How to restore your wheels at home
HTML-код
- Опубликовано: 23 окт 2024
- Intake! S1E6 - How (not) to paint your wheels
Here is a job anyone can do at home, all you need is some wheels!
Today we hit maximum frustration as I attempt to paint the faces of the cheap Volk CV Pros and everything goes wrong. Who knew working on the z32 would be so frustrating, and I am not even working on the bloody car today!
Grab a beer or six, kick your feet up and enjoy Episode 6 of Intake while we freshen up the wheels for the Fairlady Z. Produced in conjunction with Forever Digital, join me as I smash out the build on Project Z!
We have facebook now, and will be posting up photos and news from behind the scenes!
/ intakegearsbeers
The Mario sounds were hilarious when added sparingly, you need to just not use them for every single thing m8 😂
But don’t get me wrong, this is still my favorite build series so far
Cheers brother! Still finding our feet. But love the feedback!
I agree and I hope intake finds the balance. With sparing usage they are funny but they are getting worn with current usage. Overall the channel is pretty funny
I like the usage. And the theme going quietly in the back is great too. Lot of youtubers out there with great content but with long talks it's a bore for being so quiet
Also agree. Couldn't watch this episode because of the stupid noises.
Love finding high quality builds and videos like this. Doing a great job!
JB243bikes And we love seeing high quality comments like yours! Good stuff Brother!
Loving the channel Stivva! Been following your builds since rb26 VS Calais days 👌👌 keep kicking goals mate
rch13z cheers Brother! And hopefully you are watching the show the right way, kicked back with a cold beer in hand.
Intake! Unfortunately not - was hanging for a king brown though 😂😂
Another quality video. Good job mate keep them coming. Love the gun metal grey it looks good.
I really enjoy this channel and the geniuine presentation with mistakes left in. I hope this channel grows
Haddedam cheers Brother! We will continue to do our bit and film Stivva stuffing around in the garage as long as you do your bit and keep watching the show!
Love the message at the beginning mate, loving the show aswell. Keep it going!
Matthew Lill Cheers Brother! We thought it was an important message to convey!
Please keep going! This is briliant, i see the next Migty Car Mods in you
AllTheAces cheers Brother! But, I just sold my s30, and those blokes have only just bought one. So they way I see it, they might be the next Intake!
Best channel on you tube! Up there with MCM 😊
Dean Martin best comment on youtube! Up there with how good Fridays are!
Love the 8 bit Mario sounds. Keep me hyped to keep working and fucking things off!
Refreshing show
Your estimates of beer intake are shit though
Typically it’s a 3 slab job over two days
I also recommend more drunken belligerence with yelling at clouds and blaming 457 visas and politicians to make it more Australian. Then cut to apologies the next morning. The fact you have not pegged a 14mm spanner across the garage at your mate also concerns me you are not taking this seriously?
Great video mate!
#1 of 500 ... looks good
About time you post
Looks dope my dude also up the bunnys ❤💚
Oliver Neville cheers Brother! SSTID
Love the show mate! just wondering what grit sandpaper you used on the wheels?
Rhys Irvine Shit! Sorry man. I should have said. It is an 800 grit sandpaper. 800 is my go to sandpaper for wet sanding. The right balance 0 and 1600.
I took my zed to get new semi slicks, when i serviced her later i had to use a 1inch air impact gun to crack the nuts -.- you'd think tyre shops would torque spec them
Alteh always gotta torque to spec man!
il have one large chicken taco with extra cheese and chilli sauce... good work man looking better and better every episode
craig mcnaught oh mad. You found the order Taco button. Beer on the side?
shit yea ... its not a good taco without a beer to wash it down
Awesome video keep em coming bro...your funny af beautiful car
Chris Galindo and you're awesome as fuck!
ahhh another amazing vid!!
Mezzarino and you are another amazing Subscriber! Thanks Brother!
thanks man, i hope to have as funny/good videos as you!! that 4k though
Rotas are awesome 😁 need to try a carton of sapporo beer i think
Andrew Bax You just can't stop at one on a hot day!
HAHAHAHA THE INTRO IS AWESOME!!
those came out reeeeeeeeeeeeeally good
BrabusTKR wheely fucken good?!
Intake damnit! Missed opportunity
Yes! Grey looks great, which is what I chose.
I’m not sure about the red nuts and I’m a bit sad you didn’t clean up the backs more before you put them back together but hey ho. Still a good episode!
Looking forward to the next one
Jordan Carter cheers Jordan! We dead sst were not going to paint the backs of the wheels. But hit them up at the last minute. The best thing about the VHT wheel paint is that it covers nearly everything!
Intake not trying to be a downer buddy, enjoying the series a lot, can’t wait to see what you do next.
Cheers!
Absolutely mate! We love hearing from all you guys no matter what! Cheers bloke!
Fuck, i love seeing your vids show up in my feed
MultiNedia cheera brother! And I love seeing your comments on my videos!
I love your content
I restored a set of Rays Engineering Volks, you should have had the tires pulled off the rims, had the outers machined to get rid of the gutter rash and had the centres blasted and powder coated and had almost new wheels. Great job anyway.
GRIMM REAPER thanks Brother! But we are all about how to do bits and pieces at home and having a good time in the garage. You a dead right though, I would have ended up with near new wheels!
True my wheels took about a month from start to finish because i had to wait for parts to come back, plus I went all out and bought new wheels center bolts and valve stems and rubbers.,Love the vids
These videos are great looking forward to the next one. Cant wait for the muff...ler jokes
Kingsley Newton they are in the 'pipe'line.
This made my shit day fuckin mint. love the content mate
I want those same wheels on my Z
Notice you jacked on the pinch welds there. Did you bend them up a bit lol?
TURNS & BURNS I did not.... they were however, bent up front when I purchased the car, and since throwing the smaller 17s on, I can not for the life of me get the current Jack to the chassis rails.
I need a high quality, low fitting Jack. Anyone?!?!?!
Holden cruzes jack point is on the pinch weld ?? Little bit confusing
No they are not. Google shows us the proper jack points for the 300zx. I made this mistake and had to hammer back my Fender a little bit lol.
Love the vids ...where’s your 260z tho ?
What would you say if I told you I sold it?
Ahhh fuck no, she was a real beaut :(
Cars come and go, its all about the journey. Don't stop believing.
Will you install wide body in the legend?
Slinkier Mallard who knows brother! Anything is possible!!!
@4:06 Aaaahhh your pinch weld!! Don’t jack your car up from there!
It was already mashed brother. It's not getting any worse. But they are getting repaired soon!
Get the noise when sonic loses all his rings.
rodney oscar top notch idea Rodney!
Thank you so much for not playing music the whole time. Now to get you onto some VB instead of that lolly water you're drinking
Also your rattle gun is super weak, it should be able to break most of the nuts you had to manually do - look into a brand "Hilti", we use them on dozers / excavators, can get small ones for cars, good gear.
Wheels look good in gunmetal, I said white but this colour suits well. Looks like a piss around to do yourself though.
I wouldn't reccomend it. Easier just to mask the bastards up.
Intake or pay someone to do it like I did with the VXSS.
If it was me I literally would have just masked it and be done with it in 1 hour lol
NippyMoto and normally I would exactly the same thing. But some bloody genuis thought I would be a great idea to do it the hardest way possible.
Push your breaker bar, never pull! But good job ;)
There's a hot tip right there!!! Cheers Brother!
Intake it just takes the strain off your back. Who wants a broken back? Love the series brother!
Pretty sure your McCheater rattle gun needs more cubes, no where near enough torque.
Tom Ault its going back on the shelf and the Milwaukee is coming out!
What job do you have other than RUclips
babypanda2406 Gday! Good Question! I work on powerlines. Its fucking electrifying!
Intake I bet it fucking is
Are you sponsored by Sapporo? Lol
hippoman982 nope. But if you want to write to Sapporo Australia and get them to throw me some beers that would be awesome
what model are them volk racing wheels? i have original gtc's - no offense but i think them are knockoffs with a volk sticker
Volk Racing CV Pro. They are a 1993 model. They aren't knock off's with a sticker. They would have to be knock offs with the volk branding cast into them and the holographic sizing decal replicated. Not impossible, but implausible.
I do later on find the Rare Volk center caps to suit these (they cost as much as the wheels). Keep an eye out in one of the later episodes.
I love this shit
Birds are friends, not food. Lol
joshXnovak1 why not both?!
Intake last time I made friends with a bird and then ate her, she stuck around much longer than she has initially showed interest in. I suppose, as long as you agree to the terms and conditions, they can be both.
This is a different type of bird isn't it mate?
These is a distinct possibility. Lol
In all seriousness, the car is coming along beautifully. I have yet to work on mine. Seeking a promotion in the coming months with a nice pay bump, as well as getting stationed in NOT Corpus Christi. Hopefully it isn’t a salty, cold, winter 6 months of the year kind of place. The projects will begin then. Starting with fascia, side lips, rear diffuser, tail valence, and wheels.
Hahaha, this is the best automotive channel there is! Honest, not afraid to make mistakes and learn and probably give a lot of amateur mechanics a lot of confidence to tackle a job like this on their own. Good on ya mate from Scotland 🏴
Cheers Brother! Glad to hear it! Be sure to find Intake! on facebook and check out the photos and behinds the scenes stuff that goes on! Loving that Scottish connection!
painted my wheels gun metal and they turned out blue... don't think my primer was good...
Onya Sonya
Brad House Cheers for the Beers for this episode Brother!
Intake another great episode Champion. Any plans for hicas lock bar? I’m thinking of it and not sure how many brews it’ll take.
That is in the works man! But a couple of episodes away. Its gotta be at least a two beer job. But I don't see it being too hard.
Mate, did you also have those fucking small Japanese 5.5mm diameter valve stems? I broke 3 on some BBS LeMans if it makes you feel better. Only one fucker in the whole UK stocked them... Long story...
iamfeck lets just say, we expressed some valves and rim bolts from interstate to compensate (word of the day) for my fuck ups.
Where the fu@k have you been in my life
sticky0420 here, always here. And, in your Dreams.
You spent all that time sanding and painting the center only to but them back on a dirty barrel??
WHY?!
This calls for a proper lowpro jack and not a super cheap auto one 😒😅
Unitesninja ease up mate! The old girl has served me well for 10 years. But your right, and its time to retire her.
Why are you holding a chicken?
Iain DAWBS why wouldn't I be holding a chicken? What does everyone else do with their chickens?
Just found your channel....Love the content but please quit the mario sounds!
ZED ahhh. A Sega fan? We can go the sonic route if you like?
We don't have so many in later episodes Brother.
Intake! Haha thanks! Can't wait for the next outback episode! Just bought the same outback this week! Great channel!!