MT03 - R6 Throttle Tube Install
HTML-код
- Опубликовано: 10 сен 2024
- The stock Yamaha MT03 and R3 require a ridiculous amount of rotation to get to full throttle. It is difficult to open the throttle wide without repositioning your hand on the grip. The long stock throttle throw can make it more difficult to accelerate quickly which is already a challenge on a bike with smaller engine capacity.
Switching the throttle tube for the tube from a Yamaha R6 reduces the rotation to full throttle by approximately 20%, a noticeable improvement. The R6 throttle tube mod makes the MT03 and R3 more fun to ride and more responsive during acceleration. Force required to open the throttle increases by a small amount due to the larger R6 tube diameter, but is well worth the improvement in response.
Use my Amazon Affiliate link to purchase the correct throttle tube: amzn.to/42PxOod
Amazon Affiliate link for the correct 3M Gloss Lucid Yellow Vinyl Wrap I used is amzn.to/40yvu3y.
Affiliate Links:
Maxima Chain Cleaner: amzn.to/3SZVq5h
Chain Brush: amzn.to/3Ik0E7h
Maxima Chain Lube: amzn.to/4bTGkHr
Rear Paddock Stand: amzn.to/3SXM36l
Blue Shop Towels: amzn.to/3uJRvBO
Neck Gaiter: amzn.to/3x7SOuN
Dude you're the only frickin guy who even mentioned the barrel adjuster and actually showed where it is! Damn these fools had me trying not to tighten the case up so it would slip. Has nothing to do with the removal of the freeplay due to the larger diameter.
You are the man.
Glad to help! I hadn't seen anyone mention that adjustment either, so I figured it was important to include.
Even the dickheads who sold me my shit would not even talk about it. In the manual it just says take it into the dealership. Eff that bro. You rock.
And as always
I was entertained
I did not cut the washer, left it inside to keep debris out and no problem. Had to take out more than half the travel any more I think you'd have to adjust it at the throttle body.
Don't mean to blow you up but I'm pretty sure even yamaha doesn't want you foolin around cause they marked it with a green dot and threadlocker.
@@1683clifton Interesting to hear the washer can stay. Too late for mine!
Are you considering doing a clutch/brake lever mod? The clutch can be hard to hold in while still being able to reach the indicator for my hands. Would be nice to know how to replace those with something more reachable.
Should I be concerned if I had to loosen the nut all the way to allow me to twist the throttle? Seems ok but I don’t know
How much of a difference have you noticed? Do you still need to adjust hand while holding throttle on highway?
The best indication that it is working great is that I don't even think about it anymore. It is definitely a good mod and makes the throttle feel much more normal.
Thank you! Couldn't figure out why the throttle was sticking 🥴
You're welcome! Yup, that little detail is important at the end.
when you put the throttle tube on the bar did the thorttle tube just moving around I mean that moving a little bit not 100% the exact size of the oem one ?
Tube fits great like it was designed for the oem bar.
Just did this mod/upgrade on my 2021. Cant wait to try it out! Stock throttle travel sucked
It was definitely a noticeable improvement.
@@mt03experience I don't see any difference on this video lookind at that paper before and after still same for both
lol yeah long screws lol, thanks great upgrade
Thanks brother. I need to clean and lube mine. Easy peasy.
i have. a 2022 model i’ve heard i might have to make cable adjustments what year model is yours ?
i see you made adjustments looks easy, new to bikes just tryna figure out the big picture before i put it on
Mine is a 2021. The process for yours should be identical. Loosen the cable a bit like I show at the end.
I have mt25 (same bike , with smaller engine), when i adjust the cable to make the rotation smaller, it becomes heavier to rotate.
Compare to the original tube, does this r6 tube makes it heavier when you rotate the tube or just the same?
The larger diameter of the R6 throttle tube theoretically makes it a little bit heavier but I did not notice a difference. If it feels a lot heavier, disassemble and make sure your cables are not binding somehow.
@@mt03experience just for curiosity, does your bike's frame number start with letter MH...?
Yes, my VIN number starts with MH and location of manufacture is listed as Indonesia.
@@mt03experience so that makes sense, yamaha-Indonesia plant is also the main source for R3/mt03, while still producing R25/MT25.