Just my 2C from my own experience here. Make up an exhaust pipe to go on the silencer to route out via the back of the car. As currently the oils coming out of the exhaust will get on the rear tyre. I learned this the hard way and making up a routed exhaust fixed the issue and no more loss of traction.
😊🙏 Fantastic work there 3:16 RC ... Thank You So Much for the efforts & for sharing! Michael Schumacher : The Ferrari Red Baron 7th Times F1 World Champion Forever! 🌷🌿🌏💜🕊🇮🇹
A month ago I purchased the FG BMW E30 (the basic one with a 510 mm wheelbase)... The rear-wheel drive is something unique. In the 1/5 category I learned that the first investment to make are tires... and patience. And now I see a huge Formula One RC. I'm going to have to do some extra work to even purchase this LOL
This is so cool/awesome/insane. I had/was into RC (battery) when I was younger (10-12). I couldn't afford the fuel running RC. I had no idea RC world build was this insane. What does this RC world cost if someone like myself were interested in getting/building an RC at this level? TIA... Very Cool RC, I'm glad I came across this video.
Thanks for your comment. You can get in the hobby with the less inexpensive 1/5 scales from places like fearlessrc.com You can get an HPI buggy clone ready to run for like $500. Cost only goes up from there when you move up to the more elite brands like Losi, Kraken, HPI and MCD especially is you start adding upgrades to your rig.
Just as a recommendation. Instead of tilting your model to get fuel in it, try getting a syringe. It would be easy to angle over the car. And you could easily attach some tubing to it as well to get a better angle.
Does it have a servo failsafe for the throttle? The rear tires seemed to be toed in too much. I wish there was a way to get those hoses to follow the front upper wishbone into the chassis. The way they were I was kinda like ugh.
Yes, I have a throttle cut programmed in the radio plus an engine kill switch on radio loss. Can also activate kill switch from radio. I haven’t done anything with suspension adjustment yet. I’ll do that when I get it to the track.
@@mikemoultrie8829 Is your servo linkage correct? That back should be just a tad loose with no throttle. Free spin the front with the wheels off the ground then apply break. They should stop hard. Check cables. What braking power% do you have set in the transmitter?
Here's an idea, i 0:14 nstead of a more user-friendly gas can w/ a funnel, how about making an elevated gas can tripod with a valve at the bottom and some tigon fuel line?
So awesome!!.. and i like how yoi did the slow pulls on the new motor.... I just ordered same car.... where do i get the air intake.... and any other upgrades.... you and i think alike.... that intake is ugly stock
I am pretty sure that this is more or less the standard version of the FG F1 car. I own the same, but i have upgraded nearly every plastic part into Aluminium. The vertical chassis plates are available in cfk. I also replaced the into cfk. But nevertheless my car is not competitive with the competition f1 car from FG.
Hi everyone, are the any other 5th scale Formula 1 car out there besides FG so I can compare with? Also the same question for 8th scale, and 10th scale and electric. I'm new to F1 cars and can use some guidance.
I think between healing people and doing other miracles Jesus would be doing RC! Well maybe? You did a good thing naming your channel i had to subscribe. I do cars planes and Helicopters the most. I had a 1/4 scale boat years ago but im not into boats.
@@RedNinjaGaiden Yes, I always remove any metal to metal screws on all my RCs and check for thread lock. FG did a good job locking all the screws. I did tear down the diff and replaced with my favorite “Fast Eddy” grease although what FG had in there was sufficient.
Damn beautiful is the word,HAVE TWO FGS CARS 30.5 MARDAR VW BODY AND OLDER 8 SHOCK OR 2 PER CORNER TRUCK I WISH I KNEW HOW TO SEND A PICTURE OF THEM TO YOU. DDM AND GERMANY ONLY PLACES FOR PARTS?? GOD BLESS BROTHER AND FAMILY AL YAKIMA, WA
Just my 2C from my own experience here. Make up an exhaust pipe to go on the silencer to route out via the back of the car. As currently the oils coming out of the exhaust will get on the rear tyre. I learned this the hard way and making up a routed exhaust fixed the issue and no more loss of traction.
Thanks for the tip.
This scale is kinda growing on me. Beautiful work man
Mechanical art! Beautiful model
Wow! I love F1,R.C. and big scale. Well done.
That looks awesome! First pull started 👍 Thanks for sharing 🙂
Fired right up. So far it’s running well. Easy to spin out!
love that you started it facing a fence. nice back up!
😁😁😁
Very nice looking, I love how the body looks on the chassis, the complete car look amazing 💯💯💯 thanks for the mention 👌👌
Your not the fastest guy 😂 but good things are worth waiting for! 🖌️ The body is a work of 🖼️
I will change the name for The Turtle Rc paint hahaha, I'm glad you like the paint job 🐢
absolutely beautiful machine
Really amazing build!
Great job! Beautiful car!
Very nice. Love the scale formula cars
Awesome car brother that thing is beautiful and you brought that idle right on down to happy! God bless you my friend thanks for the shout out!
Thank you brother Jeff and for the tip on setting idle. Thanks for giving us that tip. I’m glad to share it. God bless brother!
Super great looking rig another win for the hobby 👍👌✔️
Awesome thanks 👍🏻
That is the ultimate RC car right there! So awesome! As a fan of F1 I salute you my good sir.
Subscribed.
Wow! Thanks
Big F1 fan here. That's a real beauty. Great job!
Thanks for stopping by!
@@316RC No problemo.
nice kit. reminded me of that Frenchman that built every single part of a Ferrari 312 PB , even the tyres
Sweet ride, I may have to rebuild something in storage
Wow nice build and a beautiful car
Thanks
Total dream build. Id build it and just stare at it
Thanks for the video. I miss the RC life. I still own many of the cars and stuff, but I doubt I’ll ever run them again
Your welcome. Why never run again 🥹
Looks and sounds epic. I can practically smell the fumes. FG look awesome, definitely on the wish list.
Great vehicle!
Very nice job !😊
Thanks it’s pretty cool!
Nice car, have fun!
😊🙏 Fantastic work there 3:16 RC ... Thank You So Much for the efforts & for sharing! Michael Schumacher : The Ferrari Red Baron 7th Times F1 World Champion Forever! 🌷🌿🌏💜🕊🇮🇹
Thanks for the kind comment 👍🏻
A month ago I purchased the FG BMW E30 (the basic one with a 510 mm wheelbase)... The rear-wheel drive is something unique. In the 1/5 category I learned that the first investment to make are tires... and patience. And now I see a huge Formula One RC. I'm going to have to do some extra work to even purchase this LOL
Wow really beautiful!
Thank you Marion!
Wow , outstanding
Awsome car!😍😍😍
Very cool!
Super máquina f1 🏎🔥💥💨😎🥰 lindo carro 🏎❤👏🏻👏🏻👏🏻👍🏻🤛🏼
That’s German quality 😊 I love FG great models and awesome quality ❤
I agree 😀
Time for an update! I hope you are feeling better, and you can show us a video of this car driving now!
Oh wow 😲That's nice Love it 👍🏾👊🏾🤘🏾
It’s pretty RAD
Beautiful car! I believe the fuel tank is like that so that it's all under the body.
Great video. That F1 looks realy nice....
Thanks! Its really sharp. Hope to take it to Wagner Park where Lance runs.
@@316RC wow. That's awesome.
Nice I’m going to have to get back into my RC cars.it been long time.
The fuel tank is oriented in that way so that you have to tilt that car up. It keeps you from spilling gas on it.
Thats one good looking, purdy f1 rc car!
Thank you much. I really like how it turned out!
That is beautiful
Wow, very cool.
This looks fun
Faltou só fazer um vídeo da máquina correndo para a gente ver,abraço!
Very nice 👍
hi bro love the channel 🙏🙏🙏 3.16 ...wow brother this is incredible has to be the best 1/5 scale iv ever seen 😮
Thanks so much 👍🏻 appreciate you tuning in!
Thank you this is cool!!!
Really COOL 👏👏👏👏
Looking good! I loved running mine but no tracks nearby and ended up selling, which I still regret
There’s a track about 2 hours away from me. Hope to take it there
This is so cool/awesome/insane. I had/was into RC (battery) when I was younger (10-12). I couldn't afford the fuel running RC. I had no idea RC world build was this insane. What does this RC world cost if someone like myself were interested in getting/building an RC at this level? TIA... Very Cool RC, I'm glad I came across this video.
Thanks for your comment. You can get in the hobby with the less inexpensive 1/5 scales from places like fearlessrc.com You can get an HPI buggy clone ready to run for like $500. Cost only goes up from there when you move up to the more elite brands like Losi, Kraken, HPI and MCD especially is you start adding upgrades to your rig.
Very nice 5th scale gas RC.. I was waiting to see the body on the car. Having an HPI Baja 5b I can appreciate your choice.
I like them all. Nothing wrong with a 5b. 💪🏼
Super clean. It looks factory.
Looks sweet 👍🏼👍🏼
Thanks 👍
The white helmet will make the car look even better.
sounds better than the full scale ones ))
Just as a recommendation. Instead of tilting your model to get fuel in it, try getting a syringe. It would be easy to angle over the car. And you could easily attach some tubing to it as well to get a better angle.
Good idea 👍🏻 thanks
Gob Bless You!
Nice one. 💥💯💥😉
Thanks 👍
Very Very NIce
Nice car😊😊😊
Thanks 👍
Looks great. Little confused with all the upgrades that you left your 2 cycle exhaust pointed towards your wheel.
its the recommended mounting by manufacture. luckily exhaust does not effect wheel or control
Does it have a servo failsafe for the throttle? The rear tires seemed to be toed in too much. I wish there was a way to get those hoses to follow the front upper wishbone into the chassis. The way they were I was kinda like ugh.
Yes, I have a throttle cut programmed in the radio plus an engine kill switch on radio loss. Can also activate kill switch from radio. I haven’t done anything with suspension adjustment yet. I’ll do that when I get it to the track.
Very nice... where did you buy the upgrade air intake from?
Thanks 👍🏻 Got it from DDM
Nice Allen. That fuel tank is crazy. Lol
Not the best design there. Need a pump 😂. Hope to take it to Wagner Park.
so cool .. love it
You can get cheep hand pumps that last if you take care of them.
Lets drive. Cant wait to see it on go on the road❤
que hermosura de carro
What paint did you use for the backing? Having trouble finding the right type of paint.
You’ll have to hit up my paint guy. JC custom RC paint. You can message him on Facebook or instagram. He’ll know what body your talking about.
Ok.thank you
Hello, do you have a link for the person/company who did that awesome looking body?
JC Custom RC Paint you can look him up on Facebook and Instagram. Tell him I sent you and he will give you a good deal. He's in Georgia
I'm sorry for all the questions, sir. But do you have any videos on adjusting the brakes?
I don’t yet but what are you trying to adjust. The front or rear and what’s wrong?
@@316RC The front end of the back i'm almost done breaking it in it won't stop
Front and back brakes
@@mikemoultrie8829 Is your servo linkage correct? That back should be just a tad loose with no throttle. Free spin the front with the wheels off the ground then apply break. They should stop hard. Check cables. What braking power% do you have set in the transmitter?
Half the battle of buying these cars at this scale is finding a place to use it 😂
Totally agree
Abandoned runway. Maine has an abandoned airbase used for landsailing in the warmer months.
Where did you purchase that AMAZING car from ??? Thanks
DDM www.ddmracing.com/FG-Complete-Cars-Parts-Upgrades
Do we get to see this work of art racing ?
Nice build 👌
Hopefully this summer!
Beautiful car, great job! Where could I buy similar car? Average price? Tracks inUSA for racing? Thanks, keep up the good job.
Thanks 👍🏻. You can purchase one at DDM online. Closest track to me on east coast is Wagner park in NJ. Hope to run it there this summer.
Here's an idea, i 0:14 nstead of a more user-friendly gas can w/ a funnel, how about making an elevated gas can tripod with a valve at the bottom and some tigon fuel line?
So awesome!!.. and i like how yoi did the slow pulls on the new motor.... I just ordered same car.... where do i get the air intake.... and any other upgrades.... you and i think alike.... that intake is ugly stock
That thing is sic
Did you built from scratch or bought a F1Model? Where we can find those beauties?
Nice and wonderful job.
Its an FG F1 model. Available at DDM
Thank you. I saw that it is selling in England. I will double check if they deliver in the USA.
Quite modern compared to my 1971 Jerobee
Why use the idle screw? The throttle servo sets the idle. I've removed all mine on my rc planes. I've a container half full of them!
I am pretty sure that this is more or less the standard version of the FG F1 car. I own the same, but i have upgraded nearly every plastic part into Aluminium. The vertical chassis plates are available in cfk. I also replaced the into cfk. But nevertheless my car is not competitive with the competition f1 car from FG.
Yes, this is the standard version. The competition model has that all steel gear drivetrain for more precision driving.
I’m more impressed by him being in retro 1s and I love FGs lol.
Nice toy.
When we going to see the Primal Rc Raminator Monster Trcuk Build
Very soon 😁 I hope!
Where did you get the different air cleaner or airbox.
DDM
Hi everyone, are the any other 5th scale Formula 1 car out there besides FG so I can compare with? Also the same question for 8th scale, and 10th scale and electric. I'm new to F1 cars and can use some guidance.
1/5 scale I don’t think so. 1/10 electric check Serpent they make a F1 kit.
Show us a video racing with this beautiful car
Coming soon!
How does it handle. I used to race 1/8th years ago using 21 engines
You have to get the rear shocks adjusted and learn your throttle. You can easily spin out if applying too much throttle on curves.
I think between healing people and doing other miracles Jesus would be doing RC! Well maybe? You did a good thing naming your channel i had to subscribe. I do cars planes and Helicopters the most. I had a 1/4 scale boat years ago but im not into boats.
Wow thank you so much. If Jesus did RC he would have fun 😃. Thanks for subscribing brother! I appreciate it.
Got one of them three handed government gas cans I see. 😂. Nice ride.
Wow😮
Where can I find the Metal rod that holds up the pipe Can't find it
I assume you mean the silencer fixing wire that goes on the end. FG10214/01. rc-car-online.de/suche.html?s=10214%2F01&x=0&y=0&lang=en&page=suche&r=
Where and how are these purchased? I'm dying to get one?
DDM in USA www.ddmracing.com/FG-Complete-Cars-Parts-Upgrades/FG-Complete-Cars-Trucks
how much was your kit in uk money?
Very cool ! May I ask where you got the tires from?
The tires are stock. The lettering kit is from Detroit Performance.
@@316RCThanks! Did you have to thread lock any screws and also grease the differential before driving for the first time?
@@RedNinjaGaiden Yes, I always remove any metal to metal screws on all my RCs and check for thread lock. FG did a good job locking all the screws. I did tear down the diff and replaced with my favorite “Fast Eddy” grease although what FG had in there was sufficient.
Thanks for your suggestions! Is your front wing an upgrade and also painted? It looks great.
@@RedNinjaGaiden Yes, it’s an upgrade. Comes clear lexan.
What mixture ratio did you start with?
25:1
Very Nice!! Will you go racing anywhere?
Probably going to take it down to Wagner Park where Crucial RC runs.
Damn beautiful is the word,HAVE TWO FGS CARS 30.5 MARDAR VW BODY AND OLDER 8 SHOCK OR 2 PER CORNER TRUCK I WISH I KNEW HOW TO SEND A PICTURE OF THEM TO YOU. DDM AND GERMANY ONLY PLACES FOR PARTS?? GOD BLESS BROTHER AND FAMILY AL YAKIMA, WA
Wow cool, I’d love to see them! Send to my channel email. Yes DDM and RC Car Online for parts.
Very nice what's is price for those
About $1200 us
What fuel Can I use I'm here in California and I just did my first tank
with 91 octane.
91 is ok for the stock engine if it’s ethanol free
Ok thank you sir.