There are indeed many videos of diy cnc builds. It is very common now. You should investigate if you found this impressive. For what the outcome is in this particularly case, that's a hell of a lot of work. Wrong LM guides used. OK for wood or plastic ...not for metal, even aluminum. Spindle bearings are very likely the incorrect bearings as well. For someone with lots of free time and has equipment and material and wants to make "something", this is pretty good! Unfortunately, extremely limited practical use "as is". .
there is nothing better than the original sound of the equipment working, so you can see how good the equipment was, remove the music at the time of machining, hugs.
Wonderful!! Magnifique really wow. I was searching on how to make a lathe and I found your video wich deeply inspired me on how to make mine. Will be done as soon as I get enough scracps from work! Thank you sir for this beautiful video
You have a mill. Use dowel pins while you're drilling holes, to locate the plates. Then you don't have to deal with all that misalignment. Also, with your calipers, when you're trying to measure the o.c. distance between the two cap screws, measure the head of one of the screw heads and then zero your calipers at that diameter, then you can measure between the two outside edges of the two screw heads, and it will automatically give you the o.c. distance. Awesome and ambitious project, especially with the limited tools you have at your disposal.
reminds me of homer simpson putting toilet paper on all his shaving cuts... i'll just put a little alfoil here, here, here, here, here, here and a little here and over here all level ;)
bonjour vous faites de la belle ouvrage . pour le sécurité pas de lunettes yeux sont très importants hello you are doing beautiful work. for safety no glasses eyes are very important
Really cool build and perfect music. Good video! :)
4 года назад+1
Very good job! Good video. I also plan to build a lathe. Some things I will do differently. Instead of SBR, I will use MGN linear rails. Thanks for the work!
what method did you apply to align the longitudinal linear bearings with the spindle axis and the lead screw? how did you find the perpendicularity of transversal and longitudinal linear bearings?
whats the wobble like of those linear bearings? its seems like a cheap way to make the slide, but compared to a dovetail and gib, it seems like there be a certain amount of play in the bearing that you could never adjust, which would make getting a good finish on parts pretty impossible.
Planning on making a cnc mill, have a manual lathe. Not going to do a cnc lathe, seems very dangerous since without a strong enclosure, anny a crash can be fatal.
Hello friend, my name is Valmir and I really liked this project, you could share the detailed project with me, because I would like to be able to make one of these for me.
The glass plate was first tested on a granit fitting table with ink paste. And was 100% flat. And I still think silver paper is the best for thickening.
Я полагаю, что грузоподъёмности подшипниковых опор недостаточно. Поэтому работать будет можно только на высоких скоростях, с малым съёмом металла. Но это не уменьшит производительности ЧПУ станка.
What a great trick with the foil and glass!
very nice... here is an example of someone not doing a 700 video series of a building... 👌👌👌
@@princeyousef2858 you bot dont have GF..
I can't imagine how much time and effort you spend doing this lathe. Big respect for that.
I appreciate that you left in the small fire at the 16:00 mark, glad to see that it was handled calmly.
Thank you for watching M8
hope you find inspiration here
Nice project and amazing video
Thanks for sharing
I like the music....fits with the hard metal drilling and welding!
And the accidental fire
That’s a really nice build. Never seen a diy build with a cnc. Really impressive.
There are indeed many videos of diy cnc builds. It is very common now. You should investigate if you found this impressive.
For what the outcome is in this particularly case, that's a hell of a lot of work. Wrong LM guides used. OK for wood or plastic ...not for metal, even aluminum. Spindle bearings are very likely the incorrect bearings as well.
For someone with lots of free time and has equipment and material and wants to make "something", this is pretty good!
Unfortunately, extremely limited practical use "as is".
.
Awesome work. Thanks for sharing.
Ahh man this reminds me of when me and my buddy would work in the shop... Redoing stuff, catching papers on fire... The good ole days!
nice :))
Very interesting, I am thinking of building a unit to on my wood lathe,
I just want to say WOW! Lots of learning from this video.... thanks
Excellent Work it’s is very difficult To made a lathe machine but this man perform very difficult work into easy way
there is nothing better than the original sound of the equipment working, so you can see how good the equipment was, remove the music at the time of machining, hugs.
Great video sir.
Sir, You are excellent.
Very very good 👌👍👍👍
Magnificent!!! 👍👍😲
Uauuuuu
it is a beautiful machine
Wonderful!! Magnifique really wow.
I was searching on how to make a lathe and I found your video wich deeply inspired me on how to make mine. Will be done as soon as I get enough scracps from work!
Thank you sir for this beautiful video
You have a mill. Use dowel pins while you're drilling holes, to locate the plates. Then you don't have to deal with all that misalignment. Also, with your calipers, when you're trying to measure the o.c. distance between the two cap screws, measure the head of one of the screw heads and then zero your calipers at that diameter, then you can measure between the two outside edges of the two screw heads, and it will automatically give you the o.c. distance. Awesome and ambitious project, especially with the limited tools you have at your disposal.
thank you for the info the next time I will apply this :)
That's a great build. I'd make the head carriage stop movable. Fantastic work!
So Useful.Great.
absolutely magnificent work. Thanks for the inspiration.
great Job, very well done . thanks !!
so much care with that glass trick i also like to work like that {when i can}
love the music
knap gemaakt !!
Excellent Work !
VERY GOOD!!!! Congratulations!!!!!!!
with the tools you have you had to be doing this project for fun, and I can understant that cause I had fun watching, lots of talent great vid THANX
well said THX
wow now that is awesome great work
I like the sped-up music in the background
The best project
Trabalho incrível Parabéns amigo 👍👍👍
Very nice! I wish I had a good enough drill press to make this
хорошая работа👍
Great work, you are on fire 😉 !!!!
That's great!
Superbe réalisation un bon coup de chapeau merci beaucoup
this is not homemade this is shop-made haha but none the less great job thumb up
Great job!
Amazing
good video
Incrível, seu vídeo me encantou 😮
tres bonne music va bien avec la video
The fire catching was very funny. :))
Wow great work! And you did it all by hand and on a drill press!
Wow, very nice job, inspiring me to want to build my own... I'm torn between something like this vs one of the Chinese mini lathes
BRAVISSIMO
Love the glass calibration technique, good work.
reminds me of homer simpson putting toilet paper on all his shaving cuts... i'll just put a little alfoil here, here, here, here, here, here and a little here and over here all level ;)
Thank you for video.
Muito bom trabalho rapaz isto sim e um mestre e lê fabricou o torninho Lindo trabalho fica na paz você sabe de mais
Well done, Mr., well done. =)
Nice one may make one after i finish my CnC Mill
Very cool!
bonjour vous faites de la belle ouvrage . pour le sécurité pas de lunettes yeux sont très importants hello you are doing beautiful work. for safety no glasses eyes are very important
Open my mouth with wordless but gives👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Look like my You have my screenset!
:)
So, this is what Poly was up to when he was not helping Rocky train... nice!
yes :))
Outstanding effort!!! and success!!!!! Congrats!!
This is called mechanical engineering...Not a easy job...👍
THX
Very nice👍
Brilliant!!!!!!
🇧🇷 Ficou Top 👍🏿
Great build. We shared this video on our homemade tools forum this week 😎
thank you for answering me .... please recommend me a model, you are the most knowledgeable to recommend me something good ... thank you!
Really cool build and perfect music. Good video! :)
Very good job! Good video.
I also plan to build a lathe.
Some things I will do differently. Instead of SBR, I will use MGN linear rails.
Thanks for the work!
MGN only have two rows of balls, SBR has 3 and are also adjustable .
Hmm good job but you should apply cover on screw
what method did you apply to align the longitudinal linear bearings with the spindle axis and the lead screw? how did you find the perpendicularity of transversal and longitudinal linear bearings?
Muy bien excelente
الله يعطيك العافية.
Great job
Most aqurated,theoricaly beautiful,fine job,,,,,ultimate standard work by a brilliant man
@@surendrabullets483 Thx M8
świetny projekt 👍👍👍
Buen trabajo
Отличная работа! Надеюсь, у вас будет возможность потом выложить видео полной обработки изделия :) Удачи!
Я тоже сделаю :)
Exelente!!!!! Saludos desde Argentina.
16:00 Fire! You should be careful.
Awesome work man!
And the best part is Trailer Park boys was on your TV in the background lol.
Супер фантастіка ! Фірма класссссс!
whats the wobble like of those linear bearings? its seems like a cheap way to make the slide, but compared to a dovetail and gib, it seems like there be a certain amount of play in the bearing that you could never adjust, which would make getting a good finish on parts pretty impossible.
nice
Very well done and interesting. Can you provide a list of the parts - especially the CNC parts. Thanks
ruclips.net/video/57ZBXyGIDqU/видео.html list of the parts
Planning on making a cnc mill, have a manual lathe. Not going to do a cnc lathe, seems very dangerous since without a strong enclosure, anny a crash can be fatal.
Is it easier if you draw parts in fusion 360 and then edit them on a cnc lathe, or am I wrong :)
Nice work, congratulations... 👍
A lot of work but I am asking ... why did you not use the screw covers? Summing great work :)
Such a video with such a music must be in black-white mode, with FPS around 20, vignetted and with film grains and dust added. :)
grear job! i'm goingto build same lathe.
Hello friend, my name is Valmir and I really liked this project, you could share the detailed project with me, because I would like to be able to make one of these for me.
Love the leveling with the glass plate (how do you know this is sufficiently flat?).
And of course the shims made from euh...zilverpapier.
The glass plate was first tested on a granit fitting table with ink paste. And was 100% flat. And I still think silver paper is the best for thickening.
Now with that stepper powered table just add a vertical drill and you can mill as well.
this is another fun project to do
i keep it in mind thx
Excelente felicidades por tu trabajo, que software y que control utilizaste por favor si puedes compartir gracias
Good work 👍
This is one of my dream machine
made a cnc mill, had for years...have manual lathe, but would never be brave enough to trust cnc on it, stuff up to much without it
İts beautiful... 👍
Я полагаю, что грузоподъёмности подшипниковых опор недостаточно. Поэтому работать будет можно только на высоких скоростях, с малым съёмом металла. Но это не уменьшит производительности ЧПУ станка.
Amazing, can yu give my the links of all parts?
ruclips.net/video/57ZBXyGIDqU/видео.html list of the parts
How much usable cross slide travel do you have? It looks like there is very little.
300 mm on X 125mm on Z
Ești tare flăcău
Very good, you van make the projecto available