modifier tuning seemed to be worth it lmfao good stuff love the editing in this one ps: Im a massive fan of some of these methods i hadn't really considered the trade off for flex when adding foam
from what im seeing the only downside is that it only supports plate mount stabs, how much did the kit cost you? because im seeing prices all over the place for this
Год назад+1
It also support pcb mount and the price around 96$
Maybe you should consider using a deskpad, the keyboard was great but its sound is just too hollow, most of it was the sound of the table hitting the board.
eww they put the screws under the double sided taped on rubber feet? not enthusiast friendly whats so ever...dont give this brand your money unless that change that design they havent earned it just yet
@@wei4rskeyboard honestly for the money it sounds incredible the build you put into this, but the future proofing of this is almost none, as a keyboard designer, you have to think of this stuff. it comes from experience, you can make any board you want even a 20 dollar board sound good, with experience comes things like not having the essential screws for the board youll be taking apart to build and change ect under the rubber feet that give you insolation because after maybe 2 times the feet will rip off, youll have no replacements and will then have to find replacements somewhere. and then also obvi the quality of the material used here is super low, but hey its budget.
@@auschris9296 the creator of this keyboard mentioned in one of his video you can easily get some double sided tape and make the feet reusable, not really a deal breaking issue. They have included extra pairs of feets too.
modifier tuning seemed to be worth it lmfao good stuff love the editing in this one
ps: Im a massive fan of some of these methods i hadn't really considered the trade off for flex when adding foam
This channel is so great. So much relaxing and elegant ❤
Can’t wait to watch more like this!
having a daughter board really adds to how flexible it is. Awesome for the price
this is very nice t;ut and review for this keyboard. really informative and quick in the same time. no bs or ads. keep it up!
Do the keycaps have high quality? (Printing, thickness, color, feels in your hand)
Not really, but I’ll say it’s good enough to use. No interference btw(south facing pcb)
where can i buy this kit?
can you turn off the green led indicator when it is connected via type C?
It will automatically turnoff once its fully charged. I also have this keyboard.
@@christianallenambi7557 im ordering thể round 2 is there anything problem with it so far?
What do you use to tune stabs those metal things? I would love to buy some for when I tune my own stabs.
Just 2 simple tube and is not necessary at all. You can use 2 pens instead
hi newbie here, why'd u put tape on the bottom frame when u were putting together the frames? what is pinning?
just trying to make some space between the frames so there won't be sound of metal crashing
he meant pinging lol. its to avoid a metallic sound
@@sensuku my English sucks. thanks for correction
How much is the weight fully built?
about 1.3kg. pretty heavy.
Is that keycaps kbdfans white doubleshot pbts?
These keycaps are included in the R1 version.
This or the Keychron Q2 knob (in my country q2 is on sale and around the same price as this) thanks!
Never try Q2, but the spec looks good
請問在寫code時不會常用到home或end嗎?(全選整行)
這樣在使用65%鍵盤時 該如何解決
有VIA可以設置快捷鍵(ex. Fn+PgUp/PgDn)
了解 我現在平常是用一般的100%鍵盤
但覺得右手要一直移動(上下左右home、end、Del) 很不舒服
所以才考慮想要買一個小一點的
最近開始研究
以主播你的角度來說
手偏小的人會比較推薦65或75還是60?
(右手食指貼在H上小拇指只能到enter左段)
@@ylhsieh8600 60%/65%/75%差在方向鍵還有最上面的Fn列,打字區都一樣大,我會建議65%以上的,比較好入門(有方向鍵)
那想問一下 目前有哪幾支比較推薦的65%嗎
預算只有1000-2000會不會太少 XD...
或者再高些但CP值很不錯的 我也可以接受
from what im seeing the only downside is that it only supports plate mount stabs, how much did the kit cost you? because im seeing prices all over the place for this
It also support pcb mount and the price around 96$
What is the thickness of keycaps?
not sure about that, but I personally don't think it's good enough
wait.. whats the pinning thing for
Sorry for my poor English…
I mean the noise caused by the case(some calls it pinging?)
@@wei4rskeyboard oooh okok thank you
The v65 R2 is better !?
It's not released yet
maybe I will compare them after I buy one lol
Does this board support screw-in stabs?
yes!
Thank you so much for the reply. You just earned my sub ❤
how do i get my hands on one?
it's sold out now, but the rumor says that will be a R2 version in Dec.
想請問你case那段 貼那個藍藍的是什麼?單純的膠帶嗎
我是用3M的紙膠帶 不過應該一般的紙膠帶都有效!
Maybe you should consider using a deskpad, the keyboard was great but its sound is just too hollow, most of it was the sound of the table hitting the board.
thanks a lot! I think your suggestion is absolutely correct, maybe I was too focusing on recording the video and ignored it. I'll try it later!
bro the board sits on the table, the table doesn't hit it
@@TyrellW no hes right desk mats help go do some research
@@terrypark8540 lmao
@@wei4rskeyboard v nvn. ;,!,,:?
no need foam case? :o
It depends. if u want it sounds better, than case foam is necessary(meanwhile, reduce the flexibility)
i need a 75 version of this
similar design or what?
@@12.nguyenmanhhung45 yea im hoping they release a 75 layout version of this. i need my f keys lol
they do have an r2 coming soon
It's like... identical to cidoo v65
My bad. It’s actually a joint product produced by finalkey and cidoo.
@@wei4rskeyboard wow, i didnt know that. Thank you for your content 😊
My guy. 1 layer of tape? You mad? 😝
I actually did 3 after but I didn't record it lol
1 layer is definitely not enough
can u do tape mod with foam below?
@@akkira08 of course!
Cidoo v65 better than this
It's a joint product of these two brands bro
@@wei4rskeyboard yeah, but Cidoo sounds much better
eww they put the screws under the double sided taped on rubber feet? not enthusiast friendly whats so ever...dont give this brand your money unless that change that design they havent earned it just yet
I agree. The design is not user friendly at all...
but the prize is so competitive and I just can't control myself LMAO
@@wei4rskeyboard honestly for the money it sounds incredible the build you put into this, but the future proofing of this is almost none, as a keyboard designer, you have to think of this stuff. it comes from experience, you can make any board you want even a 20 dollar board sound good, with experience comes things like not having the essential screws for the board youll be taking apart to build and change ect under the rubber feet that give you insolation because after maybe 2 times the feet will rip off, youll have no replacements and will then have to find replacements somewhere. and then also obvi the quality of the material used here is super low, but hey its budget.
@@auschris9296 the creator of this keyboard mentioned in one of his video you can easily get some double sided tape and make the feet reusable, not really a deal breaking issue. They have included extra pairs of feets too.