Talaria Sting R MX4 // New Upgrades // Install + Review
HTML-код
- Опубликовано: 4 сен 2024
- .
Kemimoto Rear Rack: Available soon!
Kemimoto Peg Brace: amzn.to/440iYKY
3 Inch Riser Bars: amzn.to/457taCI
Direct Mount Stem: amzn.to/3qscZRn
Stem Lock: amzn.to/3OvkkHO
Renthal Kevlar Grips: amzn.to/3Yt5qXb
110 Link Chain For 52t: amzn.to/3QBSNY2
Other Parts:
Check out EZDesignsTX.com
Use Code: freerfixedit for a discount at checkout!
SC1 Magic Bike Spray: amzn.to/3qJA9T3
Shinko 241 Tires: amzn.to/3oGJCK2
Bar End Mirror: amzn.to/3Owmh8J
Gritshift Clone Headlight: amzn.to/41SoH4r
Gritshift Blazer Headlight: amzn.to/42SyE3a
Headlight Switch: amzn.to/3pZGkSq
LED Headlight Switch: amzn.to/3Mn2d5H
ODI Number Plate: amzn.to/3IrAY9a
Music Controller: amzn.to/3OlK9vz
Tesla Keychain: amzn.to/45dOerz
Phone Mount Case: amzn.to/3BFldYv
Air Shim for Battery: amzn.to/459g2gK
Shimano Brake Pads: amzn.to/3Mn2NjT
Non O-Ring Chain: amzn.to/3pTouRc
LED Light Kit: amzn.to/3omW8yb
Masterlock U-Lock: amzn.to/3OqW1wd
Kryptonite U-Lock: amzn.to/3Whbdy1
Apple Air Tag: amzn.to/3oim26h
Chest Pack: amzn.to/3Ir9Ern
Red Valve Caps: amzn.to/3IqrxXo
Lucas Gear Oil: amzn.to/41T4Xxt
#talaria #surron #ebike
SUPPORT ODD 1 OUT:
/ dat.boi.odd
/ datboiodd
open.spotify.c...
Need that Kemimoto rear rack! 🙌🏾 glad they finally are releasing one for the MX4!
Coming soon on Amazon!
I did 3" riser bars and was really surprised at how much easier it made finding the balance point for wheelies. I went to a 48T sprocket and im very happy with it. I tried dropping down to a 12t front with the 48t rear which is similar to the 52t rear and stock 13t front, more torque than I really needed and dropped the top speed down to like ~47mph. Ibwent back to the 13t front, Im hitting ~50-51mph with the 48t rear and 2.75" shinko 241s. I was happy to see a new upload from you, sorry to hear you are hitting some speedbumps in life, I hope all is well man!
It really does make wheelies a lot easier! Pretty similar setups between us. Thanks for supporting , I’m all good, just had a little run in with a car last month. Knee has been pretty messed up but I’m back Walkin around and at work today. Feelin bout 80% but we’re gettin there. Thanks again for the support and feedback!
Damn, now I want the 3” bars 😎😎
Yes please to the wheelie tutorial. I'd watch it... actually, that's my plans for this weekend, start learning how to wheelie
Goodluck! keep a lookout for the video next week!
Wheelie tutorial pls. Just had my first reck today on my MX4 and broke my fender 😂. I’m so close to the balance point
I'll do it! keep a lookout for it! hope you're all good! ride safe!
For your front brake lever if it ever bends again don’t use heat just put in a press.
Haven't bought one yet but you given me some good insight an cool ideal on what I would do. Can't wait to get one and start modding and riding and having fun at 62 yrs old X bmx racer.
Love to hear it 🤝🫡
In my opinion, the first few upgrades the Sting R needs include: grips, pegs, axle blocks, headlight switch, brake pads, riser handlebar, and wedge pads for battery rattle.
I bought one a month ago. It’s stock. I assume you own an MX4?
Link to axle blocks?
@@sstrey174gritshift website
Nice list for upgrades. I need to install my chain tension blocks, are they just overall more effective at maintaining chain tightness?
Grips are a pain to slide on 😖
Footpegs are SO much better than stock ones, I went with Warp 9 pegs. Shimano metallic brake pads are great, but my front one started to squeak after a day or two. Amazing stopping power regardless.
I haven’t had any issues with battery rattle, but I think I’ll pick up some additional pads. Where did you order yours from?
My talaria mx3 fastace came with a peg brace and spacers for the battery
Got all the parts on, I got the Warp 9 stem lock for the blue color lol. Only thing is have to drill a hole in the center of front fender to re-mount it or use spacers, but that's not a big deal. Going to try to add the cheap Amazon "bark busters" as well.
@@M.TTT. nice! Hope it turns out well!
Your my favorite talaria guy man, love the videos. Im definitely interested in the luggage rack thingy
I appreciate that man! 🤝 I’ll post the link as soon as it comes out on Amazon
He's alive!!! Been waiting for this vieeo
I’m alive! More videos soon! Thanks for the patience!
Got the same bars but 220mm length after I let my wife ride and she bent the stock ones. Lol. Got all on film, Really happy how the new bars feel. Congrats on 2k subs. Keep at it man.
Oh no 😂 yeah I’m happy with the rise myself. Thanks for the support, really appreciate it!
Great video. Doing alot of research before purchase my sting....this really helped.
Happy to hear that! thanks for the feedback, and I hope you enjoy it and be safe!
Yes to wheelie vid! I got my talaria a few months back and have spent probably 2 hours practicing but I live in AZ and it’s been incredibly hot.
I got you, keep a lookout for it next week!
love your vids man always a great info so helpful to all us talaria owners
really appreciate that! thank you for supporting!
you make my favorite talaria videos, looking foward to future uploads
Awesome to hear that! Thanks!
yessss new freer vid dropped 🙌 super good info as usual
🤙🏽🤙🏽🤙🏽 thanks for tuning in! More videos coming!
Just bought one. Thanks for the advice. ⚡️⚡️⚡️
🫡
I'm glad to see another upload!
I've watched all of your videos multiple times before I finally got my very own Talaria Sting R a few weeks ago! It's so much more powerful than I imagined! I'm so happy with it and your videos helped me a whole bunch to adjust things, especially the suspension. Hands down, you make the best Talaria videos.
I see your bike is a bit scuffed up in places, I'd love to see you do more riding videos!
Also, have you seen the new 18" 21" wheel set on Lunacycle? What do you think about it?
Thanks for watching the videos! Glad to hear they help! Hope youve been enjoying the bike... I did see the new luna wheelset, Im holding out for a 16x19 set for my bike... just depends what you use the bike for and stuff, but chagedcycle works turned their fastest laps on 16-19 in their video doing comparisons. Good video if you havent seen it! And I cant wait to get this thing in some dirt and send it... its been the plan all along, im tired of the garage style how to videos lol, but unfortunately got his by a car last month... all good, just has taken time to get my knee back feeling right... feeling about 85% these days... Thanks for being patient, the riding/sending videos are coming I promise!
That’s a fun trail, I rode my electric longboard through there on vacation once and hit top speed in that straight section! Now that I have a Sting R I would love to come back one day and ride the trail again. Enjoy dude and keep up the great videos 🤙🏼
That’s awesome! Definitely let me know if you bring the bike with you. I can’t wait to ride there again in the fall when it cools off. It’s tick central right now 😅
You only put out quality well explained videos man thanks for the info. 👍🏽
Appreciate the feedback! Thanks for supporting!
Please do the wheelie tutorial men
I got you! 🤝🤙🏽
Killin it with the vids keep it up 🔥
Appreciate you guys! 🤝
Great content every time.
Thank you
Thanks for the support! appreciate it!
He's Back! another great video with good info!
Thanks brother! Appreciate the feedback!
I've heard theres a menu where you can change the gear ratio based on the sprocket size so the speedo reads more accurate :D
I set it to the 1:9 ratio which I saw was for a 50 I think. The next jump up was a lot so I just left it there. I gotta play around with it and the gps to see which one is best 😉
I'd recommend you use a GPS app on your phone to verify the closest ratio on the bike.
@@scourge18a thats what I plan on doing, thanks!
@@freerfixedit Thanks, Following this.
@@freerfixedit Gear Ratio 1:9.5 with wheel setting at 17inch is the closest I can get to GPS accurate with a 52T and 19-2.75inch Shinko 244s with 1-2mph difference give or take. Also, I can confirm that 52T uses less battery for obvious reasons. My work route used to eat up 24%, now only ate up 19% battery.
Good idea to replace the throttle my friends got hit and was working fine untill a little piece of the case plastic caused it to jam full on very scary if the brake sensors are disconnected!!! Stay safe
yeah figured I'd rather be safe than sorry, thanks for watching!
That’s why you don’t disconnect the brake sensor. Is that really the only easy way to wheelie?
Do the wheelie tutorial none ever talk about how the balance point feels and brake control and how to keep it up
I got you!
Hey man, really like ya content, Wheelie tips, yes please.
I've been looking at custom graphics/frame protection. There aren't many quality options but I have narrowed it down to 2 or 3 possibles, I was wondering why you are only running half your sticker kit. It would be a premium price for me to buy and then ship the EZ product to Australia, Is it staying on the bike? Do you think it is worth it?
Cheers from Australia.
Yeah so I was just being lazy and haven’t gotten around to putting the other side on yet. They didn’t peel off or anything. They have been staying really well and are durable! EZ reached out again yesterday and they want to do a giveaway on the channel so stay tuned for that!
Has the rear rack been release yet? I’ve checked your description and on Amazon, doesn’t seem like they’re producing these? Thanks keep up the good work!
I haven’t seen it either. I’ll send them an email and try to figure out the status of it. The one I had I sent to a subscriber or I’d send it to you. Appreciate the support!
I just ordered a Talaria Sting R MX4. It would help me immensely if you could make a wheelie tutorial video. My only Willie experience I'm sad to say is from a kid doing it on a BMX bike pedaling it up. Any tips would be great. With emphasis on how to practice and not wreck your bike.. 😂
Check the channel bro it’s my most recent video 🤙🏽
Sick bike 🤙 got any tips for setting up the pre load and rebound? I lowered mine front and rear all the way. Feels more playful now but easier to bottom out
I’ve got a full suspension video, check it out 🤙🏽
Wheelie tutorial vid please bro!
Got you!
hey bro, i have had my bike for over a month now, it's been tons of fun but its also been a serious pain, both fork air pressure release screws on the top snapped when tightening it, didnt try to over tighten or anything but the heads of the screws just snapped, cant find the oem replacment for the life of me and no hardware screw works, i found some that kind of work in the meantime but thats not even my issue anymore, I also had a screw that broke when changing my oil, one of them snapped while tightening it because it bent while putting it in because the locktite on it was very hard to screw in, honestly my fault this time but still thats not a problem didnt even need it, the big problem is i bought a fork pump to pump up my forks, everything was going fine... i removed the valve stem from the bottom of the forks to get the valve stem cover off so i can pump up my forks, i was screwing the valve stem back in and it was getting tight and i just made sure to tighen it good so it doesnt leak or anything and the thread to it just snapped off and its in the bottom of my fork, i tried to use a flathead screwdriver to get it out and it pushed up the thing that its attached too, it ended up moving up and some oil leaked everywhere i was able to get it back down because that piece has the thread for the big 19mm screw to screw in, it leaked a decent ammount of oil but not like a cup of oil or anything, im not really sure what to do, do i need new forks?, do they need to be rebuilt because they leaked oil or what, im thinking i might be able to get the thread of with the help of my father but yeah, kinda annoyed about all of this havnt been able to ride my bike for over a week and really bummed, theres a talaria store near where i live so maybe ill take it there and maybe they can cover it through warranty or something. hopefully you can picture what ive rambled about and sorry making you read all of this but you're pretty smart when it comes to these bikes so i want to know what you have to say. lol
damn no response? np bro didnt expect you to read all anyway lol
I did read it all bro, just trying to get an idea of what’s going on. Can you send pics to my email and try to help me understand what’s going on? Sounds like you need to ease up on the uga bugas when tightening bolts 😂 Hopefully the shop can get you back riding, if not just email me some pics or a video and I’ll try to help the best I can 🤙🏽
If you lost oil, ideally you’d want to add it back. The fork will perform different with different oil levels. I’m sorry all this is happening. I know it can be a headache. If you’re talking about the small bleeder screws on the top of the forks, make sure if you replace them that there is an o ring seal on them to make it air tight
@@freerfixedit yes definitely need to ease up on the uga bugas 🤣
@@freerfixedit yeah the small bleeder screws, it’s just it’s impossible to get the oem ones that the head of the screw sits flush in the hole and seal
Next time you should try the Renthal Tapered grips. Best grips EVER!!
I’ll def check em out, thanks!
@@freerfixedit they are basically the same grips but more comfortable.
love it thank you
I need your wheelie tips
I've been trying to get it but its hard
I got you! It gets easier I promise!
You should make a wheelie video bro
It’s on the channel! Check it out bro!
Thanks for the video, What tank bag is that?
amzn.to/3V7yiE8 7:43 in this video... ruclips.net/video/JXRoynpodKE/видео.htmlfeature=shared
the funn handlebar mount has clearance issues from the centertube being wider on the bottom even if you have stock headlight. I'd warn people to be extra careful as they can crossthread and strip if they try to force it. I appreciate your indepth upgrade vids but i think the funn mount is kinda crap if it requires shimming because of interference with center tube.
It doesn’t interfere with the center tube, I shimmed it up to clear my headlight. Thanks for the feedback 🫡
@@freerfixedit so the stock stem spacer that is on the bottom of your center steering stem in your video is much wider than the stem spacers that come with the stem lock. It interferes with the direct mount both funn and one other type I’ve tried. For now I’ve swapped the order and moved the stock spacer up to the top and the spacers that come with the kit at the bottom since the od is smaller and has clearance for the direct mount. This works but looks kinda stupid but hard to notice unless you know it’s there.
I think 52T is a 108 link chain, used a 110 on my 54T
Great video! I’m going get the riser bar, but do you think the 720mm would be better or get the 780mm?
Thanks! The 780 is definitely pretty wide. Just up to you for what feels comfortable…
why are you tapping on the back break when you're up in the wheelie G spot? What does that do... I have no problems doing long wheelies, but i'd like to be able to wheelie at slower speeds like you are here.... Tips? - Cheers!
I typically just use the rear brake when I get too far back past the balance point. It’s easier to not use back brake as much doing a little faster wheelies, when you slow them way down you gotta be on top of the brake and throttle cause you don’t really have the benefit of momentum helping you. Some other tips I’ve been told are to look up at the horizon and not down at your front wheel/fender. Kind of like how balancing on one foot is easier if you look ahead rather than down at your feet. Hope this helps and let me know if you have any other questions 🤙🏽
Did you go into the display settings and change the gear ratio??
Luna cycles has a breakdown for each ratio for each size sprocket.
It will make a difference
You hold down the top button
Yo im a new biker and i was hitting some jumps and i broke sume tube thing holding the stand
Tube thing holding the stand? Can you describe it more?
Why do you feel the need to get rid of that warp 9 logo? What good is that doing?
I made a meme about how their parts are over priced, owners got butthurt and started talkin crap in the comments. Just don’t want anything to do with them and will never represent that company in any way
would like to see wheelie tutorial!
Shooting for Friday weather permitting ☔️🤞🏽
good video thanks
Appreciate it! 🤝
what number plate is that??
ODI downhill plate amzn.to/3QvW0Z3
Also what’s the lofi hip hop song at beginning? Good ass riding music
theyre beats my buddy makes, his spotify and stuff is at the bottom of the video description!
Did you update your gear ratio on your speedo settings? That's probably why your speed on your display is wrong.
Yeah I adjusted it to the nearest ratio for sprocket size. They don’t have one exactly made for a 52 so I’ve heard changing to 17” wheels in the display will help. I just have to play around with it with a gps Speedo soon
wheelie tutorial pls bro
Got you!
How have the bars held up? And all the stock components, grips, etc. fit on the new bar, right? I might get new but jw.
@@M.TTT. they’ve held up surprisingly well. Have hit some pretty big jumps with them and they’ve been solid.
@@M.TTT. and yeah everything swaps over fine
I got my mx4 used, definitely need to check my sprocket size, super torquey and top speed up a steep hill was like 44.
@@freerfixedit ah sick, thanks for the reply man!
@@M.TTT. I have a 52t on the rear and my top speed is about 46 now
Just installed my stem lock. Had the bike on a stand with the front wheel in the air. Would that make a difference? I saw some videos where people would loosen the triple clamp first befor installed so I did that as well.
I don’t think it’ll make a difference. If you over tightened it, the steering will be stiff and you may even feel the bearings when you turn. If you under tightened it, there will be a little slop/play in the bars back and forth. Not sure what loosening the triple clamps would do for installing the stem lock. Seems unnecessary, but hope you got it all sorted out 🤙🏽
I don’t think it’ll make a difference. If you over tightened it, the steering will be stiff and you may even feel the bearings when you turn. If you under tightened it, there will be a little slop/play in the bars back and forth. Not sure what loosening the triple clamps would do for installing the stem lock. Seems unnecessary, but hope you got it all sorted out 🤙🏽
Do headlights switches just give you better battery range? Or for running from the pigs
Hello, can you please give me an address where I can order the luggage rack for the Talaria? Many thanks Herbert
It’s not available yet… coming soon!
cool
🫡
He doesn't want the vinyl. Lol
If he doesn’t get up with me within a week or 2 you got em!
send me an email,, zylor still hasnt gotten back to me with his contact info, if he doesnt reply to my email by monday, ill ship them to you!
Nice!
Appreciate it! 🤝
Hello, would the steam lock fit with everything else stock?
Does removing the brake sensor completely like you did cause any errors, also did you install a new bolt to cover the hole or just leave it open?
No it doesn’t cause any errors. I just left the holes open, cause I don’t plan on ever using the brake sensors again
Nice.
Did ya ever run a new top speed with the 52 sprocket to see how much mph ya lost on the top end? Would you say worth it?
I get about 46-47 mph top speed now. Lots more torque down low too. Fun for wheelies
@@freerfixedit awesome thanks, was debating between the 48 and 52 and might split the difference with a 50. Prob would need a 109link chain to make it work.
@@vinceroble yeah I had to get a new chain to fit the 52
Hey, let me know when that baggage rack drops so i can use your affiliate link. The least i can do for how much help your videos have been.
Hey I really appreciate that! Send me an email, I'm not gonna use it and wouldnt mind sending it to you!
@@freerfixedit You are the MAN!! I hope your channel blows up, you’re content is top notch and you’re clearly a great guy. Take care
@@stephenhenry8704 thanks brother! I truly appreciate it!
Will the luggage rack hold a 24pk of beer
Definitely 🤣
How are you liking those riser bars so far? Was the length of the bars good did you cut them shorter at all?
I like them. The 780mm width is definitely wider than stock, but I’ve gotten used to it and haven’t cut them
@@freerfixedit how’s the angle? I notice the stock mx4 bars is pretty straight, does these angle a little more in?
@@freerfixedit also do you have any discount/promo codes for these bars on Amazon?
@@rog3rbee915 the angle is good, only thing I noticed between these and the stock bars is the new bars are a bit flatter, with less upsweep... but for 40 bucks theyre fine for me
What kind of phone holster is on your bike?
If you’re talking about the phone case it’s a jogging armband for phones. Pretty sure it’s linked in the description!
What throttle did you change to?
The replacement throttle from Lunacycle. It’s the same thing just has a metal housing now instead of plastic
@@freerfixedit oh fuck I’m about to grab one. I wonder if Luna is the only seller with it. I’ll have to check the part # for it
Is the kemiMoto peg brace a lot sturdier or same material as stock?
It’s aluminum so I’d say it’s more sturdy. Stock seems like pot metal/ chinesium
@@freerfixedit thanks
@@Shmack_ no prob. I think you can use code freerfixedit for another 5% off on Amazon too
Which Kemimoto rack on Amazon will fit the Talaria?
It will be available soon!
What pegs you running?
they're some crf pegs I got off amazon, I had to grind them down and modify them a bunch to fit... don't recommend
If you like to ride on one wheel, buy yourself a unicycle! 🤣
Or just an onewheel (the electric board)
I'm 6 ft how tall 🤔🙌🏾
? I’m 6ft ~200lbs
I also want one. Someone buy me one 😊
Not respecting fellow bikers by wheeling in the other lane is a great way to get these banned even more. Have some common sense
@@Angel_72v go suck an egg