How to extend the SpaceX Starlink range and increase its internet speed. I've linked to this product in my Amazon shop: www.amazon.com/shop/jcristina Q: Does your internet drop or slow down in areas of your home or office? Q: Are you looking into a mesh network to help extend your Starlink signal? Q: Have you tried the method in this video to extend your coverage? Q: Have you seen a speed increase with a strong signal? It was fun to figure out how to boost Starlink wifi signal! Watch till the end and take a moment to add your thoughts or even simply an emoji to the comments so I know you were here! Are you looking for a Static IP address and the ability to do Port Forwarding? Get a massive discount with PureVPN by visiting jcristina.com/vpn Uses Promo Code: JCRISTINA for an additional 15% Off. As promised, here is a list of routers I'm currently recommending: Nighthawk: amzn.to/3DnOKqh TP-Link: amzn.to/3pQC6x3 ASUS: amzn.to/3OoaDw5 Don't forget to join my Newsletter: jcristina.com/join and grab one of my eBooks FREE just for being here: jcristina.com/books Super Chats And All Channel Donations Are Warmly Welcome! Thank You! Speedify.com get 20% OFF when using Promo Code: JCRISTINA at checkout or simply go to my direct link: jcristina.com/speed I truly hope you enjoy the video and find value in it! If so, please consider Thumbs Up, Subscribe, and Becoming A Member Of The Channel! For Media & Business Relations Contact 📧 jcristina.com/contact Thank you for supporting the channel! Are you interested in any products that I personally use? Visit www.amazon.com/shop/jcristina or go to the bottom of this description for direct links. If you would like to get a FREE copy of the Prologue to "How To Create A Digital Fort Knox - Backing Up Your Digital Life" or one of my other FREE books, visit jcristina.com/books Consider subscribing to the channel, commenting below, and signing up for my newsletter at jcristina.com/join Highlighted Starlink Hardware I Have Tested In The Past: Ubiquiti amzn.to/3qC554s NetGate amzn.to/3cXiTTv Peplink amzn.to/3OnTsHM UTT Router amzn.to/3nJBLaL TP-link Router #1 amzn.to/3IjkyhP TrendNET Router #1 amzn.to/3nVukx0 TrendNET Router #2 amzn.to/3IGxvm2 Small Battery Backup For Starlink - amzn.to/3ScbcrZ TP-link AC Router - amzn.to/3so07J1 TP-link AX Router - amzn.to/3sf2or8 TP-link Managed Switch: amzn.to/3EQJKZy TP-link Unmanaged Switch: amzn.to/3FVbaih TP-link Outdoor Access Point - amzn.to/3uqDYfP TP-link Indoor Access Point - amzn.to/3rV6Nzk TP-link Control Module (Gigabit) - amzn.to/3rVBqEx For High-Speed Access Points (e.g. Starlink or Cable) TP-Link Control Module (Gigabit) - amzn.to/3rVBqEx TP-Link AC1900 - amzn.to/3Q28y6N For Slower Speed Access Points (ex. ATT) TP-Link Control Module (100Mbps) - amzn.to/3Lduaf3 TP-Link AC1200 - amzn.to/3OLhlsK [ Social Media & Additional Connections ] 📦 20% Off Everything jcristina.com - Code YT20 🆓 FREE eBook jcristina.com/ebook 🌒 Dark Moon Teas DarkMoonTeas.com 🎬 RUclips - ruclips.net/user/jcristina 🔖 Twitter - twitter.com/JosephCristina 👀 Instagram - instagram.com/JosephCristina 👨💼 LinkedIn - www.linkedin.com/in/josephcristina 📖 Facebook - facebook.com/joseph.cristina 📰 Creative Discord Server - community.jcristina.com [ Equipment Used ] 💎 MB ] ASUS - PRIME X370-PRO ATX AM4 Motherboard - amzn.to/2rmR9LT 💎 CPU ] AMD - Ryzen 7 1700 3.0GHz 8-Core Processor - amzn.to/2pSCx4S 💎 COOLER ] Corsair Hydro H115i Extreme Liquid CPU Cooler - amzn.to/2rfEpJ2 💎 GPU ] MSI - GeForce GTX 1070 8GB Video Card - amzn.to/2rndQ2o 💎 RAM ] Corsair - Vengeance LPX 32GB (2 x 16GB) DDR4-3000 - amzn.to/2qo8PIv 💎 SSD ] Samsung - 850 EVO-Series 500GB 2.5" SSD - amzn.to/2rmXqH8 💎 DISPLAY ] Dell - UltraSharp 34” Curved Monitor - U3415W - amzn.to/2s6pvTs 💡 Video Lighting - amzn.to/2qrDOnH 🎬 Sony ZV-1 - amzn.to/3rFkfFj 🎬 Canon EOS R & Kit Lens - amzn.to/3lEZIC2 🎙 Tascam Mic w/Recorder - amzn.to/39Xb50C 🎙 Electro-Voice RE-20 - amzn.to/37SoBQt 🎙 Zoom H4n Recorder - amzn.to/3oyF2bh 🎙 dbx 286s Compressor - amzn.to/39SLTYY The above are my Amazon affiliate links - If you purchase anything using the links above, you're supporting this channel at no additional cost to you! I appreciate your support!
Thanks Joseph ... I bought the wall mount because it will be barely noticeable and I am confident it will solve various wifi weak signal problems here. I also had to buy a longer Cat8 Eth cable to simplify the setup, BUT ... cost? total is $28. And about 45 minutes of my time to get everything installed and tidy. Thanks for your great content.
Not a typical JCHRISTNA 5 star video, only 4 stars this time. I am not complaining, just leaving the feedback you need to know. You are still my top guy!
You are a brave soul - my wife would choke me out if I didn’t use a level to confirm placement before I nail/screw anything into a wall she could see😂 Hats off to you, another great video.
I just bought two Ver 3. from Spacex offer. They have 2 RJ-45 ports. One is a replacement for the Ver 2 and the other, a mesh unit for the barn. We shall see how this works.
I just received my long wall mount kit and when I opened it, I found that they sent me a used one. There was no cardboard in it like there was with the dish and the wall kit for the cable. The worst part is that I’m missing the screws and clips! I finally figured out how to send in a support ticket! It’s ridiculous that he doesn’t have a call-center! According to one of your earlier videos, I could be waiting up to two weeks. I’m going to take your advice and post every day to hopefully speed up the process. If the booklet had of listed the dimensions for the screws, I could just go to the hardware store and buy them.
Nice product demo. I used a third party mesh network from Netgear with SL in bypass mode. It's a few years old, but it does the job. Aside from clearing up some shelf space I don't see a use for this. Maybe when I build my data closet.😊
Actually, I ve had this since May and find that a single WiFi modem works fine, however I brought an additional modem to mesh and that also works very good the main router is in basement and projects fine through the floor on our small home 1000sq ft
We use deco axe5400 with a TP-Link 16 port unmanaged switch. We have a few of our points hardline and it does amazing. Set up is user friendly, practical sets itself up, this system was overkill, but it’s amazing and we can expand it as needed(cameras, NAS, Poe items). I put my starlink as high as we could before but now with the mesh system we are good to go. Definitely could have used that stand before the mesh system set up 😂
My starlink router is sitting near my window since I wanted my starlink around my backyard. Also I would recommend splitting the 2.4 GHz and 5 GHz network since there were parts of my house where 5 GHz can reach but my phone would just use 2.4 GHz instead.
So I have NETGEAR RBK753-100NAS AX4200 Orbi TriBand WiFi 6 Mesh. I run 3 satalites. The coverage is great, I litterally have coverage about a 7 acre radius around my house with no outside satalites. The issue i have had, is when trabsfering PC to PC or PC to server the back haul Is never advertised speeds of 600-800Mbps. It seems to always rest around 140Mbps.
I’m currently Deco mesh with 3 nodes on my boat. Right now I have no interest in increasing the WiFi speed to 6, 6+, or beyond as I have no devices that can handle those speeds ( will get a new iPad Pro in the spring). But even then, I’ll wait for the prices drop before changing the router.
Thanks for another great video JC. I assume doing the same thing with my mesh node will have the same results? We are in a 2400 sf home on two stories main router is on the main level and mesh node in the basement. I am thinking of getting two of these brackets to mount both up high.
Great video. Still debating on how to mount dishy. I currently have rigged up on deck. Considering going with the pole option connected to deck or the mount for the peak of the house and running cable through existing satellite dish hole. Only problem is how to run my cat cable. House is on steel beams and has insulation with black covering in between rafters. Ughhhh. Any ideas?? Thank you for the content
I have a tp-link ax11000 router and wanted better wifi around my house. I picked up a mesh system. I returned the mesh system, because my signal was marginally better in some areas and worse in others. My router sits high on an open shelf. I took my wifi extender from my garage and got about the same wifi as the mesh, but I was hoping for magic, I suppose.
Well, it appears my gen 1 router ethernet port quit. I think it's been going out all week since I've been having trouble. Starlink is sending me a new dish.
Can I use my new starlink router as a mesh network extender with my old starlink router? If yes how do I do that? I plugged in my new router and I can access it but I can’t figure out how to connect it to my old router
I have to ask. I have a few neighbours that are installing Starlink. Everyone that starts a new install or reinstall theirs causes me to receive a require to allow a mesh network. I say no to the message but those request can not be deleted nor is there an option to ensure I will not get another request.
I have a related question. My home has metal siding. I have plenty of signal everywhere inside, but it falls off dramatically outside (likely due to the metal siding). I have several old routers that I could use as point of access to extend my signal outside, but I live in a very cold climate. I live right on the US/CA border at 4,000' (1,220m) elv. Last winter we hit -36F (-38C), so ya it gets bitter cold here. Just sticking a router or any PoA device outside will likely not work long. Are there any other options for folks like me? I did try to find out if there is an option to just run an antenna outside, but did not come up with anything.
I use a TP-Link outdoor AP as seen in my video description which has worked over the course of a few hurricanes.. Not sure about the cold but I would not doubt they would work. You can also build a box / enclosure to keep the elements at bay.
Having slow connection issues slow speed when checking on Starlink app but get faster speeds when using any other speed testing site In the advanced settings on Starlink app in the debug section under status all the dots are green but 1 and it says ( slow earthnet lan link ) what does this mean. Are they referring to my switch that powers my outside WiFi antenna?
I’m wondering if the switch I installed for my other device is bad or could it be the wired connection. The router I have only has the 1 port so I had to buy the cable with an external port to connect to. Could this be why I’m getting a slow lan link connection
No Starlink router here but I’ve got a cellular router. I turned off WiFi and feed internet to a FireWalla firewall router that feeds two TP-Link access points in a mesh network. The FireWalla router allows me to block whole domains like cn, ng, in, and ru. It keeps a record of all uploads allowing me to block all the suspicious ones.
How to extend the SpaceX Starlink range and increase its internet speed.
I've linked to this product in my Amazon shop:
www.amazon.com/shop/jcristina
Q: Does your internet drop or slow down in areas of your home or office?
Q: Are you looking into a mesh network to help extend your Starlink signal?
Q: Have you tried the method in this video to extend your coverage?
Q: Have you seen a speed increase with a strong signal?
It was fun to figure out how to boost Starlink wifi signal!
Watch till the end and take a moment to add your thoughts or even simply an emoji to the comments so I know you were here!
Are you looking for a Static IP address and the ability to do Port Forwarding? Get a massive discount with PureVPN by visiting jcristina.com/vpn
Uses Promo Code: JCRISTINA for an additional 15% Off.
As promised, here is a list of routers I'm currently recommending:
Nighthawk: amzn.to/3DnOKqh
TP-Link: amzn.to/3pQC6x3
ASUS: amzn.to/3OoaDw5
Don't forget to join my Newsletter: jcristina.com/join and grab one of my eBooks FREE just for being here: jcristina.com/books
Super Chats And All Channel Donations Are Warmly Welcome! Thank You!
Speedify.com get 20% OFF when using Promo Code: JCRISTINA at checkout or simply go to my direct link: jcristina.com/speed
I truly hope you enjoy the video and find value in it! If so, please consider Thumbs Up, Subscribe, and Becoming A Member Of The Channel!
For Media & Business Relations Contact 📧 jcristina.com/contact
Thank you for supporting the channel!
Are you interested in any products that I personally use? Visit www.amazon.com/shop/jcristina or go to the bottom of this description for direct links.
If you would like to get a FREE copy of the Prologue to "How To Create A Digital Fort Knox - Backing Up Your Digital Life" or one of my other FREE books, visit jcristina.com/books
Consider subscribing to the channel, commenting below, and signing up for my newsletter at jcristina.com/join
Highlighted Starlink Hardware I Have Tested In The Past:
Ubiquiti amzn.to/3qC554s
NetGate amzn.to/3cXiTTv
Peplink amzn.to/3OnTsHM
UTT Router amzn.to/3nJBLaL
TP-link Router #1 amzn.to/3IjkyhP
TrendNET Router #1 amzn.to/3nVukx0
TrendNET Router #2 amzn.to/3IGxvm2
Small Battery Backup For Starlink - amzn.to/3ScbcrZ
TP-link AC Router - amzn.to/3so07J1
TP-link AX Router - amzn.to/3sf2or8
TP-link Managed Switch: amzn.to/3EQJKZy
TP-link Unmanaged Switch: amzn.to/3FVbaih
TP-link Outdoor Access Point - amzn.to/3uqDYfP
TP-link Indoor Access Point - amzn.to/3rV6Nzk
TP-link Control Module (Gigabit) - amzn.to/3rVBqEx
For High-Speed Access Points (e.g. Starlink or Cable)
TP-Link Control Module (Gigabit) - amzn.to/3rVBqEx
TP-Link AC1900 - amzn.to/3Q28y6N
For Slower Speed Access Points (ex. ATT)
TP-Link Control Module (100Mbps) - amzn.to/3Lduaf3
TP-Link AC1200 - amzn.to/3OLhlsK
[ Social Media & Additional Connections ]
📦 20% Off Everything jcristina.com - Code YT20
🆓 FREE eBook jcristina.com/ebook
🌒 Dark Moon Teas DarkMoonTeas.com
🎬 RUclips - ruclips.net/user/jcristina
🔖 Twitter - twitter.com/JosephCristina
👀 Instagram - instagram.com/JosephCristina
👨💼 LinkedIn - www.linkedin.com/in/josephcristina
📖 Facebook - facebook.com/joseph.cristina
📰 Creative Discord Server - community.jcristina.com
[ Equipment Used ]
💎 MB ] ASUS - PRIME X370-PRO ATX AM4 Motherboard - amzn.to/2rmR9LT
💎 CPU ] AMD - Ryzen 7 1700 3.0GHz 8-Core Processor - amzn.to/2pSCx4S
💎 COOLER ] Corsair Hydro H115i Extreme Liquid CPU Cooler - amzn.to/2rfEpJ2
💎 GPU ] MSI - GeForce GTX 1070 8GB Video Card - amzn.to/2rndQ2o
💎 RAM ] Corsair - Vengeance LPX 32GB (2 x 16GB) DDR4-3000 - amzn.to/2qo8PIv
💎 SSD ] Samsung - 850 EVO-Series 500GB 2.5" SSD - amzn.to/2rmXqH8
💎 DISPLAY ] Dell - UltraSharp 34” Curved Monitor - U3415W - amzn.to/2s6pvTs
💡 Video Lighting - amzn.to/2qrDOnH
🎬 Sony ZV-1 - amzn.to/3rFkfFj
🎬 Canon EOS R & Kit Lens - amzn.to/3lEZIC2
🎙 Tascam Mic w/Recorder - amzn.to/39Xb50C
🎙 Electro-Voice RE-20 - amzn.to/37SoBQt
🎙 Zoom H4n Recorder - amzn.to/3oyF2bh
🎙 dbx 286s Compressor - amzn.to/39SLTYY
The above are my Amazon affiliate links - If you purchase anything using the links above, you're supporting this channel at no additional cost to you! I appreciate your support!
Wavlink sir?
Thanks Joseph ... I bought the wall mount because it will be barely noticeable and I am confident it will solve various wifi weak signal problems here. I also had to buy a longer Cat8 Eth cable to simplify the setup, BUT ... cost? total is $28. And about 45 minutes of my time to get everything installed and tidy. Thanks for your great content.
Thank you for your support and simply being here.
This quickly became my favorite channel
Love you! ;)
I set up my wifi network like you showed in one of your videos early lest year. Works great for the house and several out buildings.
Fantastic. Thank you for that. So glad to be able to help.
Not a typical JCHRISTNA 5 star video, only 4 stars this time. I am not complaining, just leaving the feedback you need to know. You are still my top guy!
😂 truly appreciate it!!
You are a brave soul - my wife would choke me out if I didn’t use a level to confirm placement before I nail/screw anything into a wall she could see😂 Hats off to you, another great video.
😂 honestly. I can see within mm. Just too see how far off I was. Maybe I’ll put a level on it to see and take a picture of the phone. 🚀🚀🚀🚀
I just bought two Ver 3. from Spacex offer. They have 2 RJ-45 ports. One is a replacement for the Ver 2 and the other, a mesh unit for the barn. We shall see how this works.
Yes!
That's what i did.
Ended up getting 4 mesh nodes.
Sweet!
Same. Deco mesh
We have a large house though and it includes the in-law suite.😊
I just received my long wall mount kit and when I opened it, I found that they sent me a used one. There was no cardboard in it like there was with the dish and the wall kit for the cable. The worst part is that I’m missing the screws and clips! I finally figured out how to send in a support ticket! It’s ridiculous that he doesn’t have a call-center! According to one of your earlier videos, I could be waiting up to two weeks. I’m going to take your advice and post every day to hopefully speed up the process. If the booklet had of listed the dimensions for the screws, I could just go to the hardware store and buy them.
Nice product demo. I used a third party mesh network from Netgear with SL in bypass mode. It's a few years old, but it does the job. Aside from clearing up some shelf space I don't see a use for this. Maybe when I build my data closet.😊
Thanks I’m going to try that love your videos they’re always a lot of help
Glad to hear it! Thanks so much for your kind words!
@@jcristina Do you know where l would get a mount for gen 1.
Awesome channel. Great Patriot...🇺🇸✊
Much appreciated1 Blessings!
I use cheap directional flat panel antennas. In a cheap WiFi repeater. I supply Internet for 2 other cabins across the canyon 1/2 mile away.
Nice!
Ive got my sl router in bypass running deco mesh x95 setup bloody awesomeness
Sweet
Your room setup is really cool!
That’s very kind. Thank you.
Actually, I ve had this since May and find that a single WiFi modem works fine, however I brought an additional modem to mesh and that also works very good the main router is in basement and projects fine through the floor on our small home 1000sq ft
Fantastic.
We use deco axe5400 with a TP-Link 16 port unmanaged switch. We have a few of our points hardline and it does amazing. Set up is user friendly, practical sets itself up, this system was overkill, but it’s amazing and we can expand it as needed(cameras, NAS, Poe items).
I put my starlink as high as we could before but now with the mesh system we are good to go. Definitely could have used that stand before the mesh system set up 😂
If you are looking for better drywall anchors I recommend drywall toggles they hold more weight and won’t wear out like the torpedo style
My starlink router is sitting near my window since I wanted my starlink around my backyard. Also I would recommend splitting the 2.4 GHz and 5 GHz network since there were parts of my house where 5 GHz can reach but my phone would just use 2.4 GHz instead.
just bought a new phone. old was Samsung A11 2.4Ghz. new one id Samsung A25 now 5Ghz
So I have NETGEAR RBK753-100NAS AX4200 Orbi TriBand WiFi 6 Mesh. I run 3 satalites. The coverage is great, I litterally have coverage about a 7 acre radius around my house with no outside satalites. The issue i have had, is when trabsfering PC to PC or PC to server the back haul Is never advertised speeds of 600-800Mbps. It seems to always rest around 140Mbps.
I’m currently Deco mesh with 3 nodes on my boat. Right now I have no interest in increasing the WiFi speed to 6, 6+, or beyond as I have no devices that can handle those speeds ( will get a new iPad Pro in the spring). But even then, I’ll wait for the prices drop before changing the router.
Thanks for another great video JC. I assume doing the same thing with my mesh node will have the same results? We are in a 2400 sf home on two stories main router is on the main level and mesh node in the basement. I am thinking of getting two of these brackets to mount both up high.
Good ideas. Routers just work better for the most part like that.
Suprise suprise!! You rock!
Thanks for being here!!
You add a Deco mesh network :-) A way cheaper option than the single Starlink mesh router
Great video. Still debating on how to mount dishy. I currently have rigged up on deck. Considering going with the pole option connected to deck or the mount for the peak of the house and running cable through existing satellite dish hole. Only problem is how to run my cat cable. House is on steel beams and has insulation with black covering in between rafters. Ughhhh. Any ideas?? Thank you for the content
I'm the guy bro. thanks for the knowledge.
Thanks for being here.
I have a tp-link ax11000 router and wanted better wifi around my house. I picked up a mesh system. I returned the mesh system, because my signal was marginally better in some areas and worse in others. My router sits high on an open shelf. I took my wifi extender from my garage and got about the same wifi as the mesh, but I was hoping for magic, I suppose.
Extenders and Repeaters are the worst solution. An actually mesh network is the best and increase height of router and APs always helps too.
Well, it appears my gen 1 router ethernet port quit. I think it's been going out all week since I've been having trouble. Starlink is sending me a new dish.
Does Home Depot currently have the best price on Starlink equipment ? Any suggestions appreciated. Its presently selling at 599.00 👌🇺🇸
I believe they are $599 everywhere in the US.. That said, Canada has them "CHEAPER!"
Visit Canada or buy from canada
Can I use my new starlink router as a mesh network extender with my old starlink router? If yes how do I do that? I plugged in my new router and I can access it but I can’t figure out how to connect it to my old router
Yes
Near Athens Greece download 307Mbps upload 35. Download latency 43ms upload 32. 03.11.2024 8:35
👍🏻
Thanks!😅
Truly appreciate your support and kindness Alice! Blessings.
I use MikroTik 60ghz Wireless Wire Cube Pro 2gb/s @ 2km range
🚀🚀
I have to ask. I have a few neighbours that are installing Starlink. Everyone that starts a new install or reinstall theirs causes me to receive a require to allow a mesh network. I say no to the message but those request can not be deleted nor is there an option to ensure I will not get another request.
I have a related question. My home has metal siding. I have plenty of signal everywhere inside, but it falls off dramatically outside (likely due to the metal siding). I have several old routers that I could use as point of access to extend my signal outside, but I live in a very cold climate. I live right on the US/CA border at 4,000' (1,220m) elv. Last winter we hit -36F (-38C), so ya it gets bitter cold here. Just sticking a router or any PoA device outside will likely not work long. Are there any other options for folks like me? I did try to find out if there is an option to just run an antenna outside, but did not come up with anything.
I use a TP-Link outdoor AP as seen in my video description which has worked over the course of a few hurricanes.. Not sure about the cold but I would not doubt they would work. You can also build a box / enclosure to keep the elements at bay.
I have my satellite and main router in my barn. My house is 200ft away. How do I get better connection? Right now I get 2 bars maybe in my home.
Having slow connection issues slow speed when checking on Starlink app but get faster speeds when using any other speed testing site
In the advanced settings on Starlink app in the debug section under status all the dots are green but 1 and it says
( slow earthnet lan link ) what does this mean. Are they referring to my switch that powers my outside WiFi antenna?
I’m wondering if the switch I installed for my other device is bad or could it be the wired connection. The router I have only has the 1 port so I had to buy the cable with an external port to connect to. Could this be why I’m getting a slow lan link connection
No Starlink router here but I’ve got a cellular router. I turned off WiFi and feed internet to a FireWalla firewall router that feeds two TP-Link access points in a mesh network.
The FireWalla router allows me to block whole domains like cn, ng, in, and ru.
It keeps a record of all uploads allowing me to block all the suspicious ones.
Awesome!!!!!! Love it.
Hello, So the Starlink mesh router could be used as a main router in case the original router malfunction?
Yes
Yep.
Bob Villa can take a few lesson from you!! 😊👍🏽
😂
Followed up online and couldn't find a version for V3. Guess someone is working on one..?
V3 are for v1 users to upgrade to. V2 can not get the V3 router currently.
I have 2 of the v3 routers (that I upgraded to from v1) that I need to hang on the wall... @@jcristina
So had super slow speeds brought to Starlink attention they send new router from 10 mps to 150 mps
So my Telus phone is 451 mbs download why is my Starlink dedicated system so bad
Ranges suck in cement houses.
Only if they could make a long range Starlink router
WiFi 7
What about 6 acres doesn’t reach
Hello! The position of your lighting causes your cap to generate a shadow on your face that is too dark and makes your face look strange. greetings.
Thanks so much for that.. I'll keep that in mind in the future.
Starlink ping is not stable 😢
get a scan so we can 3d print it.
I don't have a method of doing that but for under $20... I think supporting the creator makes sense.
Starlink router is blah. Don’t use mine at all just use the pro dishy into wan 1 on my commercial router then use my own mesh.
It’s maybe fine for an apartment but I cover several buildings on several acres and yeah that’s not enough.
Are you setting your Starlink to bypass or do you have a gen 1 and plugging you cat cable from the dish directly into you third party router?
@@jcristina not using the router at all from Starlink. I’m right into the dish with the the-45
@@jcristina I’m running the high performance kit.
Wow starlight about 10 mbs that is pretty pathetic when are they going to step their game up
Hope soon.
20 minutes to tell us to raise our Starlink router, what a waste of time!
Let’s face it Starlink router is garbage so you buy their mesh system
Or use a third party instead.