Hey bro you know anything about the Ford Focus my key and getting locked out basically do you think I can get a spare key fob and program it with my one keyfob I got
I accidentally locked my keys in my F-150 Ford. I had my brother rig open the door in order for me to get to my keys. When I finally got my keys I went to turn on my truck and the theft light came on. Ever since then I've been breaking my head trying to figure out how to deactivate the theft system. Do you have any advice on how to turn my vehicle on? Thank you!
@Hindsight 101 So I have one Ford factory key with programmed FOB and another key with no FOB but cut at a local hardware store .. would these work to program a 3rd key ?
Dude That was a perfect video, short & to the point. I CAN'T THANK YOU ENOUGH!!! You saved me $200.00 from the dealer wanting to program my truck but also keeping it for 2 hours. If your ever on the west coast hit me up & i'll by you lunch!!! THANK YOU AGAIN!!!!
FWIW My 2016 Ford Focus doesn't chime. Not sure why, but I just watched the lights on the dash and waiting until the BRAKE light on the speedometer turns off is the equivalent of the "chime". So just wait for that on each key turn and it'll work like a charm.
I watched a dozen other videos showing how to program with some dealer software. Your video was by far the best to understand, and simplest to perform. Hope it gets more views and sent to the top to help others!
Derrick you're brilliant as providing clear, succinct explanation without any unnecessary repetition, a very useful talent, difficult believe that you only have 2..2K subscribers - + one more now - me!
I am so very thankful for your video. The ignition programming went without a flaw. The "fob" part took me several tries before I got the telltale door locks locking indicating I was in the program mode, so do not give up! Thank you again! If you were local I would buy you lunch!
These simple, clear to understand instructions worked perfectly. My spare Ford Explorer 2013 key is now fully programmed. I saved hundreds of dollars by buying a key from Amazon then getting it cut for free at Ace hardware and following these simple steps. Thank you Derek you're a lifesaver!
Thanks so much for the instructions; it ABSOLUTELY works my keys and key fobs are programmed. 2 keys from Amazon for $30 bucks - Home Depot cut for $3 bucks each and the dealership was asking for $250 for one key.
You are an honest and intelligent person. I tried several other videos none worked. Yours did absolutely magnificent. Thank you for sharing your knowledge and most of all being honest, and saving me $180 dollars x2 I highly recommend video!!! Thanks again!
Alright! I really am impressed. Easy as 1,2,3. Thank you. I did take the fob apart and was worried that the servos were bad, and I felt that I may need to replace the fob. But it worked. Now I am going to get a second key and fob. The car came with only one. I will use this video to program the key and new fob. Thank you. The car is a 2005 Mercury Marquis.
Thank you for this awesome video. I was trouble shooting a 2006 explorer. No dash lights no crank issue. No Bling when the key was in the ignition. This fixed my problem. God Bless you, you’re an angel for helping people. My mother in law thanks you as well, her car. Repair 0$.
Thank you so much it worked with my 2012 ford focus. My key fob went dead and had me frustrated of why it wasn't working. I cannot believe that this video saved me a trip from going to the locksmith!
Ordered 2 keys from Amazon for about $50, got them cut for 40, and used this to replace the 2 that snapped off at the hinge! This video should have GOAT status!
Thank u so much. Worked like a charm. Dealership quoted me $450 for one new key. Bought two keys from Amazon for $40....had a locksmith cut them for $20......$60 total for two new keys fully programmed. Wow!
Thx, just so you guys know, leave the key turned forward after the 8th turn then press a button on the remote before you remove the key. Appreciate the video 👍
Derrick, thank you!! I found other instructions that did not work. They said "didn't work do it again" Your instruction worked first time. Easy as can be. Thank You!!!!
Thank you!!! I appreciate the video!!! I tried it once and it didn’t work. I tried again and waited for the chime to stop ringing then inserted the second key and waited. Then I put the new key and it worked!! Thanks
Worked perfectly, thanks. Saved me $40 programming fee. Others may have noted this in their comments, but just to re-iterate… DON’T touch the brake pedal after you get in.
Touching the break broke one of my relays and my engine fan wouldn't turn of. Ran my battery low and had to boost it. The relay was only $15 for 2, but I would like to reiterate, don't touch the break in the process.
Thank you so much!...and for anyone wondering like I was, you don't need two master keys. I used a valet and a master (in that order) and the new key was programmed and worked like a master key!
Thanks to Derrick, I was able to save a lot of money for my daughter’s boyfriend! Programmed 2 extra keys for a 2014 Ford Mustang. Awesome instructional video!
Just did my 2011 F250. Worked like a charm. The new remote doesn't have the remote start function but that key wont need it. The remote door lock and unlock work just fine with your method too. Thanks
All other methods failed. This video and your method worked great on a 2013 F150 STX! Thanks! It worked on the first attempt..Programmed to start and all the buttons worked without a second procedure.
Sweet. Saw a different video that only showed how to program the buttons. Didn’t say anything about that not working to start the car. I was pissed until I found your video. Thanks for reducing my stress and saving a trip to the deal.
You need 2 keys to program a third key. So if I lose one of my keys I can always make another spare. If I have two keys and lose one I would have to pay someone to make a new key for me
Well, YES. That is good thinking Hindsight 101, and certainly lives up to your You Tube user name. I was just meaning that the majority of people needing a new key, have already LOST their spare, or BOTH keys already. I think very few people are as precautious as you are. I do see your point though, and agree with it!
Life: Hindsight 101 I just learned this the hard way also to have my original key found three days after I had a locksmith cut and reprogram two keys for me, now I’ll be reprogramming my third key.
Great video! If I have two ford factory keys, but only one of the fobs will work, can I program the second fob if only one works? Both keys turn on the car and I replaced the battery in the fob but it won’t lock or unlock the car.
Yes you need 2 key to program another key but you are actually reseting all the fobs so thats why you have to redo all of them at the same time. You just need a key to program your fob/s having a working fob means nothing.
Hi guy... You saved my day. I got a variant for a Mondeo 2001 GHIA, To reprogramming fob after ampty battery. I turn from ‘3’ (contact position) to ‘0’ 4 times quickly, and then I listened the chime, then I pressed the ‘close the door button’, and voilà, my fob resurtected (yes 4 times not eight)
So , I just bought a key from ford. It was $135 just for the key and then they wanted an additional 300 to program. It’s just the key with a chip. I said I’ll come back. Thanks to your video I was able to program my key by myself in less than a minute. I’m so pissed that they were actually going to charge me that much for what I just did with no tools. Thanks again.
very good tutorial, I spend hour follow instructions with new keys then car manual with no luck, then try it yours and all 4 keys programmed right away!
Here's the scoop. I have a 2013 F-150. The unlock button on my key fob went south. Ford dealership wanted $167. for a new key fob and another $40 to program it. The nice man in the parts department mentioned I might be able to get a new key fob on line for less. Sure enough I found one for $19.xx on Amazon. I watched a couple of different RUclips videos to see how to program the new key. One, which seemed very straight forward and dealt with the 2013 F-150 didn't work for me. I tried the procedure at least seven times... no soap. I was about to take the key & fob to Ford and have them program it, but having watched your approach, I thought I'd give it a try. Worked first time! I watched your video several times (I'm a little slow.) to be sure I had the sequence, as simple as it is, down pat. The last time I watched I noted that in the final step you left the ignition on after the eight cycles and just prior to pressing the lock buttons on all three key fobs. Don't know, it's very subtle and easy to miss, but may be important to the success of the procedure. In any event, I'm thrilled... nice job on the viddy!!
one question. will the new programmed key be a mykey or regular key. because the mykey doesnt let you go over 14 volume on the radio. its basicallt like a kiddie key and it sucks
When I used to have a 2005 Ford Focus. I had 2 key fobs at that time. Only one of them worked for the car. I never had that problem when I had 2011 Mercury Milan, 2015 Ford Escape, or even my current 2020 Ford Escape SE. My last one that I have on 2 different key chains. One with a pink theme and the other one with a blue theme. The pink one is my main one.
Hello. I only have 1 original key from a 2nd hand ford escape. will the programming work if I buy 2 new keys and have them cut then do the programming? Will the programming work for the 2 new keys? Thank you.
So even with the the fob programmed but the key is not, the car won't start? sorry for a stupid question but I have a ford with an issue of not starting and just wondering if that could be it. Thanks for any input you give me!!
Great video. I have 2 original keys to my 2015 Escape. Can I buy 2 additional (now total of 4) and program the 2 additional at the same time? Of would I have to follow your procedure twice. Once for the 3rd key, and all the steps all over again for key #4? Any help appreciated!
great video but one question, this is to program transponder? meaning, i have one original key that works and i have a second key that was from another car but the cut is new and inow i need to program the immobilizer so this will work? many thanks
@@Hindsight101 if there is any workaround to copy the signal from transpoder into the 2nd key without going to a locksmith. i have read several posts but the majority i need 2 keys with active transponder to be able to activate 3rd one
i have a 2016 ford focus flex fuel, im unable to get the car into program mode, i follow the steps, but the doors do not auto lock after turn the key to run and off 8 times. Any thing i might be doing wrong ?
Will this work the same way on a 08 crown Victoria police interceptor? I’m purchasing 2keys similar to yours from Amazon will it program after getting the keys cut from Home Depot I think.
Will this work if my key isn’t sending swig all to the starter I only have one key and my car won’t start so I’m thinking it isn’t sending signal to starter, if I go to a locksmith to get a second key and follow these steps will it then send key to starter following this programming ?
I have a question. You said in the beginning that we need two Ford keys to program the third key? My case in particular I have one broken key that snapped in the midde of the key. So why would I need a second Ford key to program my new key?
I have two original keys. One of them the buttons dont work, i just want to add another key. For program mode, will it affect the original key with buttons that dont work?
Now that was a great video my ford mustang convertible 2012 the remote wont work .After replacing battery still don,t work so yeah a little bit sad. When i saw your video and after i did the work as you let me see ...He worked perfect you make a man in Holland very very happy so tanks a lot and if you ever come in holland ill give you a grat heineken beer and a great lunch Thank you very MUCH !!!! 😁😁😁
This video should help answer your questions and it should work for a police sedan. Look in this video description on where to buy a key. ruclips.net/video/0TLCMvSxnys/видео.html
Check out these follow up tips for programing a Ford key since there were a lot of questions ruclips.net/video/0TLCMvSxnys/видео.html
Hey bro you know anything about the Ford Focus my key and getting locked out basically do you think I can get a spare key fob and program it with my one keyfob I got
Sorry you will not be able to
I accidentally locked my keys in my F-150 Ford. I had my brother rig open the door in order for me to get to my keys. When I finally got my keys I went to turn on my truck and the theft light came on. Ever since then I've been breaking my head trying to figure out how to deactivate the theft system. Do you have any advice on how to turn my vehicle on? Thank you!
@Hindsight 101 So I have one Ford factory key with programmed FOB and another key with no FOB but cut at a local hardware store .. would these work to program a 3rd key ?
@@Hindsight101 So I have 1 factory key with programmed fob and 1 key cut at a local hardware store no fob ... can I use these to program a third key ?
Dude That was a perfect video, short & to the point. I CAN'T THANK YOU ENOUGH!!! You saved me $200.00 from the dealer wanting to program my truck but also keeping it for 2 hours. If your ever on the west coast hit me up & i'll by you lunch!!! THANK YOU AGAIN!!!!
Happy to help
FWIW My 2016 Ford Focus doesn't chime. Not sure why, but I just watched the lights on the dash and waiting until the BRAKE light on the speedometer turns off is the equivalent of the "chime". So just wait for that on each key turn and it'll work like a charm.
Thanks for the info
Perfect video, everyone posting on RUclips needs to take a lesson from you and keep it short to the point.
I appreciate that!
I watched a dozen other videos showing how to program with some dealer software. Your video was by far the best to understand, and simplest to perform. Hope it gets more views and sent to the top to help others!
I appreciate that thank you
Derrick you're brilliant as providing clear, succinct explanation without any unnecessary repetition, a very useful talent, difficult believe that you only have 2..2K subscribers - + one more now - me!
Wow, thanks!
I am so very thankful for your video. The ignition programming went without a flaw. The "fob" part took me several tries before I got the telltale door locks locking indicating I was in the program mode, so do not give up! Thank you again! If you were local I would buy you lunch!
You're welcome. If you want to buy me a cup of coffee a link is in my video description.
These simple, clear to understand instructions worked perfectly. My spare Ford Explorer 2013 key is now fully programmed. I saved hundreds of dollars by buying a key from Amazon then getting it cut for free at Ace hardware and following these simple steps. Thank you Derek you're a lifesaver!
Good info thanks
Thanks so much for the instructions; it ABSOLUTELY works my keys and key fobs are programmed. 2 keys from Amazon for $30 bucks - Home Depot cut for $3 bucks each and the dealership was asking for $250 for one key.
My pleasure after spending $250 I didn’t want others to have to experience the same pain lol
You are an honest and intelligent person. I tried several other videos none worked.
Yours did absolutely magnificent. Thank you for sharing your knowledge and most of all being honest, and saving me $180 dollars x2 I highly recommend video!!!
Thanks again!
Glad to hear thank you
Alright! I really am impressed. Easy as 1,2,3. Thank you. I did take the fob apart and was worried that the servos were bad, and I felt that I may need to replace the fob. But it worked. Now I am going to get a second key and fob. The car came with only one. I will use this video to program the key and new fob. Thank you. The car is a 2005 Mercury Marquis.
please take a look at this video before you program the next key and let me know if you have questions ruclips.net/video/0TLCMvSxnys/видео.html
Thank you for this awesome video. I was trouble shooting a 2006 explorer. No dash lights no crank issue. No Bling when the key was in the ignition. This fixed my problem. God Bless you, you’re an angel for helping people. My mother in law thanks you as well, her car. Repair 0$.
no problem
Thank you so much it worked with my 2012 ford focus. My key fob went dead and had me frustrated of why it wasn't working. I cannot believe that this video saved me a trip from going to the locksmith!
Glad it helped . Did the battery die in the key fob?
Yeah
Worked perfectly for 2013 Edge. Spent 50 for 2 keys.. 20 to cut them & all done. Big Thanks!!!
You are welcome. Thanks for the comment.
I spend less than 20 bucks. Thanks for your video and make it very simple for everyone.
Glad the video helped, thanks
Ordered 2 keys from Amazon for about $50, got them cut for 40, and used this to replace the 2 that snapped off at the hinge! This video should have GOAT status!
Thanks 👍
This worked perfectly. Your video was short to the point and accurate. Thanks!
Thank you. People seem to like short and sweet with no fluff
Thank u so much. Worked like a charm. Dealership quoted me $450 for one new key. Bought two keys from Amazon for $40....had a locksmith cut them for $20......$60 total for two new keys fully programmed. Wow!
Awesome
Thx, just so you guys know, leave the key turned forward after the 8th turn then press a button on the remote before you remove the key. Appreciate the video 👍
What if your doors don’t do anything and you keep trying but nothing
½
@@trankquilarts9905 also having this issue
Derrick, thank you!! I found other instructions that did not work. They said "didn't work do it again" Your instruction worked first time. Easy as can be. Thank You!!!!
You are welcome!
Thank you!!! I appreciate the video!!! I tried it once and it didn’t work. I tried again and waited for the chime to stop ringing then inserted the second key and waited. Then I put the new key and it worked!! Thanks
Awesome, thanks for the comment
This absolutely works on a 2011 Ford Escape XLT. I done it to 2 new keys.
Thanks for the update
Thank you!! Ford wanted 389 dollars for a new key, ridiculous
Julie S You’re welcome glad it worked out. If I remember, in my area they wanted $275.
My Ford dealer wanted $400.00 for a key and to program it I found a locksmith to do it for $90.00
Thanks! Works as described, imma leave a donation
Thank you so much! I appreciate it
Dude, that was awesome. You just saved me about $500 Aus dollars. Legend !!!
Welcome
Worked perfectly, thanks. Saved me $40 programming fee. Others may have noted this in their comments, but just to re-iterate… DON’T touch the brake pedal after you get in.
I haven't heard about not touching the brake pedal, why shouldn't you touch it? Also glad the video helped.
I touched the brake pedal the whole time and now my car makes noise after I remove the key. Any idea what to do?
What noise does it make? Possibly do the process over again
Touching the break broke one of my relays and my engine fan wouldn't turn of. Ran my battery low and had to boost it. The relay was only $15 for 2, but I would like to reiterate, don't touch the break in the process.
Thanks so much you saved me a few dollars 😂😂
Awesome thank you for the comment
Looking to do a 2000 ford ranger I just bought with only 1 key. Is it the same process on the older vehicles?
Please check out this video it should answer your question, if you need anything else let me know ruclips.net/video/0TLCMvSxnys/видео.html
You’re the man. Saved me $150 at the stealership
Awesome glad it helped
Thank you so much!...and for anyone wondering like I was, you don't need two master keys. I used a valet and a master (in that order) and the new key was programmed and worked like a master key!
Wow, thanks for the heads up! So, a valet and master combo does the trick, huh? Good to know! Thanks for sharing your experience with us!
Where is your "tip jar?" If this works, I definitely want to send you a gratuity!
Thank you for the support here is the link for a "tip" www.buymeacoffee.com/Hindsight101
Thank you sir for saving me money today! I got my key programmed in just under 30 seconds following your instructions.😎
Nice job!
Dealership be like. That will cost you 500$+ taxes . Kiss my azz
Thanks to Derrick, I was able to save a lot of money for my daughter’s boyfriend! Programmed 2 extra keys for a 2014 Ford Mustang. Awesome instructional video!
You are welcome, I'm glad I was able to help
respect brother
Just did my 2011 F250. Worked like a charm. The new remote doesn't have the remote start function but that key wont need it. The remote door lock and unlock work just fine with your method too. Thanks
awesome
Thank you!!! It works.
Glad the video helped
All other methods failed. This video and your method worked great on a 2013 F150 STX!
Thanks! It worked on the first attempt..Programmed to start and all the buttons worked without a second procedure.
Awesome thanks for the feedback
Sweet. Saw a different video that only showed how to program the buttons. Didn’t say anything about that not working to start the car. I was pissed until I found your video. Thanks for reducing my stress and saving a trip to the deal.
Glad to help
Who buys a THIRD key when you have TWO? Not so many people. I only have ONE key. I NEED a spare. Now, not so easy! Be real here.
You need 2 keys to program a third key. So if I lose one of my keys I can always make another spare. If I have two keys and lose one I would have to pay someone to make a new key for me
Well, YES. That is good thinking Hindsight 101, and certainly lives up to your You Tube user name. I was just meaning that the majority of people needing a new key, have already LOST their spare, or BOTH keys already.
I think very few people are as precautious as you are. I do see your point though, and agree with it!
To be honest I learned the hard way and it was very expensive so I hope people look at this before they lose their key thanks for the comment
Life: Hindsight 101 I just learned this the hard way also to have my original key found three days after I had a locksmith cut and reprogram two keys for me, now I’ll be reprogramming my third key.
Well at least you have an extra spare now. If you lose one you can program a third on your own
This was awesome! By far the best tutorial that talks about both programming the key and key fob!
Thank you
You best in this
Do you know if the 2020 transit come with remote start ?
Great video! If I have two ford factory keys, but only one of the fobs will work, can I program the second fob if only one works? Both keys turn on the car and I replaced the battery in the fob but it won’t lock or unlock the car.
Yes you need 2 key to program another key but you are actually reseting all the fobs so thats why you have to redo all of them at the same time. You just need a key to program your fob/s having a working fob means nothing.
THANK YOU SO MUCH!!!!!! I can’t believe how easy that was!! I was able to program two new keys. You saved us so much money!
Great to hear!
Great video. I have referenced this a few times now and have it bookmarked. Thanks for taking the time to create and post this tutorial!!
Very welcome!
Thanks Derrick your video was great. I followed your instructions and my new key works great...keep up the good work....Have a blessed day!
Thank you so much
Hi guy... You saved my day. I got a variant for a Mondeo 2001 GHIA, To reprogramming fob after ampty battery. I turn from ‘3’ (contact position) to ‘0’ 4 times quickly, and then I listened the chime, then I pressed the ‘close the door button’, and voilà, my fob resurtected (yes 4 times not eight)
Thanks so much for this! Seriously, this saved us a bunch of headache and an hour of labour at the dealership!
No problem you are welcome
So , I just bought a key from ford. It was $135 just for the key and then they wanted an additional 300 to program. It’s just the key with a chip. I said I’ll come back. Thanks to your video I was able to program my key by myself in less than a minute. I’m so pissed that they were actually going to charge me that much for what I just did with no tools. Thanks again.
I paid the first time thats why I made the video. Thanks for the comment
It must work, have never seen so many good reviews i try tomorrow
Hope you like it!
Bro good looking out. I was stuck for a long while. Appreciate big homie
@@shawnbrown9526 no problem
This really works. My local Ford dealer wanted $90 to program the key.
I’m happy it helped
2nd video I watched and it worked!!! Yay!! I'm sure the people in the Ace parking lot looked at me crazy when I hollered YAY!! Thank you!!!
Lol hey as long as you got it working
Rock on thanks I got all my keys working again. Do you know how to register two administrative keys ford focus?
You're welcome and sorry I do not
very good tutorial, I spend hour follow instructions with new keys then car manual with no luck, then try it yours and all 4 keys programmed right away!
Thanks the video helped
Will the older fobs work on this kind too? the ones that aren't in the same key.
Yes
Hello, thanks for the video and what about you have PATS security ?
This is awesome just worked for my 2014 ford explorer !! Many thanks from NYC
Great to hear!
Worked perfectly on my 2017 Ford Escape, you saved me $200, THANK YOU SO MUCH☺️
No problem happy it helped
Thanks for the vid. Do you have to press the lock button? Can you press the unlock button? My lock button doesn't work on one of my fobs.
I don't think so but you can try it
It works with the unlock button…just did it. Thanks for the vid!
Thanks, Derrick! Worked first time as you showed.
Great to hear!
Thank you for the video, On both of my keys the lock button doesn’t work, did it get un-programmed or damaged, would you know about that?
Did you check the battery?
Thanks!
You bet! And thank you
Saved me a ton of money! I got the FOB part but couldn’t get the key to turn over. You are amazing!
Welcome
Thank you thank you! This step seems to be omitted from all the other programming tips. Saved me $55 from a locksmith.
Awesome
Here's the scoop. I have a 2013 F-150. The unlock button on my key fob went south. Ford dealership wanted $167. for a new key fob and another $40 to program it. The nice man in the parts department mentioned I might be able to get a new key fob on line for less. Sure enough I found one for $19.xx on Amazon. I watched a couple of different RUclips videos to see how to program the new key. One, which seemed very straight forward and dealt with the 2013 F-150 didn't work for me. I tried the procedure at least seven times... no soap. I was about to take the key & fob to Ford and have them program it, but having watched your approach, I thought I'd give it a try. Worked first time! I watched your video several times (I'm a little slow.) to be sure I had the sequence, as simple as it is, down pat. The last time I watched I noted that in the final step you left the ignition on after the eight cycles and just prior to pressing the lock buttons on all three key fobs. Don't know, it's very subtle and easy to miss, but may be important to the success of the procedure. In any event, I'm thrilled... nice job on the viddy!!
Thanks a lot I appreciate the feedback. Glad the video helped out
one question. will the new programmed key be a mykey or regular key. because the mykey doesnt let you go over 14 volume on the radio. its basicallt like a kiddie key and it sucks
Sorry I am not familiar with mykey
Did you have to have the admin key when you did this or can it be any key that starts the car?? reason im asking is because i am stuck in mykey mode
Sorry not familiar will the mykey system
Thank u so much!!!!! I been dying to use this and it didn’t work the way website said, two tries your way and boom! I’m so excited lol
Welcome
When I used to have a 2005 Ford Focus. I had 2 key fobs at that time. Only one of them worked for the car. I never had that problem when I had 2011 Mercury Milan, 2015 Ford Escape, or even my current 2020 Ford Escape SE. My last one that I have on 2 different key chains. One with a pink theme and the other one with a blue theme. The pink one is my main one.
Thank you Sir 😊 💓
Welcome
Hello. I only have 1 original key from a 2nd hand ford escape. will the programming work if I buy 2 new keys and have them cut then do the programming? Will the programming work for the 2 new keys? Thank you.
This video will help answer your questions ruclips.net/video/0TLCMvSxnys/видео.html
Should these same steps work if you have replaced the PCM or will I still need a scan tool?
Sorry not sure
Hey I’m having trouble with a 2022 ford transit connect. Will this work for this year make and model??
I am not sure on that year never tired
THANKS, WORKED PERFECTLY in a F150 XL 2011, now I have 3 working keys, no problem if one is lost
Awesome glad it worked out
I liked this guy!! Very straight forward no long intors etc! Good joob bro!
Thank you
So even with the the fob programmed but the key is not, the car won't start? sorry for a stupid question but I have a ford with an issue of not starting and just wondering if that could be it. Thanks for any input you give me!!
If I understand you correctly you stated the key is not programmed? If that is the case the car will not start if the key isnt programmed.
Many Thanks! Worked perfectly on my first try.
Awesome!
Great video. I have 2 original keys to my 2015 Escape. Can I buy 2 additional (now total of 4) and program the 2 additional at the same time? Of would I have to follow your procedure twice. Once for the 3rd key, and all the steps all over again for key #4? Any help appreciated!
You can program the two keys at the same time
great video but one question, this is to program transponder? meaning, i have one original key that works and i have a second key that was from another car but the cut is new and inow i need to program the immobilizer so this will work? many thanks
Not sure what you are asking
@@Hindsight101 if there is any workaround to copy the signal from transpoder into the 2nd key without going to a locksmith. i have read several posts but the majority i need 2 keys with active transponder to be able to activate 3rd one
@@Hindsight101 better, this tip from you is to setup the buttons in remote or can i also activate/copy the chip signal for immobilizer?
Check out the link in the notes in my video. It will show you how to use a remote start, besides that I do not know of any other way
Nice tip. You saved lots of headaches to lots of people. Thanks for sharing.
Welcome
I'm glad you mention you need two keys , The other video's, use two keys but never indicate the you need 2 working keys. in order to do this.
You're welcome
Do you have to have 3 keys for this to work? Also are you saying have the new key cut with programmed key to work?
This video should answer your question ruclips.net/video/0TLCMvSxnys/видео.html
When you say you need two keys to program another key does it have to be two keys with fob or no fob is needed?
@andremateus3687 it doesn't matter five or no five as long as the keys turn on the car
Perfect video. Straight and to the point. Thank you!
Thank you
HEY GOOD JOB I HAD TO REPLACE MY COMPUTOR AND RESET MY KEYS YOU HELPED ME ALOT THANKS
Welcome
hey just to clarify- u have to have two programmed keys in order to add the third key?
@@billybrackett1217 correct
i have a 2016 ford focus flex fuel, im unable to get the car into program mode, i follow the steps, but the doors do not auto lock after turn the key to run and off 8 times.
Any thing i might be doing wrong ?
it should work not sure
Hello, thanks for your video. Clear and to the point. One question though. Will it work on an german made 2003 Ford Focus ST170? Cheers!
Unfortunately I do not know but if you try it please come back and let the community know
When I program the key (not the fob) after I put in 2 working keys will other keys that I don't have with me be deprogrammed or will they still work?
Correct you need all keys with you or they will not work
Will this work on 07 ford f150 w manual windows? Btw thanks a lot por this video, it is very helpful!!!
I think so
Will this work the same way on a 08 crown Victoria police interceptor? I’m purchasing 2keys similar to yours from Amazon will it program after getting the keys cut from Home Depot I think.
I can't say for sure but I have seen other vehicles that were manufactured by Ford use the same process
😱 this process really works I have Ford focus 2013 this video is fantastic thanks 👍
Thanks for the info. Glad it worked out
I only have 1 original key at the moment can't find the other. Will I be able to do this if I purchase a second key?
This video should answer your question ruclips.net/video/0TLCMvSxnys/видео.html
Will this work if my key isn’t sending swig all to the starter I only have one key and my car won’t start so I’m thinking it isn’t sending signal to starter, if I go to a locksmith to get a second key and follow these steps will it then send key to starter following this programming ?
Please check out this video it should answer your question, if you need anything else let me know ruclips.net/video/0TLCMvSxnys/видео.html
I have a question. You said in the beginning that we need two Ford keys to program the third key? My case in particular I have one broken key that snapped in the midde of the key. So why would I need a second Ford key to program my new key?
Because you have to put 2 keys in the Ignition to program the new key (third key)
I have two original keys. One of them the buttons dont work, i just want to add another key. For program mode, will it affect the original key with buttons that dont work?
You should be fine
Now that was a great video my ford mustang convertible 2012 the remote wont work .After replacing battery still don,t work so yeah a little bit sad. When i saw your video and after i did the work as you let me see ...He worked perfect you make a man in Holland very very happy so tanks a lot and if you ever come in holland ill give you a grat heineken beer and a great lunch Thank you very MUCH !!!! 😁😁😁
Lol thanks happy to help 😀
Good info, would this work on 2014 ford explorer?
It should
Did it work for your 2014 Explorer?
do the first 2 keys need to be programmed for the 3rd key to become programmed? Or can the first 2 be unprogrammed as well, as long as they are cut?
Please check out this video it should answer your question, if you need anything else let me know ruclips.net/video/0TLCMvSxnys/видео.html
will this method work on 2015 ford taurus police sedan? with only 1 key and 1 remote, also where do i buy the two in one key?
This video should help answer your questions and it should work for a police sedan. Look in this video description on where to buy a key. ruclips.net/video/0TLCMvSxnys/видео.html