Alfred, yes, but folks shouldn't get in there unless they are experienced disassembling the Daisy pump platform. You are a veteran gun user, so you likely could do it, even if you have never taken apart these pump guns. Just PLEASE follow my bullet points in the "more" section under video screen.
Hello, I am thinking of making a type of compressed air cylinder in the tube of the valve with my Daisy 880 to replace the pumps and make it compressed air. I will let you know if I can complete my project👍🔨📝
hey man I saw you video on the bsa model 1910 from 4 years ago and I was wondering if you knew where to find a manual for the 1910? I got mine a years ago and lost the manual and now that im older I’m mature enough to actually want to take care of it since it is discontinued. If not could you make a video on how to take it apart/ put back together completely and proper service? Would really help. Thanks
Here are some videos. They cover the 2840 and the brown 1910. On lubing, just a drop of 30 ND at 500 shots. Some go 1000 shots. There is much less stress on the pump head than a multi pump. ruclips.net/video/GW-f-iX1cKI/видео.html ruclips.net/video/JI5K1VvogLs/видео.html ruclips.net/video/yn6Ydoaxohg/видео.html
NO WAY. WD-40 is a penetrator with mineral spirits. Like paint thinner. I like WD-40 for cleaning dirt off garden tools and wiping off light rust. Use these products for your 1910: www.hobbylobby.com/Art-Supplies/Painting-Supplies/Palettes-Tools/Squeeze-Bottles/p/57415 www.oreillyauto.com/detail/c/pure-guard/pure-guard-compressor-oil-4-quart/pgd0/ac18
Edgar, don't load it with pellets. Pellets means wadcutters or lead ammo. Just NEW BBs. Sometimes bad BBs can jam loading ramp. Try these help videos: ruclips.net/video/qFb13cG3a5I/видео.htmlsi=0RBswGJmwMcB-c86 ruclips.net/user/shortsfPSYDXXOD7o?si=J7QMxIVGv8q_01cy ruclips.net/video/rNXE7-fhelg/видео.htmlsi=oVv77pADHciQjG0k
I think I made a mistake, I went to fix my red ryder that I have had for a while and I just took the screws out took it apart and when I went to pull the trigger out it pulled in and I have tried to pull the anchor and I cannot pull it out no matter how hard I try
Because the Evetibilt is Hella smooth. It does twang and is easier to cock. As long as the gun shoots, enjoy it. If you did the Everbilt ONLY to test it, you can always switch back to stock spring. The Everbilt videos are for those who damaged the OEM and need a solid replacement.
The targets Speak volumes of the importance of a good smooth trigger for accuracy. Very well done.
Alfred, yes, but folks shouldn't get in there unless they are experienced disassembling the Daisy pump platform.
You are a veteran gun user, so you likely could do it, even if you have never taken apart these pump guns.
Just PLEASE follow my bullet points in the "more" section under video screen.
Hello, can you make a video on fixing the loading gate on the red ryder? mine won't open
Many times, it is only mechanical.
Give it a good shake, holding it by the barrel, and remember to PUSH IN the gate, then UP.
Hello, I am thinking of making a type of compressed air cylinder in the tube of the valve with my Daisy 880 to replace the pumps and make it compressed air. I will let you know if I can complete my project👍🔨📝
Go for it!
hey man I saw you video on the bsa model 1910 from 4 years ago and I was wondering if you knew where to find a manual for the 1910? I got mine a years ago and lost the manual and now that im older I’m mature enough to actually want to take care of it since it is discontinued. If not could you make a video on how to take it apart/ put back together completely and proper service? Would really help. Thanks
Here are some videos. They cover the 2840 and the brown 1910.
On lubing, just a drop of 30 ND at 500 shots. Some go 1000 shots. There is much less stress on the pump head than a multi pump.
ruclips.net/video/GW-f-iX1cKI/видео.html
ruclips.net/video/JI5K1VvogLs/видео.html
ruclips.net/video/yn6Ydoaxohg/видео.html
@@daisy880fanaticfixit9can I use wd40?
NO WAY. WD-40 is a penetrator with mineral spirits. Like paint thinner. I like WD-40 for cleaning dirt off garden tools and wiping off light rust.
Use these products for your 1910:
www.hobbylobby.com/Art-Supplies/Painting-Supplies/Palettes-Tools/Squeeze-Bottles/p/57415
www.oreillyauto.com/detail/c/pure-guard/pure-guard-compressor-oil-4-quart/pgd0/ac18
Hello, my daisy buck 105b won’t load the pellets and I took it apart too see if anything was wrong but now it doesn’t cock all the way sometimes 😢
Edgar, don't load it with pellets. Pellets means wadcutters or lead ammo. Just NEW BBs. Sometimes bad BBs can jam loading ramp.
Try these help videos:
ruclips.net/video/qFb13cG3a5I/видео.htmlsi=0RBswGJmwMcB-c86
ruclips.net/user/shortsfPSYDXXOD7o?si=J7QMxIVGv8q_01cy
ruclips.net/video/rNXE7-fhelg/видео.htmlsi=oVv77pADHciQjG0k
Good Morning. I’m looking for a Daisy pistol for plinking voles & moles…any recommendations
Sir, when you say plinking, do you mean just CHASING them away. Daisy doesn't currently have a great line of pistols for hunting.
I think I made a mistake, I went to fix my red ryder that I have had for a while and I just took the screws out took it apart and when I went to pull the trigger out it pulled in and I have tried to pull the anchor and I cannot pull it out no matter how hard I try
Did you use 10-inch jaw-lockers?
Try this:
ruclips.net/video/0uCgA848t28/видео.html
When I’m cocking it back how come I do hear a click and it’s hella easy to move
Because the Evetibilt is Hella smooth. It does twang and is easier to cock.
As long as the gun shoots, enjoy it. If you did the Everbilt ONLY to test it, you can always switch back to stock spring.
The Everbilt videos are for those who damaged the OEM and need a solid replacement.
*I have yet to find a rifle that doesn't like the J$b heavy$!*
_Okay maybe a very low power airgun would like them too much._
Yeah, a single pump would just spit out a JSB Heavy. Waste of great pellet.