Impresionante...bravo 👏👏👏recuerdo en mi juventud como mis profesores me decian en la facultad de ingenieria " una buena cabeza hace mas que una computadora"...!!! Es en nuestra mente donde debemos ganar nuestra primer batalla...esto se cumple en tu espero, dedicacion y voluntad por romper: el no se puede o no es conveniente, o el es imposible hacerlo...gracias por compartir tu trabajo. Los materiales podemos conseguirlo en chatarreras o depositos de compra venta de maquinarias que ya no se usan y reducir y bajar el costo de comprar materiales nuevos...!!!!
a plasma cutter, got one from parkside for 69,- € lately on special offer, cuts 12 mil [ half inch ] on paper, 20 mil in reality, deep. first of all i would send him cutting oil though.
Wow. Did you ever consider the valuable lessons learned in this exercise? Absolutely not. The builder demonstrated pretty impressive skill and that is commendable!
A real one can. I built a 960 cfm Flow Bench way back in 94. Only 5 of us in GA had them at the time. But truly any of you that has the passion. Can build whatever you want. Study study study. Measure twice cut one's and take your time. You'll be sooooo glad you did. I made a living out of porting and building engines. And my family business was plumbing. Don't sale yourself short.
При внешней простоте, весьма прилично выдержаны допуски в размерах и сопряжениях, а если учесть что работы выполнялись в " гараже", с использованием примитивных инструментов, то можно однозначно сказать--- молодец!!! Золотые руки и голова светлая , удачи тебе и всего доброго...
That tool that you have made to hold your grinder for accurate grinding and sanding is quite clever. I looked at your video list but couldn't find it? I think that other people might find it to be of interest? Mark from Melbourne Australia
Работа проделана очень много. Руки золотые ! БРАВО!!!! Как инженер скажу именно по этим станкам. Мартышкин труд. На Ютубе ты заработаеш, но на этом станке нет❤
@@МагомедАбакаров-щ1в конечно в качестве слайдеров есть сомнения, тем более, он сразу их варил, но конструкция довольно крепкая. Ее можно доработать, хотя про старые БУшные тоже говорят, что они изношены. Для домашнего пользования пойдет.
Excellent work! I am a steamfitter of 39 yrs . (retired) Any Welder/Fabricator knows just how hard it is to build this with tight tolerance . It looks good and tight . Is it accurate enough for a machinist ?
@@innovationtime20 какой удалось добиться точности? Я был шокирован от сварки. Обычно все подгоняется по микрометру, а закрепляется потом. Но лайк за труды 👍👋
Wah anda hebat mampu membuat mesin bubut ukuran besar sendirian, biasanya bagi orang yg baru membuat , bikin yang ukuran kecil dulu, saya rasa sudah professional membuat mesin bubut, sukses selalu yah ..kak
Beautiful watching you bring this machine to life with those magical hands of yours, excellent video. I was curious as to how you wired your electronics components? Im in the process of building a CNC machine so it was really cool to see that joystick 🕹️ control you added. Where can one of those be purchased? And can one of those joysticks be added to a CNC machine to used as a type of pendant control interface? Keep up the good work with innovation time lol
Hello my friend I have put the wiring method of this device in a separate video ruclips.net/video/wNruq7Lyiqs/видео.html To buy joysticks and inverters, you can click on the links in the video description 😉
Este foarte ingenios ce ai reusit sa faci, felicitari!! Poti face un video in care sa ne explici cum ai reusit sa faci universalul si cutitul sa functioneze concomitent, ma refer atunci cand faci filet trebuie ca universalul sa mearga inainte si inapoi concomitent cu cutitul! Mulțumesc!
I was in India for product training. Most tools & technology were leftover by the British after independence. Matha Gandhi is the father of new India. Until today most machines are still in use.
That is pretty incredible. Nice you told us it took about a year and $1500, where I am in USA just the material would probably cost at least double that amount. Do you have an encoder linking headstock to carriage/saddle drive? Can you cut other threads or is 2mm pitch only one available?
Thank you my friend In Iran we can find scrap metals and it is so cheap. I didn't use encoder just tow drive command from one joystick to turn left and right but sometimes it makes mistake and the Chuck Motore slows down and threads damaged. Maybe a gear box or a bigger Electromotor or an encoder can solve this problem. What do you think my friend?
@@innovationtime20 I only do manual machining (trained in 1970's) so don't know a lot about electronic controls but saw a video where someone had fitted encoder to make various threads available
واقعا کارتون عالیه فقط یک سوال چرا از یاتاقان خود تنظیم استفاده کردید اینجوری هد استوک و سه نظام تقریبا یک میلیمتر بازی داره؟؟؟چون خودم تو ساختش این اشتباه کردم پرسیدما😂
@@innovationtime20 یک سوال شرمندم شما وقتی یاتاقان ایستاده تعویض کردید بعدش دوباره صفحه پشت سه نظام و شفت رو با یاتاقان جدید هم تراش دادید و ساعت کردید چون وزن دستگاهتون عالیه و نمیشه گفت بابت اون لرزش داره.در ضمن ریلی که برای مینی فرز هم درست کردید ایده جالب و تحسین برانگیزیه .انشاالله موفق باشید و قدرتون بدانند.
ممنونم دوست من آره این کار رو کردم، ولی احساس میکنم وقتی بار زیاد میدم یا یه چیز نامنظم رو تراش میدم کل مجموعه سه نظام و شفت لرزش داره، احساس میکنم یاتاقان ها خوب نیستند
Yes my friend you are right but in my country finding Scrap iron is easy and cheap and finding a used machine is difficult and expensive Fortunately or unfortunately I am in Iran
This is talent way when you synchronize speed by VFD on 2 different motors. Can get ratio number for 2 pitch and you used once switch for on-off two VFD? The big problem is when motor start need time to stable motor torque and if low speed mean the torque also will reduce need high power on motor can balance
Thanks for your comment my friend 💐 Yes you are right When motor start need time , for this problem the driver's have some plans to control rat of start and stop
Your "rack of the eye" technique is only matched by one other person i have met on this planet, my Grandmother, and she has "eyes like a Hawk" 👀 so she says 😂
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Click and Buy similar product 😉:
s.click.aliexpress.com/e/_ok2QzJk
lol thats tiny compared to the monster he build
🎉
Parabéns! Muito bom
Impresionante...bravo 👏👏👏recuerdo en mi juventud como mis profesores me decian en la facultad de ingenieria " una buena cabeza hace mas que una computadora"...!!!
Es en nuestra mente donde debemos ganar nuestra primer batalla...esto se cumple en tu espero, dedicacion y voluntad por romper: el no se puede o no es conveniente, o el es imposible hacerlo...gracias por compartir tu trabajo.
Los materiales podemos conseguirlo en chatarreras o depositos de compra venta de maquinarias que ya no se usan y reducir y bajar el costo de comprar materiales nuevos...!!!!
Заходишь в сайт, пишется что не существует такой сайт, и выстовляются заводские токарные, а не ручной самодельной
Nice job, and a ton of work.
Somebody please buy this man a cutting torch!
Thank you my friend 💐
I have to buy one 👍
When I have enough money 😉
a plasma cutter, got one from parkside for 69,- € lately on special offer, cuts 12 mil [ half inch ] on paper, 20 mil in reality, deep.
first of all i would send him cutting oil though.
@@kevinmullner4280 I considered cutting oil too, lol!
They say that lathe builds itself.
Nice and smart design. I like your approach.
Thank you for sharing
Thanks for watching!💐💐
Really cool video being a machinist for the past 30 years I understand the joys of creating something with your own hands. Keep up the good work.
Thanks bro 👍💐
Wow. Did you ever consider the valuable lessons learned in this exercise? Absolutely not. The builder demonstrated pretty impressive skill and that is commendable!
@@loadmastergod1961
I’m not sure if maybe you read the wrong message but I only complemented the man
@quadspeedfpv I did, my apologies sir.i meant to reply to the fella implying it was a waste of time because a used machine would be cheaper.
This is what every engineer should be able to do
💐💐❤️❤️
I agree
A real one can. I built a 960 cfm Flow Bench way back in 94. Only 5 of us in GA had them at the time. But truly any of you that has the passion. Can build whatever you want. Study study study. Measure twice cut one's and take your time. You'll be sooooo glad you did. I made a living out of porting and building engines. And my family business was plumbing. Don't sale yourself short.
При внешней простоте, весьма прилично выдержаны допуски в размерах и сопряжениях, а если учесть что работы выполнялись в " гараже", с использованием примитивных инструментов, то можно однозначно сказать--- молодец!!! Золотые руки и голова светлая , удачи тебе и всего доброго...
Thank you my friend 💐😊
Felicitaciones amigo eres un gran maestro con muchos años de experiencia laboral desde Venezuela Edo apuré un abrazo fuerte
Gracias 🤝💐
VERY nice ! You make me run out of excuses to procrastinate, I better start building my very own lathe now :)
👍👍❤️❤️
That tool that you have made to hold your grinder for accurate grinding and sanding is quite clever. I looked at your video list but couldn't find it? I think that other people might find it to be of interest?
Mark from Melbourne Australia
Hi dear Mark
Thank you 👍 💐
The link is below 👇
ruclips.net/video/2Pn-et4ARu0/видео.htmlsi=SVGsya1lwIyiRhds
Nice job,I like the way you inovation in making lathes 👍👍
Thanks bro 👍
Je t'aime
Your skill is unmatched, really enjoy your youtube channel.
Thank you so much 🙏
Работа проделана очень много. Руки золотые ! БРАВО!!!!
Как инженер скажу именно по этим станкам. Мартышкин труд. На Ютубе ты заработаеш, но на этом станке нет❤
Thank you for your comment my friend 💐💐
На этом станке он может сделать много того, на чем заработает, а хобби никто не отменял ☝️
Ну ну.
@@МагомедАбакаров-щ1в конечно в качестве слайдеров есть сомнения, тем более, он сразу их варил, но конструкция довольно крепкая. Ее можно доработать, хотя про старые БУшные тоже говорят, что они изношены. Для домашнего пользования пойдет.
@@bobboboff5326 для домашнего да . В самый раз. Мелочевку я делаю на нем. У меня их два. И фрезерный нгф4 тоже. К токарю уже не бегаю.
Excellent work! I am a steamfitter of 39 yrs . (retired) Any Welder/Fabricator knows just how hard it is to build this with tight tolerance . It looks good and tight . Is it accurate enough for a machinist ?
Actually not for accurate case, but often is useful 👍
Great job mate, you have my deepest respect. Well done
Thank you so much 😀💐
with simple equipment, produces extraordinary work, I like your work style.😂❤
❤️❤️💐💐
Ignore the naysayers. By any stretch of imagination this is a fantastic build.
Thanks bro 💐💐❤️❤️
Muy buen trabajo!!!, como haz sincronizado los variadores de frecuencia para poder roscar, y que tal las vibraciones no te afectan el trabajo?
Thanks 🙏
I have made a video for this 👉
ruclips.net/video/wNruq7Lyiqs/видео.htmlsi=hNQo3wJSl7_26eyJ
The DIY of a healthy man.
💐💐
Огромное уважение за работу 👍🤝
Thanks 👍💐
A lot of work but extremely fantastic. Keep up the good work.
Thank you 🙏
Connect all angle's,, plus electronic device,, ang galing!!👏👏
👍🙏🙏💐💐
@@innovationtime20 какой удалось добиться точности? Я был шокирован от сварки. Обычно все подгоняется по микрометру, а закрепляется потом. Но лайк за труды 👍👋
Great job, scary as all heck with those chunks of metal, but you pulled it off.
Je suis étonné de sa façon qu’il a fait ce tour, je suis moi même du métier
Beau travail
Thank you 🙏💐
Undisputed king of pure skill. 🎉
Thank you dear Jack 💐💐❤️
Bagus dan Keren, idenya juga kreatif. 👍👍
Cuma kurang sedikit, yaitu ... Kurang rapi terutama Las-lasannya.
Itu saja seh 😊
Thank you my friend 💐💐
Fantastic effort and result, great grinder skills. A little disappointing there is no 'Coolant System' - just joking. 10 out of 10!
😅👍
Thanks for your comment my friend 💐💐
Great project! Greetings from Finland! 👍🏻🎅🏻🔧🔩🇫🇮
Thanks 👍💐
Wah anda hebat mampu membuat mesin bubut ukuran besar sendirian, biasanya bagi orang yg baru membuat , bikin yang ukuran kecil dulu, saya rasa sudah professional membuat mesin bubut, sukses selalu yah ..kak
Thanks bro 👍💐
Beautiful watching you bring this machine to life with those magical hands of yours, excellent video. I was curious as to how you wired your electronics components? Im in the process of building a CNC machine so it was really cool to see that joystick 🕹️ control you added. Where can one of those be purchased? And can one of those joysticks be added to a CNC machine to used as a type of pendant control interface? Keep up the good work with innovation time lol
Hello my friend
I have put the wiring method of this device in a separate video
ruclips.net/video/wNruq7Lyiqs/видео.html
To buy joysticks and inverters, you can click on the links in the video description 😉
Genioooo🎉🎉🎉
Felicidades y saludos desde Bolivia 🇧🇴💪
Thanks 👍❤️
Este foarte ingenios ce ai reusit sa faci, felicitari!!
Poti face un video in care sa ne explici cum ai reusit sa faci universalul si cutitul sa functioneze concomitent, ma refer atunci cand faci filet trebuie ca universalul sa mearga inainte si inapoi concomitent cu cutitul!
Mulțumesc!
Hi dear David
Thanks 👍
In this video I explained 👇
ruclips.net/video/wNruq7Lyiqs/видео.htmlsi=b7RXM-YPWH9bNgqd
Thank you for giving many ideas......❤️👌👍🙏
💐💐💐
It was an amazing work bro u r doing great,❤
Thank you dear Kumar 💐
The machine is very beautiful. 😊
Thanks bro 😊👍❤️
Super work bro nice quality and perfection, how much coat you spend for it
Thank you my friend
about 1500 USD
You sure are bloody smart, love the machine
Thanks 😊💐💐
I was in India for product training. Most tools & technology were leftover by the British after independence. Matha Gandhi is the father of new India. Until today most machines are still in use.
👍
Very talented person look forward to more projects
💐💐❤️❤️
That is pretty incredible.
Nice you told us it took about a year and $1500, where I am in USA just the material would probably cost at least double that amount.
Do you have an encoder linking headstock to carriage/saddle drive?
Can you cut other threads or is 2mm pitch only one available?
Thank you my friend
In Iran we can find scrap metals and it is so cheap.
I didn't use encoder just tow drive command from one joystick to turn left and right but sometimes it makes mistake and the Chuck Motore slows down and threads damaged.
Maybe a gear box or a bigger Electromotor or an encoder can solve this problem.
What do you think my friend?
@@innovationtime20 I only do manual machining (trained in 1970's) so don't know a lot about electronic controls but saw a video where someone had fitted encoder to make various threads available
nice
Young man you are master of trade
Thanks ❤️❤️💐💐💐
کاش میشد صدلایک کنی تو ارزش کارت خیلی زیاده امیدوارم همیشه موفق باشی افتخار ایرانیها هستی بزرگ مرد
ممنونم رفیق ❤️❤️💐💐
واقعا کارتون عالیه فقط یک سوال چرا از یاتاقان خود تنظیم استفاده کردید اینجوری هد استوک و سه نظام تقریبا یک میلیمتر بازی داره؟؟؟چون خودم تو ساختش این اشتباه کردم پرسیدما😂
@@hoseint-nw6wn آره حق با شماست ، توی کار متوجه شدم لرزشش رو الان هم باهاش مشکل دارم 😅
نظری نداری برای لرزشش 🙂
@@innovationtime20 یک سوال شرمندم شما وقتی یاتاقان ایستاده تعویض کردید بعدش دوباره صفحه پشت سه نظام و شفت رو با یاتاقان جدید هم تراش دادید و ساعت کردید چون وزن دستگاهتون عالیه و نمیشه گفت بابت اون لرزش داره.در ضمن ریلی که برای مینی فرز هم درست کردید ایده جالب و تحسین برانگیزیه .انشاالله موفق باشید و قدرتون بدانند.
ممنونم دوست من
آره این کار رو کردم، ولی احساس میکنم وقتی بار زیاد میدم یا یه چیز نامنظم رو تراش میدم کل مجموعه سه نظام و شفت لرزش داره، احساس میکنم یاتاقان ها خوب نیستند
ketika saya menonton hingga akhir sangat bagus ide pembuatan itu alat🎉 keren ❤
Thank you my friend 💐💐
great job sir you are a man after my own heart great just GREAT
Thank you my friend 💐💐❤️❤️
Impressive! Great work.
Thanks 👍
Conteúdo top demais
Parabéns amigo 👏
Saudações do Brasil !!🤝
+ 1 inscrito no canal !!
Thank you my friend 💐💐❤️❤️
Absolutely incredible work. Mind blowing that you did this with basic tools. Are you a machinist by trade?
Thanks bro 👍
I haven't been a machinist before, but now I have a lathe machine 😉
I salite you sir you are very talented skilled person how to be you😮
Thank you my friend 💐
No need to be me just be yourself 😉💐💐
Belo trabalho. Parabéns!
👍❤️
Excellent!! Great job!!
Thanks 👍💐
Beautiful cuts great 👍
Thanks 👍
Muy exelente,, trabajo,,felicitaciones 👍💯
Thanks 👍
Felizitaciones desde peru. Quiero hacdr uno
Hi dear Walter
I don't suggest making if you can buy one
Tirou minha duvidas parabéns.
❤️❤️
It is a good build and it looks good .
Thanks 👍
it is very good....but it would vibrate.....add much cement for more weight on standing..
Thanks 👍
Good idea 👍💐💐
Super działa !pozdrawiam z Polski
Thank you dear Jan 💐💐
Nossa muito bom seus vídeos você e muito inteligente são Paulo Brasil
Thank you my friend 💐💐
Ola bom dia, parabéns pelo serviço e empenho. Gostaria de saber quanto tempo levou até finalizá-lo.
Hello my friend
Thanks 💐
I spent about 6 month to finish it 👍
Un crack si señor!!! 🙌🙌🙌
💐💐
very good, I envy you when it comes to getting iron, in Italy it's not easy to find all that iron, and if you find it you have to pay a lot
Yes my friend you are right but in my country finding Scrap iron is easy and cheap and finding a used machine is difficult and expensive
Fortunately or unfortunately I am in Iran
Very nice👏👏👏👏👏👌👌👌👍
Thanks 👍❤️
A lot of work here but this was fun to watch.
💐❤️
MUY, PERO MUY, MUY BUENO!!!!!. Gracias
Gracias 🙏💐💐
Cool work thanks 👍
❤️
Ever wonder what happens to those old oil tankers that the cut up on the beach at Alang? This guy makes lathes out of them in his basement.
well done it all works, But i thought you could of done a better job of grinding and milling the welding joints before you painted it,,.!
Thanks bro 💐
Yes, it would be more beautiful if it was grinding
But I think the joints are getting weaker
В любом случае, можно использовать этот станок для постройки пары авианосцев, металла на них хватит 😁
😂👍
@@innovationtime20 на самом деле шикарно 👍. Есть сомнения по точности слайдеров, но конструкция получилась крепкая 💥.
precise & accurate....👍
It's not for selling my friend 💐
Well done mate.
Thanks bro 💐
Excelente.
Felicitaciones.
cuánto costaría?
Un gran saludo y fuerte abrazo.😊😊😊
Thank you my friend❤️❤️
It's not for sale
But I spent about 1500 dollars for making it in my workshop 👍
sehr schön, aber welche Toleranz beim Längsdrehen ? auf 100 mm Länge ?
Eine gute Frage 😅
Es ist nicht so gut, ungefähr 0.5 mm Toleranz
@@innovationtime20 ok, das ist aber für einen Eigenbau wirklich super 👍👍👍👍👍
Good job. ❤
Thanks 👍💐
Quite a mammoth task. I don't quite understand not having Gib strips in the dovetail slides
You are right my friend
This is a big mistake and I need to correct it. 👍
Thank you for your comment 💐💐
Good job
Thanks 👍
سلام خیلی ممنون از لطفتون که زحمت کشیدی ❤❤❤❤❤❤❤❤❤❤دوست شما جنگی ازایران
سلام، ممنونم💐💐
Well done 👍👍👍👏👏👏💯💯💯
Thank you 👍
I wish to know how long it takes you to complete the whole job.
This is talent way when you synchronize speed by VFD on 2 different motors. Can get ratio number for 2 pitch and you used once switch for on-off two VFD? The big problem is when motor start need time to stable motor torque and if low speed mean the torque also will reduce need high power on motor can balance
Thanks for your comment my friend 💐
Yes you are right
When motor start need time , for this problem the driver's have some plans to control rat of start and stop
There is a reason lathes are cast and not welded. Very curious to see what level of accuracy this will be able to hold.
Συγχαρητηρια εξαιρετικη εργασια
Thanks 👍❤️
Your "rack of the eye" technique is only matched by one other person i have met on this planet, my Grandmother, and she has "eyes like a Hawk" 👀 so she says 😂
😂😂👍
Superb
❤️❤️
Great job amazing
❤️
Keren wao, berapa hari anda bikin?
Thanks 💐
about 6 month
It's wonderful 🎉,
❤️❤️
impressive, mad respect!
❤️❤️❤️❤️
Сколько времени ушло на постройку?
about one Year
Не увидел проверки на биение после установки новой передней бабки. Зачётная работа!
👍❤️❤️
Without words
💐💐❤️❤️
Incrivel Parabens
Thanks 👍💐💐
AWESOOOOOMEEEE❗❗❗👊🏻💪🏻💪🏻💪🏻
❤️❤️
Super 👍👍👍👍👍🙏🙏🙏
Thanks 👍
super buen trabajo el video espectacular
Thanks 👍💐
Being poor makes a man a somewhat of a egineer, with a can do mentality. Nice job
Thanks 👍💐
Very good job!
Thanks 👍
Very very nice 🥀🌹🌹🌹🥀
Thanks 🙏
Absolutely masterful
Thanks 🙏💐
You did good but you do know those surfaces should all be bed in right? Ground and shit... How can it be accurate?
You are right 👍
Thanks for your comment 🙂
Very good
Thanks
Muy chingon..
Ing
De la metal mecanica.mis respetos😮
❤️❤️
Nossa ficou muito bom parabéns
Gracias ❤️
Gracias kkkkkk