A cracking Job Izzy. Glad you mentioned about the ties as there will be the comments about them being missing. Steve and Alex have their resident wall tie experts spamming them. Keep up the vids and take care
What a transformation, Izzy. No wonder you were chuffed, and equally important, the client as well, along with potential future work from the neighbours! Nice one. 😊 👍
Great job! I used Thompsons Waterseal once on a wall this was happening to to reduce the chances of things getting worse. It worked quite well, did you tell the customer to use anything on the wall to stop the ingress of water? Also, he may want to get efflorescence off the wall (white marks from the salts in the brick) and white vinegar will do it. There are products that will do it. A few pointers from the professionals are appreciated when it comes to after care.
Totally agree on the Titan gear, SDS hammer drill still going strong 8 years and a lot of abuse later. Pound for pound probably the best tool I’ve ever bought, was £55
Izzy sat watching your step video even my wife watched it and said how neat your brickwork is we'll done to u all from a wet worcester simon let's get onto the steels
Haha thanks Simon, really appreciate you and your wife's comments 😊 small delay on a few more bits...but tomorrow we're getting the extension up to dpx
Really good point, and unfortunately I didn't mention it in the video. Obviously without having a decent drip of 20mm+ like on coping stones, it will happen again. Think the main thing was to make the property look more presentable from the curb side
Can always be cut in on top joint. Stainless steel with a 20mm drip then point it tight would have been great with some breather perps (cell block weeps) amazing work like always!!!
Cest vraiment du beau travail soigneusement fini. Tout avait été construit a la va vite. On le voit bien sur le mur extérieur avec des joints mal faits et le mur intérieur est vraiment bâclé. Il manque juste de passer le nettoyeur haute pression sur les marches et les paliers .
Great question! Some bricks are square and flat on the face of the brick. So they are easy to lay. Whereas some aRe like bananas both on the face, whipping out at the ends and in, in the middle. And also those bricks are also bananaed the other way too. Both ends of the brick to the line and the middle below. Makes for poor workmanship
Hi Izzy keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery up the walsall
![Chino Pacas - Modo Capone (with Drake & Fuerza Regida) [Video Oficial]](http://i.ytimg.com/vi/zjv8TQ0gBkg/mqdefault.jpg)
Excellent work as always Izzy
Thanks brother
A cracking Job Izzy. Glad you mentioned about the ties as there will be the comments about them being missing. Steve and Alex have their resident wall tie experts spamming them. Keep up the vids and take care
Haha thanks very much Nigel, appreciate it!
Wow! you are so incredible Isacc
What a transformation, Izzy. No wonder you were chuffed, and equally important, the client as well, along with potential future work from the neighbours! Nice one. 😊 👍
Thanks Alan! Yea buzzin with this little one! Onto the next 💪 all the best!
another grand job Izzy, well done lad, they'll all want their steps doing, keep up with the jones's!
Haha y'know it mate
What a difference you made with this repair 👍👍
excellent brickwork,nice and clean and tidy ....9.9/10..noticed one brick kicking in the toothing sorry....
Ey, can't be mint constantly 😂 cheers mate, hope your weekend was good!
Beautiful bricklaying
Thanks Tony
Nice and Neat as usual fella
Thanks Steve!
Great job! I used Thompsons Waterseal once on a wall this was happening to to reduce the chances of things getting worse. It worked quite well, did you tell the customer to use anything on the wall to stop the ingress of water? Also, he may want to get efflorescence off the wall (white marks from the salts in the brick) and white vinegar will do it. There are products that will do it. A few pointers from the professionals are appreciated when it comes to after care.
Thanks Steve 😊 ye we recommend the sealer to help reduce the faces of the brick getting damaged again. Told him to give it a coat every 6 months 🙂
Totally agree on the Titan gear, SDS hammer drill still going strong 8 years and a lot of abuse later. Pound for pound probably the best tool I’ve ever bought, was £55
Sometimes buying cheap is the best option
that is a top job, very nice
Is this pete from across the pond in upstate New York love the channel just got hooked up to it a couple of weeks ago. You doing an awesome job.👍🇺🇸
Cheers Pete, really glad your enjoying the videos! All the best!
Izzy sat watching your step video even my wife watched it and said how neat your brickwork is we'll done to u all from a wet worcester simon let's get onto the steels
Haha thanks Simon, really appreciate you and your wife's comments 😊 small delay on a few more bits...but tomorrow we're getting the extension up to dpx
Really good looking brick. Nice and square.
The state of that mixer mate 😂
😂😂😂it's seen better days! 7 years old..but probably mixed 50 cube of concrete in that drum over the years
guys, that is mint that brick work. well done.
Thanks very much brother appreciate it 🤜🤛
Nice job, but, surely if you don't address the no drip edge issue, its gonna do it all again!
Really good point, and unfortunately I didn't mention it in the video. Obviously without having a decent drip of 20mm+ like on coping stones, it will happen again.
Think the main thing was to make the property look more presentable from the curb side
Can always be cut in on top joint. Stainless steel with a 20mm drip then point it tight would have been great with some breather perps (cell block weeps) amazing work like always!!!
The wet weather is a pain for all these jobs. I got soaked yesterday putting in an oil tank base.
Nice job buddy, but hey it’s what we all come to expect.
quality brickwork.
Yeaaa boii💪
Clay and concrete should be separated by an expansion joint , yes the drip was missing on the slab ... all would of been contributing to the failure
Protects the ground from mess with a salvage sheet but doesn’t protect his eyes.
Safety squints
Neat job pal
Thanks mate
Cest vraiment du beau travail soigneusement fini.
Tout avait été construit a la va vite. On le voit bien sur le mur extérieur avec des joints mal faits et le mur intérieur est vraiment bâclé. Il manque juste de passer le nettoyeur haute pression sur les marches et les paliers .
Sehr gute Arbeit 👍👍👍👍👍👍🙋♂️
Thanks so much 🙂
Forgive my ignorance, but why are some type of bricks easier to lay than other types?
Great question! Some bricks are square and flat on the face of the brick. So they are easy to lay. Whereas some aRe like bananas both on the face, whipping out at the ends and in, in the middle. And also those bricks are also bananaed the other way too. Both ends of the brick to the line and the middle below. Makes for poor workmanship
I have the same titan breaker. Had it 3 years now. No problems at all. Bargain
@@allanrobinson621 titan
Can't beat it mate 💪
Good as new? BETTER 👍🏻👏🏻👏🏻
Thanks mate!
Where in sheffield ??? is that where you are from ??
From Derbyshire, work in Sheffield brother
@@IzzytheBricky not too far from me, keep up the good work
Lovely old job.
Thanks mate! Hope you're well and had a good weekend
Tidy job Izzy. Are you going to paint weather seal on those bricks now.
Hiya mate! Yes the client said they were going to give it a coat💪
@@IzzytheBricky That should sort it from blowing👍👍👍. Still waiting to see you get the long steels behind the acros.😜
You are unbelievably handsome.
😂 cheers
Why do you boys up north never use the mixer legs?
I lost my legs in the garage 😂
@@IzzytheBricky 😂😂 fair enough I thought it was a northern thing Steve an alex dont use them either
What's Drew doing these days?
Great question...I have no idea! Spoke to him about months ago and he well well though
Where abouts in Sheffield was you working Izzy
Mate...I have no clue 😂 I put a post code in a turn up . following Google maps all the way 😂 I have no idea about the area I work in 😂😂
Hi Izzy keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery up the walsall
Thanks so much mate appreciate it and always happy to hear your enjoying the videos! Hope you had a decent weekend
ur work is good but those dramatic sound scapes arent neccesarry
You don't abide to safety rules
Thought you would jet washed first mate then lay new bricks
Very bad looking brickwork behind the facing bricks. Did the same bricklayer do both skins.
Think so mate
You always wear a mask but use a rubbish breaker you’re going to have white knuckle soon enough. Get a hilti
What do you think to Stu Cromptons trowels mate ? 10”
Mate, I've never used it! Think it's a brilliant idea for those newer to bricklaying however 💪
I didn't see a SINGLE wall tie
You SAID you were going to use starter packs.......where the F*** were they
Alright mate chill out.
Do you think they used wall ties 100 years ago ? Older building are better then new builds
I saw one! 6:39. What do I win?
@@awt butterfly tie well done snake eyes
Unsubscribe
Lovely old job
Thanks Bud