How to Replace Knock Sensors 2011-2020 Dodge Grand Caravan 3.6L

Buy Now!
New Engine Knock Sensor from 1AAuto.com 1aau.to/ib/DEEK...
This video shows you how to install new knock sensors from TRQ on your 2008-2020 Dodge Grand Caravan (3.6L). A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.
This repair was done on a 2014 Dodge Grand Caravan SE 3.6L Mini Passenger Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
2008 Dodge Grand Caravan
2009 Dodge Grand Caravan
2010 Dodge Grand Caravan
2011 Dodge Grand Caravan
2012 Dodge Grand Caravan
2013 Dodge Grand Caravan
2014 Dodge Grand Caravan
2015 Dodge Grand Caravan
2016 Dodge Grand Caravan
2017 Dodge Grand Caravan
2018 Dodge Grand Caravan
2019 Dodge Grand Caravan
2020 Dodge Grand Caravan
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/o5k/1AX...
• 10mm Wrench 1aau.to/o9o/1AX...
• 10mm Socket 1aau.to/obzh/1A...
• 13mm Socket 1aau.to/obWb/1A...
• 19mm Socket 1aau.to/oayz/1A...
• 27mm socket 1aau.to/oao/1AA...
• 8mm Socket 1aau.to/obzh/1A...
• Trim Tool Set 1aau.to/oarC/1A...
• Vacuum
• Needle nose pliers 1aau.to/oHB/1AX...
• Needle nose pliers 1aau.to/oHB/1AX...
• E8 Inverted Torx Socket
• T25 Torx Driver
• T30 Bit
• T40 Bit
• Ratchet 1aau.to/obY6/1A...
• Socket Extensions 1aau.to/obWb/1A...
• Swivel
• Torque Wrench 1aau.to/oa3K/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oKY/1AX...
• Gloves 1aau.to/oaPa/1A...
• Safety Glasses
• Drain Pan
• Pick 1aau.to/oYg/1AX...
• Razor Blade / Gasket Scraper
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@coolstuffsupreme]

Thank you for this helpful video, your explanation and step-by-step guidance on replacing the knock sensors were very clear and easy to follow. RUclips recommended your video when I was watching the Explore Your Dream Life channel. I have liked this video and you've got yourself a new subscriber!

[@nrjank]

A point of advice from someone who found out the hard way, on my 2019 Dodge Grand Caravan I found out that around then they changed the style of knock sensors. The ones shown here have kind of a boxy connector, the 2019 and moving forward have a more rounded one. If you go to somewhere like RockAuto or NAPA Auto parts, and put in the year make and model, both will show up. Double check your connector before you get the wrong one. Apparently the oil pressure sensor on that harness also changed

[@kjcslim]

Fantastic! Getting ready to replace oil cooler so will change knock sensors as well. Thanks!

[@Tumusica311]

Its good to point out that when you replace the oil cooler,its a good time to change those sensors.

[@arturomacarthur799]

Excelente video. Muchas gracias