Cruze Coolant Bottle Replacement and Coolant Bleeding

Поделиться
HTML-код
  • Опубликовано: 15 окт 2024

Комментарии • 22

  • @raymorley8241
    @raymorley8241 10 месяцев назад +2

    Great video. I assume the same procedure works on the Cruze 1.4.

  • @tyroneclarke1666
    @tyroneclarke1666 Год назад +1

    Hi mate. When you drained the coolant bottle. Was that drain valve connected to the whole cooling system draining the entire system. Cheers

  • @dmanyeah7963
    @dmanyeah7963 Год назад

    Hi Great video easy to follow. Is this same procedure for a Holden Barina TM ? I imagine it would be just only difference would be the location of the overflow bottle ?

  • @aydncetin7033
    @aydncetin7033 Год назад +1

    Thanks for the video. Your coolant was 50 50 mix?

    • @Zeek800
      @Zeek800 2 месяца назад

      If you live in as area where the temperature goes down guite a bit more than 10 degrees below freezing during the winter you can run 55 coolant / 45 % distilled water.

  • @stillboutit
    @stillboutit Месяц назад +2

    What type of coolant did you use?

    • @killawattgarage
      @killawattgarage  Месяц назад

      Typically I use a penrite brand

    • @stillboutit
      @stillboutit Месяц назад

      Thanks for responding. What's the difference between Penrite compared to the other coolants? It looked like the one you were using was either pink or red ​@@killawattgarage

  • @benwallace1469
    @benwallace1469 28 дней назад

    Thanks for showing the bleed valve..

  • @CACTUS48
    @CACTUS48 11 месяцев назад

    Hi, I have a 2014 Chevrolet Sonic, so to add new coolant, loosen the bleeder screen and fill the overflow tank, where is the old type of pressure release valve that use to be on radiator cap...

    • @killawattgarage
      @killawattgarage  11 месяцев назад

      The pressure cap is on the coolant expansion bottle.

  • @cesargutierrez2708
    @cesargutierrez2708 7 месяцев назад

    hello good video . question wath zise hose to drain plug .

  • @stillboutit
    @stillboutit Месяц назад

    Hello killa watt garage, can you do a video on how to flush coolant for a Chevy sonic 1.8?

    • @killawattgarage
      @killawattgarage  Месяц назад

      Will add to the list

    • @stillboutit
      @stillboutit Месяц назад

      ​@@killawattgarage thank you for considering the video. That'll be awesome when you make it.

  • @stillboutit
    @stillboutit 4 месяца назад

    Is this the same thing as flushing the cooling system?

    • @killawattgarage
      @killawattgarage  3 месяца назад +1

      this is more of a drain and refill. flushing often involves pumping fluid through often in the opposite direction to clean out any corrosion etc

  • @ageraRable
    @ageraRable 2 года назад

    Hi Killawatt , are you based in Perth ?

  • @jonathanpadua9262
    @jonathanpadua9262 Год назад

    Hi killa watt are you base in adelaide

  • @misacbanglay2076
    @misacbanglay2076 Год назад +1

    Thankyou for sharing this.