CorkSport Axleback Exhaust for 4th-Gen Mazda3 • Installation & Impressions
HTML-код
- Опубликовано: 2 авг 2024
- Installing the CorkSport Axleback onto my 2019 Mazda3 and testing it out.
Where to buy the exhast:
corksport.com/2019-mazda-3-an...
CorkSport did not provide this unit, otherwise compensate me, or receive copy approval for this video; all reviews expressed in this video are expressly my own.
Contents of this video
00:00 - Introduction
01:40 - Installation: Removing Stock Exhaust
03:40 - Installation: Installing the CorkSport Exhaust
06:05 - Initial Impressions
10:06 - Cold Start Comparison
11:09 - Accelerating & Coasting
11:48 - Final Thoughts 
Авто/Мото
The Soundtrack to this Video got me GrOOOvin
Great video. I definitely like how you did it. This exhaust sound better than I expected and doesn’t drone as bad. I commute 120 miles a day, this doesn’t seem like it will annoy me crusing at 75 mph. My biggest fear was drone around 2k rpms.
I ordered mine in the morning they released it. The sound balance is great, which won’t sound loud when you drive normally, but will sound great and loud when you are doing some aggressive driving, which is a good thing. Also, the weight of the exhaust also makes the car a bit lighter, which is another benefit of having this. Having it with their intake would be a great combination. I recommend this to people who wants some aggressive sound, but not too over when doing daily driving.
Why change the intake ?
@@youdavid8484 Have you heard the car with a CAI? Sounds like angels singing.
@@strength.culture where i can watch a video of the car with a CAI?
@@alexvinci432 it's not a true cold air intake and actually hurts low end performance. will also turn on your check engine light on earlier models
The only video that does the sound justice
What a well made video. Everything I needed to make the call.
I have a borla axel back on my 2018. Friend convinced me to remove the resonator and it made it much louder. Sounds amazing. I'd say it only "drones" at 75+ 'mph. And cold start is pretty loud lol
Awesome video, great resource. Just bought a Racing Beat exhaust for my 3, will use this to install it.
Fantastic video, great and detailed install steps too!
The quality of this video is tremendous. The amount of effort and thought put in dwarfs that of a channel triple its size... well done friend!
Thanks! It takes a lot of time so I can't always make them like this
Came from reddit, really well put together video
nice work!
Nice video and your ride sounds great.
Excellent video and very informative. Seems a bit harsh of a sound for me though. Interesting that the right exhaust essentially isn't muffled at all (so your main sound will come out there) and there is a muffler for the left outlet. Does the muffler for the left bounce around and hit the heat shield at all? It looked like the clearance was pretty tight.
Thank you for this awesome video!
Installed mine on my hatchback to this video goodlooks bro
Excellent video man, holy crap. Thank you so much
Great video and good explaining
very well made video
I love hearing mine❤
very nice editing !
Well made video!
Nice job on this brother
so it has a muffled side and a straight pipe side...curious how the two balance each other. Your noise will depend on engine load. Going up inclines with cruise control on will change the tone as the engine has to work harder. What would be neat would be to have a valve to direct flow either to the muffler, or to the straight pipe, depending on your mood at the time...Definitely looked well put together...
Great video and Awsome content. Subscribed, liked and hit the bell icon. ;) Dude I am glad I found you. If I am not wrong you had started a Facebook page for Mazda3 grey sedans. I am part of it. I recognized you when I saw your license plate. Glad to connect. I have a 2020 Mazda3 grey sedan as well. I would like to take your advice on a couple things. Thanks again for these Awsome tutorials.
Thank you for this. This is next on the list for my 2019 GS hatchback, but I've no idea what I'm doing. Watching made me way less stressed. Great work.
Edit; The Axleback has arrived! Watching this again so I know 100% what to do! 😀😀
Impressive way you document Your video I really like it
Now, the sound is not quite Impressive but I like it aswell
Good job
I think some of the low-end growl got lost after uploading to RUclips unfortunately. It does sound pretty good in person I think. Not amazing but pretty good.
Can't wait to install it on my Mazda 3 . Mine is a 6 speed manual.
Same here got a 2017
awesome. any chance you have some footage of the exhaust mounted?
Would this custom exhaust fit for a mazda3 Gt 2021? With the sky active engine.
When will you guys release the 80mm cat for the gen 4?
Yup I'm sold getting one for sure as soon as my warranty drops off, just bought a 2019 used with 24,800 km on her so she pretty fresh still. Great drive though love that car.
In no way will a cat back or axle back void any Warranty
Thinking of getting this for my 2017 sedan
Whens the catback coming for the 19 hatch?
where do i can buy one of that in usa ???
is this loud enough to be ilegal in california do you think?
Great video!
Would you mind doing a video on how you record the exhaust audio externally? I know you mentioned it in this video, but was curious to see how it really is setup.
I think the external audio on moving shots was a lavalier with wind sock clipped to license plate frame
Quel est le prix de cet équipement pour Mazda 3 e.skyactiv G ??
felt like I needed to put on my glasses to watch this video with the sunlight coming in your windows XD
Sounds good. I'm waiting for the 80mm because I've got the 2.5T and want to gain some flow to help the JB4 tuner I also purchased. The quality vs price of a Borla, etc can't be beat.
How do you like the jb4?
@@bobbygreene5160 It's a band-aid. Effective, but not a real tuning solution. It's a 4psi bump on 93 octane, and it delivers some readily noticeable AWHP and TQ, particularly in the lower RPMs. We're going to need something more advanced to take advantage of the octane in E30 / optimal peak timing to wring out the extra ~30hp/~40tq.
Im waiting for the 80” any news?
@@cynthiahernandez4242 it’s out, just ordered mine :)
@@Whatzitmattermost of the gains are above 4k
Great video I like the sound but I think I will go with the magma flown system.
Did you end up installing the magna flow exhaust? How does it sound compared to this one?
You should do a resonator delete this way you could hear like the little pops and stuff
Here from a Reddit post. Thank you for the guide. Any clue as to whether or not this would void the warranty?
Depends on your country but in general it should not void your powertrain warranty. If you live in the US, the Magnuson-Moss Warranty Act provides protection against manufacturers refusing repairs unless they can prove beyond a reasonable doubt that your modification was the cause of the issue.
Not bad, currently got a resonator delete on my 3 BP and plans to get a straight cat-back with muffler delete next week.
Are these legal in California? Is it below the sound limit? Please someone has to know….. I want this shit lmao
Will this fit a mazda 3 2.5L 2017 hatchback?
No, this is for 2019+
What size ratchet and torque wrench did you use in this video? And what size do you recommend for basic/intermediate car projects, 1/4 3/8 or 1/2
Id appreciate the help
Thank you
Also are deep sockets really needed, can i get away with it with regular sockets
I think I was using my 1/2" but if I could only have one I'd probably but a 3/8". I think if you use a spanner wrench on the side where the bolt sticks out you can get away with a normal depth socket
will this fit on 2022 mazda 3 sedan?
yes, 2019+
just curious why you chose Corksport over say Borla, Magnaflow or OBX?
corksport has much better experience with mazdas, they basically specialize in them unlike borla and the others. i have a 3 and went with corksport, it sounds great but doesn't sound ricey. with borla, it's a bit extreme
@@ronnypooky what about afe power takeda?
love it when ppl do DIY stuff but 499.99 is a bit too pricey for me especially when there's no performance gains.
I know this comment is old, but corksport full catback and a short ram intake gain +12whp on their dyno. The intake is very minimal gain, a K&N would probably get you almost the same since it's not sucking in hot air like a short ram. The stock exhaust is very restricted for emissions. You can feel the exhaust vibrate even if it's warmed. Seems like it's struggling to push the exhaust gases at low RPM because the diameter is so small. Plus you get a nice sound, it's unique from all the other NA inline 4 due to its big bore long stroke and high compression.
If you need a friend in StL, I got you. Subbed.
Now imagine this paired with an intake 😍
So did you notice any drone?
No it's nice and quiet when cruising
Does this work with the 2020 2.5l sedan?
Yes
@@halomakes thank you
You have a speed6??
I did for about half a year. Ended up selling it to get money towards down payment on a house and replacing engine on the miata
Are they releasing this to the public on April 2021? Wow that is a long wait.
They have been selling since summer but I think there is a long backorder line now.
@@halomakes I am looking for the M3 AWD Hatchback Turbo 2021. In their website is states, "This product can't be added to cart now. It will be available on 04/06/2021". Bummmmer , lol. Enjoy your exhaust bro.
This exhaust fits only 2.5L engines? Not 2.0L engine?
I'm not sure, we only have the 2.5 here in the states. I imagine it would probably be the same but if you're wanting to get it just make sure you check compatibility with CorkSport beforehand
@@halomakes any idea for the 2.5T engine for the 3 turbo
This one says it's for the 2 and 2.5. I have a 2L, and I'm not sure it'll be worth it.
Fits, 2.5, 2.0 and turbo models
Thanks for the upload. Corksport needs to get off their asses and fab a full exhaust manifold with a high flow cat option, That's the bottleneck of all the HP problems
Update: Just installed the Corksport axle-back, it does sound good, nice deep cold start, not ricey on acceleration, and very low to no drone in the cabin. I did have rear passengers for the shakedown ride, they did have slight drone in the back seats, SGT sedan. I played with the flange mount to get it as flush as possible to the mid-pipe. Maybe a flange gasket, not donut, will even out that very little gap. Did soapy water leak test on the flange, no bubbles. Corksport does have a header for manual models only. At this point, I don't need it. The short ram, cold air box and this axle-back is all I need, looking for cams next.
im living in Malaysia, to get this exhaust is so expensive :(
Just want to is you Mazda3 2.5 or 2.0?
2.5
@@halomakes thanks
are these things only good for manual cars?
mine's an auto. it would probably be more useful in a manual since it lets you hear what the car is doing a bit better but it's still fun enough in an auto
You didn’t remove anything on it all you did was add the corksport Axelback exhaust?
Yes the full process is shown in this video
My state cracked down too hard on aftermarket exhausts. Sounds good though.
Before anyone asks, I get why - people take shit way too far.
What about the gas spitting out the exhaust
That was condensation from warm air blowing through a cold pipe. if you had liquid gas coming out of your exhaust something would be very very wrong with your car
So one pipe is suppressed and the other isnt.
Bolts ain’t come off that damn easy
Dam, I live in a condo, my neighbor's would not be happy.
10:07 A lo que vinieron
mehhh its kinda ricey, the magnaflow sounds a lot more cleaner. corksport makes good products but this is too loud for me, i enjoy the quiet cabin of my 3
😂absolutely a waste of money
You’re a waste of space
Nope!! Built nice but it’s a stock sounding 👎🏽