Building a 19 Plate HHO Dry Cell // My New and Improved HHO Generator!
HTML-код
- Опубликовано: 9 июл 2024
- Welcome to my detailed guide on how I built my new 19 plate HHO dry cell. This dry cell runs on a 12v 30amp power supply, I haven't been able to measure its output yet, but its significantly better than my previous generator. In this project I was attempting to build a new and improved HHO generator to replace my previous one. I did fair bit of research for this project and it definitely paid off. I plan on using this HHO dry cell to power my brazing/welding torch in the future, but that's for another video. I hope you guys got something useful out of this video! See ya in the next one✌
- Time Stamps -
0:00 - Introduction
1:31 - Design & Technicals
5:10 - Materials
9:08 - Assembly
13:01 - Electrolyte
15:30 - Thank You
16:07 - Firing It Up
17:46 - Safety Measures
20:04 - Torch Test
20:25 Conclusion
- My Materials -
Neoprene rubber mat : www.amazon.ca/dp/B071RVVHBC
Potassium hydroxide : www.amazon.ca/dp/B085NG5TRJ
Stainless steel sheet : www.amazon.ca/dp/B00ICS712W
12v 30amp power supply : www.amazon.ca/dp/B07TZMMZ66
If you like seeing content like this then hit the sub button so you don't miss out on anything! Peace y'all ✌
Thanks for watching! 
Хобби
![Skilla Baby - Misfit (Feat. Polo G) [Official Video]](http://i.ytimg.com/vi/IjsylSnNMyw/mqdefault.jpg)
I like it. Final launch sequence 3,2,1, "click". "click, click". Nothing happens.
Lmao.
lol everything happens. thats the arc of the covenant between the 5 elements how can you not see the value of this ancient unity from times long ago
Maybe the best way to cool it down is not to heat it up in the first place. Reduce the voltage to get the mimimum nessesary produduction. That will not only produce the most efficently but the reduced amps×resistance to ion currentn also generates less heat.
If you want to produce even less heat, add more plates to increase the conductivity, which would increase amps but you decrease the voltage even more both control the amps and further improve the efficency.
If the plates were bigger than the gaskets, the plate "fins" could provide surface area to act like a radiator and loose more heat that way too.
Finally someone to explain the dry cell and it's inner workings. Thank you!
Cool idea to use a simple plastic cover to serve as an option when gas pressure is higher than expected
Pretty cool man. I want to make one of these. I’m waiting to go to the dump and collect the ssteel face off an appliance!
Thank you! Good luck with the build!
finally a good explanation! Tks !
I'm glad it helped!
Ingenious.
Thank ya🤟
Amazing project 👌
Thank you my friend! ✌️
Great build. You inspire me to start my own.
Thank you! I'm glad to hear so🤟
A widespread misconception seems to be that such a cell should be called a dry cell. Such a should instead be called a series cell or similar, the defining characteristic of a dry cell is the use of an atleast partially solid electrolyte were the water is directly introduces into a solid electrolyte thus
making spills impossible.
I don’t like misconceptions but I do like a good explanation of a “series cell” which I only understood fully due to this video, thank you!
Very good job on explaining and showing your work
Thank you! Cheers✌
I like the membrane idea! I hope your freezing room is well ventilated. keep up the good work!
Thank you!
Good job man!
Thank you!
Keep building and enjoy what you do... and -- keep learning.
Will do, thank you!
Bro you should check out what happens with the production of hydrogen via electrolysis in the presence of a magnetic field like just from a permanent magnet and also there's byproducts that come from using stainless steel which are undesirable you could say at the very least. these are just things that I've come across in my journey man. I can't afford like Platinum coated stainless steel or anything like that so I'm using graphite that I've cut into sheets but not saying it's the answered or anything but I really like your billd man it's really cool
Thanks man I appreciate it! The hexavalent chromium byproducts is definitely nasty so I've only used my set up sparingly. I wanna look into the magnetic field thing sometime because I've heard it pop up before, maybe I can include it in the next iteration of the build! Thanks :)
Great work. That's a lot of gas. Really enjoy your enthusiasm. Neodymium magnets near your plates can increase the separation, I've seen. (edit from the future David: Rodin and Powell's ABHA coil may be something you want to look into also)Awesome. Thank you for your work bro.
Thank you! I'm glad you liked the video! I looked into it briefly just now and it seems pretty interesting, I'll look into it further
KOH is the source of the O & H. Its that simple. No water is being split.
Sit the unit on kitchen roll, any leeks show up well... When running, use dish washing liquid, mix weak solution, pouring over your fitting if leaks it blow baubles, might surprise how easy to get leaks...
Nice job.. very interesting.
Thom in Scotland.
Great tip!
You could look into a 12volt, 40 - 60amp *CONSTANT CURRANT PULSE WIDTH MODULATOR* to prevent "thermal runaway" , a cintered bronze filter at the end of the outlet tube to atomize the HHO bubbles, enhancing the drying process and an anti flashback, otherwise a good job, well done. One more thing, fill your bubbler, you don't want to store HHO, the more you store the bigger the boom if things go wrong. CAPE TOWN SOUTH AFRICA.
Thanks!
Looks good may be good for car hho design
Nice one day I will actually make the time to build one.
Awesome 👍👍👍 haha the neal from future 😁
Thank you!! ✌️
Good luck 👍
Thanks 👍
❤
I’ve seen where urea ( fertilizer) increases the reaction.
I’m working on trying different frequencies. Everyone is using 60 hertz out of the wall. Starting with golden ratio numbers and frequency’s , very slow process. I believe once the magic one is hit an eruption in the process will occur.
Each idea spurs the next.
I have also heard that magnetic fields amplify the reaction. May be worth looking into if you're trying to boost production!
It's called capacitance, with voltage division between plates. With resistance of electrolye circuit becoming a resistive voltage divider across the plates.
Thanks! I didn't know the term
If you made your homework... what about hexa-valent Chromium?
It gets over time flushed due to the electrolysis from the stainless steel into the electrolyte.
That stuff is dangerous and fatal for your health. Highly toxic and causing cancer.
I recommend graphite or other material without Chrmoium.
Btw. nice generator :)
And anode is positiive ;P
20:00 get these leakages fixed, mate. I wouldn't even dream of using fire in the vicinity of the rig as long as it release gases!
And get an oxygen restrictor in the line. Each time you hear the little *bang* when the torch is lit, is a flashback.
Thanks for the feedback! The set up in this video was only temporary for testing, that's why it had so many leaks and whatnot. My most recent video (ruclips.net/video/PJCu0TNtPGs/видео.html) is a significantly improved version of the design, and I'm working on an even better version of the bubbler system right now, give that a watch if you're curious.
I'm not too concerned about the hexavalent chromium because from what I've read the use of distilled water significantly reduces the wear on the electrodes. I'm also reducing the wear on the electrodes with my neutral plates by dividing the 12v into 2-2.4v per plate. In a world where everything went how I wanted I'd probably use either titanium, or graphite as you suggested (initially I was looking for graphite for my electrodes, but I wasn't able to find a good source) but that stuff is quite expensive.
Thank you for the input on this, I definitely appreciate it!
i think the bolts over handing will cause a mild short circuit for the first few panels. also you need some lock washers under the butterfly nuts so they dont come loose. the bolts holding the panels are also too close to the electrode plates, i think an extra 1 inch around all plates may be better, it looks good though
Thanks!
Nice one man!!! have you considered using rubber tubing to store the gas then attaching the torch to the tube? I'm thinking this might allow you to have some level of consistent pressure...All the way From #RSA
Thanks! I haven't had any issues with the pressure since I updated my bubblers, she's working like a charm 🤟
I know that feeling, what it’s actually working (it’s not supposed to do that; yet)
Sir it super
Thanks my friend!!
look into flashback arrestors, inline tube type, some people make their own also using steel wool i think
Yep! I made one using an aquarium air stone!
Neally thanks for this education sir...
My question is why did u use steel for the plates? I thought aluminum was used...
I'm new to all this so if I asked a dumb dumb question I apologize now 😆
Next question is do u have anymore channels on RUclips? I love your creativity and I'd like to see more of your videos...
Sorry for taking so long to get back to you, but I used stainless because the electrolyte I used (KOH) is corrosive to aluminum. It would eat right through the plates within hours. And thank you! I appreciate it :)
What happen if not use the neutral plates?
Then the full 12v passes through each plate which speeds up the corrosion of the plates
I think you missed a few lessons on what a dry cell HHO machine really is. The plates as you have them arranged and wired are not correct, but you may have followed someone else who didn't understand the principles that make them work. As you laid them out, you will have electrolysis proper between the negative and the positive plates, and very little interaction from all of the other parallel plates, and virtually no voltage between them and the distant spacing of positive plates.
Nice brother
From India
Thanks man! ✌️
Can i speak with you brother? small doubt
Sure, we're speaking right now aren't we?
Where did you get the sheet metal from did you purchase it on the internet like eBay
I got it from Amazon, the link is in the description
You got me subscribing bro, now how about making a solar powered version with solar cells and a boost converter
I like that idea! I've been wanting to get more familiar with solar. Maybe I'll look into it in the summer!
@@Neally boost converters are cheap bro and they might excite the water here faster and making it more efficient, I am planning to make HHO myself and attaching solar cells to it, and in the future I even have ideas of putting it on an electric car, which makes it both solar and hydrogen powered
you should just the slayer exciter and resonate your energy flow from the earth
do you need a water pump to circulate the water?
It would help I think, but it mine works without it
Don't stay up too late and make sure you get your eggs and bacon
Of course! Can't go without the eggs and bacon😂
Looks exactly like the one for sale on Amazon
Cells are generally very similar so probably!
Shouldnt yer hydrogen b going into the bottom of the bubbler?
I routed it to the top to avoid foaming, the bubbler filled up with foam when I had the return gas below the waterline
You need to count 6 not 5, therefore 2 volts between plates , not 2.4.
Anode is +, not the cathode. And 5 neutral plates means 6 cells in series, not 5, so 12 / 6 = 2V per cell.
You have made little mistake. a hho cell with 5 neutral plate have 6 sector so it divide's driving voltage by 6 therefor here basic cell voltage is 12/6=2 volt. Your 19 plate hho generator content total 18 cell in 3 stake. Thanks and best regards
Ahh okay makes sense, thanks for clearing that up!!
Hho is so simple but mind blowing Technology prolonging engine life and engine oil life. And save lot of fuel if you have a carburetor type engine .
Hydrogen is most abundant element in the universe. Hydrogen is a zero emission fuel. Hho devise will decarbonise your car engine .hho kit can installed without any modifications in the car engines..
Engine life changer device improve engine performance and increase fuel burning efficiency beter then a new car!!! More fuel will burn in the engine No un burn fuel wastage . Engine will run more power full .
Engine runs smoother reducing carbon emissions significantly . Boost engine power and torique. Better acceleration . faster running.
An efficient hho car kit lower the engine temperature more then 100 degree F. To prevent heat build-up.Hho car kit reduce car maintenance charges.
Cleaner engine running. Reducing engine noise due to the faster fuel burning. Hho car kits works nicely requires no modifications in the car engine. No side effects on car engine.
Engine start quickly safe your car battery. No more petrol or diesel smell
make your car a low cost hy-brid. Use a Hho car kit small or big.
Hho kits for your car & bike save fuel and solve all the engine heating problems automatically. More engine power torque and acceleration engine runs cool clean and green. Environment friendly technology make your car quick start car ac will work more. Hho technology will prolonged engines and engines oil life. Less car mentences. Low octane fuel will burn like a high octane fuel. Your engine will burn 100% fuel in the engine no unburn fuel will wastage. Car will run clean, calm and quiet and like a new car. Best technology for the human health and happiness purpus HHO breathing machine. VERY simple and safe and easy technology, amazing recovery of human dieses like eye care,skin care, breathing shortness, parkinson and so many other dieses. Hydrogen rich water is best energy drink for human body health and happiness and for human beauty, for good sleep. Hydrogen gas is a powerful antioxidant detox our body. Reserach on hydrogen water is in the early stages so side effects are unknown. Or you can say so for no side effects. Hydrogen is 88 time smaller then vitamin c but richest in antioxidant. HHO technology best for our cars. I am sure nany persons would be benefit from our hho acmec videos. HHO kits are very simple but very useful for old cars engine efficiency and performance fuel saving and money saving and envernment control hydrogen on demand system zero carbon emissions. Kit can install without any modifications in your car engine. HHO kits are very useful for cars engine efficiency and performance and money saving.Please visit HHO acmec if you want more information abou hho technology call zafar 03082266179 karachi.
Tri spark plugs
why you call it dry when you use water???
I'm pretty sure it's called a dry cell because the electrolyte is contained within the cell, rather than the whole thing being submerged. Not 100% sure though, so take that with a grain of salt.
You are brilliant! You should create this to make it available to motorcycle's gasoline fuel replacement and sell them to Asian market, the biggest motorcycles market on earth. You will be the next Elon Musk, and you may be the next richest person in the world .
Thank you friend, I really appreciate it!🙏
hmm weird i asked few questions but it deleted!
What was your question?
@@Neally tnX man this was my questions
ive seen so many HHO from 2009~2013 after that everything's died down! the genuine questions i have is if this is good solution why not many people using it?
and no improvement or anything well thats a lie i saw with Graphite plates instead of stainless steel but only one time and no followup
lastly most power generators set either by psi or cc such as 420cc so how to calculate which size & LPM hho needed to make it run w.o stop underload etc...
anyway i hope someone help out this newbie
tnX for help in advance
To Neally
Why is it that we have the technology to change the world for a better place and
all the people from all walks just bitch and complain about it and do nothing.
What if you had the answer to fix the gas problem would you fix it.
What if you can run the power grid on just water, you can. I am not talking about
wind or solar nor hydro, just water and only water it can be done.
What if you can run a car for pennies with zero emission.You can and the
technology is there and free for the taking. For those who want this information
I will send it to you for free and for those who want to do nothing but
bitch and complain they need to wake up and start doing their part to FIX this
gas problem does anyone have a answer for the fix I do and the information
is FREE so who will step up for this who.This device was tested by BMW
1980 and patent was applied for and received a patent on this has [expired]
and is for the taking.I have been running my jeep for years with it and works great.
There are answers to replace oil. The countdown has begun to say goodbye to oil.
Mr.C. Future
Du bist so g u u u t !
🤟❤️
I was going to give you a thumbs up but then you did thar psychic attack message to me, so thumbs down.
Ah you've seen through my trap... 😂
Eh Eh Eh...what a huge joke,right? i mean,all that work for nothing ,right? what do you use it for? thanks
It wasn't for nothing, the thing works exactly how I wanted it to. Watch the latest video and you'll see what I mean