Your video really helped I wasn't trying to take the tires off. I did have to put the front on jack stands to have the tires turn a little more. Also if anyone is unlucky like me and those 2 bolts are tight, you can use a hex key as a handle being that there's not much room
My brother, you did a great job. I need to actually pull the whole headlight assembly out because mine has water inside and I want to replace it with a new one. Does it look like the headlight comes out easy?
Hey so if I need to replace the top part the radiator support cover (the piece you took the 12 push pins out of) would I need to take the bumper off to replace it? Or could I replace it with it on the car?
That piece is attached to the bumper and it would be a lot easier to remove the bumper cover. You would have more visibility and range of motion. You could probably manage by removing half the bumper, but it would be difficult to reach in and see what you need to do. Thanks for watching!
If I wanted to replace a headlight ballast, I would need to follow these steps to remove the bumper correct? I don't think I can access the ballast otherwise?
Hello! We recommend reusing any screws and hardware that you can. Just replace any screws or broken pieces. We can help you with that if you talk to us in the chat. Take care and visit us at bit.ly/15-21_Charger_Bumper
@@ReveMoto charger RT front bumper to charger srt front bumper ikon motor sports. I managed to get it on but I had to leave out one of the pieces that might keep it from having a gap between the hood and the bumper.
That happens to all of us ahha. Trust me you keep on work with cars its gonna happen again. Thank you for your service also!! If you need any parts for your car go to www.ReveMoto.com
Thank you for watching!
Purchase your new bumper here: bit.ly/15-21_Charger_Bumper
Wow somebody actually step by step removed all the bolts so I know what points to hit. May you be praised bro
We're glad we can help and thank you for watching!
Thanks for this finally a detailed video on this 🙌🏿🙌🏿🙌🏿
Your video really helped I wasn't trying to take the tires off. I did have to put the front on jack stands to have the tires turn a little more. Also if anyone is unlucky like me and those 2 bolts are tight, you can use a hex key as a handle being that there's not much room
Appreciate it! Glad the video helped. Hex key is smart - thanks for the tip!
Thanks for the video. Have to repair the horns.
You bet, we're glad we could be of help. Thank you for watching!
Made it simple and easy to understand. Thanks
You're welcome! If you need a replacement Charger bumper painted to match, get it at revemoto.com
Thank you 🙏🏻
Glad it helped! If you decide you want to replace the bumper with a painted Charger bumper, check us out bit.ly/15-21_Charger_Bumper
Thank you so much for these videos bro
You are very 🙏. If you have any questions let me know. If you need parts for your car go to www.ReveMoto.com
Jus removed mine! Awaiting my new bumper to come in. Thank you!
Did you buy it at www.ReveMoto.com?
@@ReveMoto I didn’t place an order yet! Short on funds right now but hopefully soon I can order one!
@@tyk248 Looking forward to it!
@@ReveMoto do you guys ship to Hawaii??
@@tyk248 We sure do!
Very Appreciated for the Video, Thank You!
Glad it was helpful!
Thank you!
You're welcome! Please subscribe, it helps us make new content.
4:15 an air ratchet saved me so much time on this
Nice! Great tip for anyone who has an air ratchet for sure. Thanks for watching & following along with us!
I use side cuts to get the plastic rivets off - better than the screwdriver, not as good as the tool you have.
If it works, it works! We've done the same thing in the past. Thank you for watching!
My brother, you did a great job. I need to actually pull the whole headlight assembly out because mine has water inside and I want to replace it with a new one. Does it look like the headlight comes out easy?
Yeah it does once the bumper is off
Hey so if I need to replace the top part the radiator support cover (the piece you took the 12 push pins out of) would I need to take the bumper off to replace it? Or could I replace it with it on the car?
That piece is attached to the bumper and it would be a lot easier to remove the bumper cover. You would have more visibility and range of motion. You could probably manage by removing half the bumper, but it would be difficult to reach in and see what you need to do. Thanks for watching!
If I wanted to replace a headlight ballast, I would need to follow these steps to remove the bumper correct? I don't think I can access the ballast otherwise?
Yes follow the steps to taking off the bumper and getting to the headlight would be much easier. Go to www.ReveMoto.com for all your car parts needs.
Appreciate the excellent video - thank you 👋
Glad it was helpful!
Whts a price to have that same bumper takin off on a 2018 charger I want to swap mines
Hello! That depends on the shop. The bumper does have a lot of steps but most shops will charge $50-90 an hour for probably 2-3 hours of labor.
How did you take the inside screw off you cut that part
Which screw?
❤️❤️❤️
Thank you so much! So glad this video helped out. If you need parts for your vehicle go to www.ReveMoto.com
do I need to buy screws and what not if I do a replacement w the srt fascia
Hello! We recommend reusing any screws and hardware that you can. Just replace any screws or broken pieces. We can help you with that if you talk to us in the chat. Take care and visit us at bit.ly/15-21_Charger_Bumper
I have a 2015 charger sxt, would I be able to fit gt front bumper in mine?
All charger parts are compatible, unless your wide body lol
How much would a body shop charge to swap my old damaged bumper and put my new one on
I see it go from $300-$500.
Where are these 10mm bolts inside the fender
Right next to the headlight right behind the fender.
What are the bolts size ?
Some are 7mm and 10mm.
Anybody’s bumper conversion not fit ?
What conversion are you trying to do?
@@ReveMoto charger RT front bumper to charger srt front bumper ikon motor sports. I managed to get it on but I had to leave out one of the pieces that might keep it from having a gap between the hood and the bumper.
Didn’t work
Sorry, not sure what you mean by this? Were you not able to remove your Charger front bumper?
All I did was drop a bolt, fuck me....
That happens to all of us ahha. Trust me you keep on work with cars its gonna happen again. Thank you for your service also!! If you need any parts for your car go to www.ReveMoto.com
we might have to bleed out your brakes
For what? That’s crazy what car do you have to do this just to remove the bumper
Thank you!