AGT Vulcan 3 Full rebuild guide.

HI guys, got a video on the AGT Vulcan 3 today and in this one we put it back together, I wanted to get as much information as possible included in the video so its a bit long but hopefully it will help someone out!
Trigger video:
• AGT Vulcan 3 Full trig...
Sekhmet gauges: 10% off
Code: "SUB12"
www.sekhmetonline.com/?ref=SUB12
Merchandise link:
personalised.clothing/sub12ai...

[@billmasen3923]

I've now watched over 70 different YT video producers on Air Rifles, Mtce, Tuning, Repair etc and Sub12A is by far the most professional and useful.

[@sub12airgunners]

thanks very much👍 we try to give as much info as we can we are really glad it's useful

[@skalliwag2766]

Thank you, great video, I have had my vulcan for 2 years, so far no problems, but you videos give me the confidence to work on my rifle if there is a problem

[@sub12airgunners]

thank you for watching 👍

[@three-phase562]

Very informative video and step by step guide for future reference. The AGT Vulcan, does look to be a nice rifle to work on.

[@sub12airgunners]

thank you for watching 😀 it is a very well thought out gun for sure

[@Tim_Bassett]

to the usual high standard with clear instruction.....good to see the dry lube back 🙂

[@sub12airgunners]

thanks mate we do like our way better 😁

[@ricardofuenteszegarra8408]

Muchas gracias por tu orientación... Soy Ricardo, en Lima Perú.
Un abrazo.

[@lisawood516]

Another great video. Always clear and informative. Great job!!!!

[@sub12airgunners]

Thank you 😀😀

[@rayingles1]

Most interesting the workings of the rifle well explained as always can't fault your videos. Thankyou.

[@sub12airgunners]

thank you for watching 👍

[@gallantone1535]

As usual you make it easy to understand 👍

[@sub12airgunners]

Glad you think so!

[@eds1981]

Fantastic video, very lucky to have you do this thank you.

[@sub12airgunners]

Our pleasure thank you for watching 👍

[@bigchad2374]

great vid looks like a really solid build, very impressed with the v3

[@sub12airgunners]

thanks for watching

[@leec8592]

Fantastic rebuild guide ..... Thanks for posting this 👍

[@sub12airgunners]

No problem 👍 thank you for watching 👍

[@AJ.Roberts]

Mine was a little low on power, I tried it without the transfer port restrictor, but was well too hot even with the hammer wound all the way out, i didn’t want to touch the reg, so I opened up the restrictor by about .5mm and it’s spot on now 👍

[@sub12airgunners]

yes you do have to be carful when mucking about with restrictors

[@AJ.Roberts]

@@sub12airgunners another reason why everyone should have a decent chrono 👍

[@sub12airgunners]

@@AJ.Roberts i still can't believe people shoot pcp's and don't have one, it's mad to me

[@billmasen3923]

Another brilliant and informative video, PLEASE do one on the VIXEN.

[@sub12airgunners]

thank you 😀 there will be one soon 👍

[@crazycressy7986]

​@sub12airgunners I've just watched a video from the Middle East showing the Vixen and on the left-hand side of the receiver there's is a alen bolt ,the chap took it off and then inserts a small threaded bolt and then removed a small brass bush, this gave him more power ?

[@billmasen3923]

@@crazycressy7986 Great info thanks. I've heard you can get better and more consistant SUB 12 power by not using the restricter but properly balance the reg and hammer spring, so you use less air.

[@crazycressy7986]

@@billmasen3923 I don't know anything about the Vixen, only what I've seen ,I should be getting mine at the end of April 👍

[@crazycressy7986]

@@billmasen3923 ruclips.net/video/jWUX6tum_yk/видео.htmlsi=tkcUEgzZYlPZ4UyR

[@OriginalMarkyBoy]

Fair play mate 👍🏽 hats off for such a cool vid 👍🏽😎🐒❤️✌🏼

[@sub12airgunners]

Thanks mate 😀😀

[@airgunnv8541]

Your skills are amazing and so is your talent to present the information. It would be nice if you took some cheap airgun (instead of the premiums for a change) like the Snowpeak pp750 and make your improvements. Very popular gun to mod and I'm curious what you could make of the trigger.

[@david-yy2gc]

Great video

[@sub12airgunners]

Thanks

[@jeffrakotoarison792]

👍👍👍 master of airguns ! Your videos had given a great help for my ftp900 ! Thank you! 👌👌👌

[@sub12airgunners]

glad we could help 😀 thank you for watching 👍

[@brorjordas1979]

Way cool!

[@sub12airgunners]

thank you for watching 👍

[@user-uj2nc7eg5f]

Very informative vedio

[@sub12airgunners]

Glad you liked it

[@user-uj2nc7eg5f]

Dear sir
Plz send me ur link of uragan .22 reg washer sequence.

[@user-kr1sj3hh1o]

منتاز 👍

[@sub12airgunners]

thanks for watching

[@jeffhello1444]

nice one 😀

[@sub12airgunners]

Thank you! Cheers!

[@miguelbonelli8916]

Hola una consulta la pieza dónde lleva las arandela tiene un pasaje de aire la pregunta es ? Esta modificado el orificio agrandando para mejor desempeño de la válvula reguladora desde ya te agradezco por tú respuesta 👍

[@sub12airgunners]

enlarging the washer chamber wouldn't give you any advantage i wouldn't think

[@Adytzu1979]

Hi my friend, I can't mount gauge for regulator pressure on vulcan 3? Please make a video. Thank you

[@Piupiu68az]

Will you do a new run with the Vulcan? thank you

[@sub12airgunners]

there will be a few more vids with the Vulcan 👍