What do you recommend to me I want a good beginner FPV tiny whoop which you can upgrade when using more? I Already own goggles and an FPV camera. Not a controller. I want to spend not more than 50 euros. Thanks.
Hey, thanks for the support. There is an Amazon shopping list in the description that has what I purchased for this build. It's a tiny all in one camera transmitter. There are several different companies that make them. I encourage you to check it out. Enjoy!
+mattd390 the theory is that with lighter propellers you can achieve higher RPM as well as longer battery life because they take less to spin. With all my testing the results are minimal.
+abghere i haven't ran any real test but my best guess would be about 30 second time loss. (4 minute FT with camera) The camera uses so little in comparison to the motors.
@@UIDIY unless you have a radio with a jp4 in one multi protocol module like the jumper t16 and the radiomaster tx16s. They can bind to pretty much everything.
Best ever Tiny Whoop tutorial!👍👍👍
More speed with all four blades on
What do you recommend to me I want a good beginner FPV tiny whoop which you can upgrade when using more? I Already own goggles and an FPV camera. Not a controller. I want to spend not more than 50 euros. Thanks.
It's very difficult to remove props.
I ripped off 3 motors while changing motor in my tiny whoops.
+Mayur Seebun I found if you use a flat head screwdriver and twist it between the motor and the prop, that works pretty good.
awesome vid bro
+liftedelement04 thanks man. Glad you liked it.
Cool :)
Hey man, awesome vid! Love it! What camera did you use and what antenna was on it? Keep it up
Hey, thanks for the support. There is an Amazon shopping list in the description that has what I purchased for this build. It's a tiny all in one camera transmitter. There are several different companies that make them. I encourage you to check it out. Enjoy!
So cirkular and linear antenna can comunicate??
You'll get much better results if you put a circular polarized antenna on your headset
But i will work?
Yup, the shape determines how the signal look when sent out. Not frequency.
What is the advantage to 2 versus 4 ended propellers?
+mattd390 the theory is that with lighter propellers you can achieve higher RPM as well as longer battery life because they take less to spin. With all my testing the results are minimal.
What is your flight time before and after the camera?
+abghere i haven't ran any real test but my best guess would be about 30 second time loss. (4 minute FT with camera) The camera uses so little in comparison to the motors.
Do these bind?
+Jay Buchanan they only bind to the controler that's comes with it. It's one of the main differences from the blade.
@@UIDIY unless you have a radio with a jp4 in one multi protocol module like the jumper t16 and the radiomaster tx16s. They can bind to pretty much everything.
It is underpowered since you made it bi blade and used e010 instead of E011
The blade mod seemed to have a minor affect on the quad. The e011 wasn't out at the time
Fpv = FIRST PERSON VIEW
Not Vision._.
:D
Sorry for beeing so upset:D
+Tim Obermaier no worries. Everyone is entitled to comment as they please. Sorry for the mistake.
U&I DIY everyone has mistakes:D
Ps.: i liked your diy very much!