it all raised like the mainline which I'm using cork roadbed for. Appriciate it!
Fantastic informational video Deryk. Your layout is looking good. Exciting weekend for my layout - I unpacked all remaining trains and started laying turnouts and track. Things should start moving quickly now until I get to the scenery stage.
I would make a marking gauge that fit over the existing track and hold a marker the appropriate distance. Place the track following part of the gauge on the existing track and Mark the centerline of the new track. Works on the inside or outside of the existing track. Laying out the first track is another matter.
I'm using your method of track laying and putting down my cork road bed on a foam sub road bed/base! As a newbie to the hobby,I have found your method to be the easiest for me to go with. I need to line my track,and then put down the cork road bed. I'll be watching your video on putting down the cork road bed as well.
+NorfolkSouthern643 Laying roadbed is pretty straight forward. Draw your track center line, separated the roadbed halves, and lay one on each side of your track line. Here are some videos of mine on roadbed and track laying. ruclips.net/video/mq2DOtv0fiM/видео.html , ruclips.net/video/ShCR3oZwPKg/видео.html , ruclips.net/video/avcjX1xe04s/видео.html
Watching you make the twin curve and all that measuring made me think if I had a 3 axel truck I could then use the center screw hole as my leadhole and apply a short painter stir stick. Screw the stick thru the truck hole and have a hole in the stick at the distance one wants to lay a new track. Sort of following your radii stick idea. . just drag a pencil as one moves the truck down the rails
No, I use the cork sheets for yard areas and industrial areas. And the roadbed strips for mainline. In the Video i'm using the roadbed strips just to draw center lines in certain areas. Hope that helps to answer your question
Thanks for the great video. I laid out a double oval using AnyRail and then cut the center line into Homasote on a CNC router. It would have worked great except that AnyRail doesn't seem to have the turnouts drawn correctly. As a result, my inner oval does not tie in correctly to my outer oval. Pretty frustrating, but it's a process I guess.
I loved the 3 yard stick method I may do that but right now I have my O gauge trains down for christmas that my father gave me I am going to run HO next year I cant leave it up because I live in apartment dont have much room the trains are on my 3x5 kitchen table with sound board on top but i was able to come off the table a little at 64x44 inches
I got it at www.midwestmodelrr.com but it appears they are sold out at the moment. BTW you can save 5% off any regular price purchase there by using coupon code DGMODELWORKS
good video and good tips will definitely help me out on some of my future projects. keep up the good work dude can't wait to see that diesel house up and going.
Great how to !! How about using the clear ruler next to your track to make sure it's straight along with the eye.. Thanks for sharing and keep up the great work.. Lance 🚂 Keep them videos coming...
Yes you can do that too. But it's not always easy to do, because turnout ties aren't always the same length. It's also more difficult if you are using the stiffer brand of flex track. For example it works well for Atlas flex, but not as easy on ME. But that's just my opinion, with the experience I've had.
Have you ever tried the Tracksetta track gauges available tnrough Peco, they are available in several different radi and a 10 in straight fit right between the rails to form the curves! Peco also do a track spacing tool one side for correct 6ft way the other for more liberal track spacing!
Great video Deryk! I always like to see how different people do their track work and you and I are on the same page. Just curious as to where you found those large pieces of cork at as it really works out great, so glad to see you back into model railroading as you look much happier and relaxed,. Thanks for sharing and looking forward to next video!
This looks simple, it's not. Thanks. I tried the black foam. Cork costs a little more, sure is worth it. First of all, you can do exactly this. Cork, more stable, doesn't change elevation when glued, ballasted, or under stress from track laying. Thanks again DG. Going to lay some track now that you got me pumped up.
So It seems much simpler to just freehand the curves and make sure they arent too sharp with a piece of sectional, that seems like what your doing? When do you use trammel for your layout? I'm new was going to pim yarn where I wanted track to design it
I use a trammel for all the curves that need a certain radius. Some of the track lines are done free hand. Once you have a point of reference it isn't too hard.
Good info. Your mojo must have texted my mojo, because I'm back to noodling with my layout too :) My Walthers info shows that turnout (no. 6.5?) as 24" outside, 20" inside
Awesome man! Glad you are back to work too! Yes you are correct on the Walther's info, but I still think the inside radius ends up being closer to 18" . For some reason Walther's miss judges the inside diverging route.
Hey bud! Sorry I haven't been around lately. My job has been keeping me super busy. I haven't had time to do anything with the hobby. Hopefully I will be back soon. ~Deryk
Yes, Micro Engineering code 83 rail is narrower than most other manufacturers. Atlas N Scale code 80 rail joiners work perfectly! Micro Engineering joiners are more expensive. And Atlas HO joiners are too big.
Great video Deryk, Well im going with micro engineering track and turn outs. I like the looks of it. One Question about the track, What did you use to shape your track? I know MLR Mfgs made a tool but they discontinued it i'm hearing and I haven't had any luck finding one either any thoughts ?
All that may be true, but most of all railroads are going to concrete ties. I believe atlas is the only company with concrete tie super flex. For that reason I think there better, that's my opinion..
Very well explained .If you use a mirror you can see if you're track is in line without craning your neck
Hey man just wanted to thank you this has been a huge help!
Thanks for taking the time to explain exactly what it is you're doing, lots of videos just quickly brush over things but this was insightful. I hope this serves as some motivation for more vids 🙏✊
Thank you for the compliment, and I'm glad it could provide helpful info! I appreciate the feedback.
Daryk..have watched a number of your videos...they are always straight forward and easy to follow ..thank you for taking the time to share.. Tom
This was a great video Deryk!! Lots of great tips for flawless track laying. Thanks for posting this, buddy and have a great day!
Thanks Brian! I am pretty picky when it comes to track. But you knew that already didn't you? I think you were a brick layer in your past life. HAHAHAHA
+Deryk Glass you know I was going to ask you where your bricks were that you used to hold down your track but I didn't want to cause you to have heart failure!!! Hahahahah!!
Too funny! LOL
I like the idea of soldering 2 pieces of flex together first , then lay it , thanks for the tips ,
Great Video Deryk !!! I especially like the Trammel and the tip on removing extra ties and sliding them all the way on the rail.
Barry
Great informational video and tips. Love the Trammel idea! What thickness of cork sheeting did you use for the yard areas?
Thanks! The cork is 4mm thick. I get rolls of it at Hobby Lobby. Its not quite as thick as the Midwest roadbed cork, but its close.
@@DGModelworks Thanks for the reply and source. I'm looking for thinner sheeting for yards/sidings/etc so as to not have it all raised like the mainline which I'm using cork roadbed for. Appriciate it!
Fantastic informational video Deryk. Your layout is looking good. Exciting weekend for my layout - I unpacked all remaining trains and started laying turnouts and track. Things should start moving quickly now until I get to the scenery stage.
That's great news! Get busy my friend!
This video is extremely helpful! Thanks Deryk! I'm getting ready to start building a layout and this helped me a great deal.
Appreciate your tips for laying track and other insights on this great hobby! Great work!
Great track laying video. Me, I lay track by the seat of my pants. Without a track plan or any plan at all, the layout goes in many directions.Scott
I do the same thing 😀
I like the way you made the Trammel, good ideal !
Tom McPherson I wish there was more on how to use that trammel.
Yes , using a mirror gives you a VERY good view all the way back down your track .. Well said Derek .
I would make a marking gauge that fit over the existing track and hold a marker the appropriate distance. Place the track following part of the gauge on the existing track and Mark the centerline of the new track. Works on the inside or outside of the existing track.
Laying out the first track is another matter.
Seems simple enough but seeing it really makes a difference!! thanks..
The yard stick trick is sick!
Thanks man!
Thanks for some very useful tips. Martin (Thailand)
I'm using your method of track laying and putting down my cork road bed on a foam sub road bed/base! As a newbie to the hobby,I have found your method to be the easiest for me to go with. I need to line my track,and then put down the cork road bed. I'll be watching your video on putting down the cork road bed as well.
+NorfolkSouthern643 Laying roadbed is pretty straight forward. Draw your track center line, separated the roadbed halves, and lay one on each side of your track line. Here are some videos of mine on roadbed and track laying. ruclips.net/video/mq2DOtv0fiM/видео.html , ruclips.net/video/ShCR3oZwPKg/видео.html , ruclips.net/video/avcjX1xe04s/видео.html
NorfolkSouthern643 n
Just found your video. I used my camera tripod and attached the trammel to it
Awesome!!!!
Amazing video. Thank you!
Thank you too! I appreciate it and I hope it helped you out.
love your tips please keep them coming many thanks
Thank you Peter!
+DG Modelworks could you do a video showing us how to power sections of track synced to a remote control?
Realest1979 Yes I too would like to know that
Great video my friend.
Watching you make the twin curve and all that measuring made me think if I had a 3 axel truck I could then use the center screw hole as my leadhole and apply a short painter stir stick. Screw the stick thru the truck hole and have a hole in the stick at the distance one wants to lay a new track. Sort of following your radii stick idea. . just drag a pencil as one moves the truck down the rails
Are you laying cork roadbed on top of your corked tabletop leading up to your garage? Thanks, very helpful video.
No, I use the cork sheets for yard areas and industrial areas. And the roadbed strips for mainline. In the
Video i'm using the roadbed strips just to draw center lines in certain areas. Hope that helps to answer your question
Excellent video
Thank you very much!
Thanks for the great video. I laid out a double oval using AnyRail and then cut the center line into Homasote on a CNC router. It would have worked great except that AnyRail doesn't seem to have the turnouts drawn correctly. As a result, my inner oval does not tie in correctly to my outer oval. Pretty frustrating, but it's a process I guess.
Excellent ! This has helped me a great deal. I thank you very much for taking your time.
I loved the 3 yard stick method I may do that but right now I have my O gauge trains down for christmas that my father gave me I am going to run HO next year I cant leave it up because I live in apartment dont have much room the trains are on my 3x5 kitchen table with sound board on top but i was able to come off the table a little at 64x44 inches
Thank you for your demonstration, very helpful for a novice like me. But where did you get your engine maintenance shed please
I got it at www.midwestmodelrr.com but it appears they are sold out at the moment. BTW you can save 5% off any regular price purchase there by using coupon code DGMODELWORKS
Great video, looking forward to laying out the tracks now
good video and good tips will definitely help me out on some of my future projects. keep up the good work dude can't wait to see that diesel house up and going.
Great how to !! How about using the clear ruler next to your track to make sure it's straight along with the eye.. Thanks for sharing and keep up the great work.. Lance 🚂 Keep them videos coming...
Yes you can do that too. But it's not always easy to do, because turnout ties aren't always the same length. It's also more difficult if you are using the stiffer brand of flex track. For example it works well for Atlas flex, but not as easy on ME. But that's just my opinion, with the experience I've had.
Have you ever tried the Tracksetta track gauges available tnrough Peco, they are available in several different radi and a 10 in straight fit right between the rails to form the curves! Peco also do a track spacing tool one side for correct 6ft way the other for more liberal track spacing!
I tried some from different manufacturers, and I think they are crap. I think my way works great, without having to spend money on those things.
Rock on Mr Mojo!!!! This video will be very helpful.
Made it just for you brother! hahaha
Great video Deryk! I always like to see how different people do their track work and you and I are on the same page. Just curious as to where you found those large pieces of cork at as it really works out great, so glad to see you back into model railroading as you look much happier and relaxed,. Thanks for sharing and looking forward to next video!
Thanks David! I buy the cork pads from Hobby Lobby. They come in rolls...
Hi Deryk thanks for your videos they have been very helpful, did you do one on how to make the trammel? Thanks
I need you to back up to laying the cork roadbed and how you installed the initial line used as reference points. Thank you.
It should be in some previous videos. I will try to look for it.
Great tip's for track laying
Cheers Glynn
Thanks Glynn!
This looks simple, it's not. Thanks. I tried the black foam. Cork costs a little more, sure is worth it. First of all, you can do exactly this. Cork, more stable, doesn't change elevation when glued, ballasted, or under stress from track laying. Thanks again DG. Going to lay some track now that you got me pumped up.
Thank you!
great video
nice work I see you went with 2 1/2 inch center's but very nice can't wait to see it in operation
Excellent video. I will build one of those trammels for curves. Like another viewer, I design by the seat of the pants!!! Muse
Very helpful.
Good one, great ti[s and ideas..
So It seems much simpler to just freehand the curves and make sure they arent too sharp with a piece of sectional, that seems like what your doing? When do you use trammel for your layout? I'm new was going to pim yarn where I wanted track to design it
I use a trammel for all the curves that need a certain radius. Some of the track lines are done free hand. Once you have a point of reference it isn't too hard.
great great tip's brother very nice update !!!!!
There is nothing wrong with being particular. Great Video Thanks for Tips.
Also its a expensive hobby so low and slow.
Great video and tips!
is the yard lead behind the engine facility going to connect to the main at the lift out bridge? would make a great huge run around/ passing track.
No it isn't.
+Deryk Glass right on, looking good man
+Grimm13 Thanks man! That is a good suggestion though. Maybe something to consider at a later time.
+Deryk Glass no problem, one additional turnout could make a huge difference.
Very nice job. Great lesson! :)
Thank you!
I think extra time spent doing track pays dividends later...rushed track causes loss of power, dereailments etc...
I agree!
Great video
But what is radius of outer curve
OH jeez, I'm not 100% sure now. Maybe 27"
Do you ballast your turnouts? I was only asking because what you were saying about changing them out if needed.
Yes I do. When you remove the old turnout, you have to scrape up the old ballast. Then reballast the new turnout.
Good info. Your mojo must have texted my mojo, because I'm back to noodling with my layout too :)
My Walthers info shows that turnout (no. 6.5?) as 24" outside, 20" inside
Awesome man! Glad you are back to work too! Yes you are correct on the Walther's info, but I still think the inside radius ends up being closer to 18" . For some reason Walther's miss judges the inside diverging route.
What track planning software you use?
The track plan was made using Anyrail.
Thankyou , great lesson !
nice model train video.
Hi just checking on you how you been love to see some of your videos
Hey bud! Sorry I haven't been around lately. My job has been keeping me super busy. I haven't had time to do anything with the hobby. Hopefully I will be back soon.
~Deryk
Know Derek you are not just another pretty face. Great explanation on this.
Thanks Big Bill! I'm glad I have a lot more going for me, than my good looks. LOL
My Advise is this And It will Help Don’t Rush it give Yourself Maybe 6 Options to Go with.then Go with it.
Are those N-Scale jointers that your useing ?
Yes, Micro Engineering code 83 rail is narrower than most other manufacturers. Atlas N Scale code 80 rail joiners work perfectly! Micro Engineering joiners are more expensive. And Atlas HO joiners are too big.
I'm a little OCD myself (Virgo), what make and length do you use for your curved track or did you use a flex track?
I used flex track. Thanks for watching!
I'm in the process of designing a layout. Where how did you get your colored train plans?
That is my track planned that was designed by www.thetrackplanner.com
DG Modelworks ok cool thanks
Great video Deryk, Well im going with micro engineering track and turn outs. I like the looks of it. One Question about the track, What did you use to shape your track? I know MLR Mfgs made a tool but they discontinued it i'm hearing and I haven't had any luck finding one either any thoughts ?
Thanks Joe! I just shape my track by hand.
I think Walthers has the best turnouts just because all rails are powered except for the frog. which is easy to do
All that may be true, but most of all railroads are going to concrete ties. I believe atlas is the only company with concrete tie super flex. For that reason I think there better, that's my opinion..
any layout updates yet. like to see what you have done it's been a while
No layout updates yet. Haven't done anything on the layout. Sorry :(
What do you use for the roadbed?
Midwest Cork Roadbed for the mainline and sheet cork for the yard areas.
is that horseshoe curve at the start of ur video
Yes it is. :)
@@DGModelworks u live in pa. That's about 2 hours from me
plastic thumb tacks work great on wood
couldn't you just rig a marker to a car and use it to make the track line?