I’m a big lectron fan, been around much longer than smart carb, found it funny in the little ad they said lectron has a needle, they were actually first to have the metering rod and self altitude adjusting, but if it works then it works😊
Encourage you to dig a little deeper on the history of the flat slide, metering rod carburetors developed and inspired by original inventor William "Red" Edmonston. He was responsible for both the original Lectron and the SmartCarb decades later, with multiple designs in between including the Ei Blue Magnum, QwikSilvers I and II, AFT HVV. In fact the Lectron wasn't even his first metering rod carburetor, but it was the first flat slide version. The SmartCarb was the culmination of many years of his life's work and we were fortunate to have worked with him in his final years and have continued its development ever since. Where it differs from the Lectron is in the use of integrated float bowl venting allowing the use of a true single circuit design (no power jets), no external vent lines, and no fuel spillage. SmartCarbs are also externally adjustable without tools whereas the Lectron requires slide removal to adjust the metering rod. You might check out the article on our site called SmartCarb vs Lectron. It explains the shared history of both fuel systems and how they differ.
@@SmartCarbFuelSystems I checked it out but something that still rubs wrong is in you’re ad, you straight up compare the smart carb having a metering rod and lectron having a needle, that’s wrong but sounds like you know that, not sure why put that in the ad, also adjusting the metering rod on a lectron should rarely even be done, never touched it on mine, 5years with it no problems in multiple high and low altitudes, but none the less William was a genius but I guess for me the only difference between the 2 that I can compare is the float bowl/non spilling on the smart carb
@@KORR805 which ad are you referring to? We have not, would not, and do not call the Lectron's metering rod a needle. If you have a chance to throw a leg over a SmartCarb equipped bike, we encourage you to do so. It really is on a different level.
@@KORR805 none of the content in this video is ours. At one point a Chaos Causes clip is used and that may be what you're referring to but we don't think Justin mentioned the word needle in reference to the Lectron, but rather conventional jet/needle carbs more generally. Either way we certainly understand the difference between a metering rod and a needle and have taken care to compare/contrast our fuel system with the Lectron in objective terms.
Man watched all ur vids but u got so many bikes what size motor in that elite? And i enjoy ur vids no matter its building riding or updates we stay mobbin my guy!!! Not going to be a easy fix to the youtube problem just keep it up get that 100k plaque
Always great vids man, I’ve built a piaggio Zip with virtually same mods as your Malaguti F12. I just recently upgraded from a 21phbg to a phbl25 came with manifold and pod filter. It’s another level of power now man and it comes as a kit pretty much already jetted to suit. Getting hard to find but the Malossi part number is 1611009. Just the manifold to suit the minarelli
i wonder how a smart carb even on a mostly stock/ mild build af16/18 would do? mpg’s are an additional benefit with the smart carb people say too cuz it burns fuel cleaner. i can’t believe how much better it seems it did to improve your bike in this video!
Do u guys have piaggio zip 2 stoke in the USA. Because here in Holland we build them 70cc and there quick. Maybe good idee for next one! Much love from Holland!
RUclips Is probably flagging your group ride videos because of all the street takeover stuff in the news lately; likely some state or other government entity is putting pressure on RUclips over videos that they think would "encourage such behavior", and youtube is likely happy to oblige. That's my guess anyway. Hope you can resolve it. I'll order some merch soon to help you out. Good video!
Que increible esta!! seria un sueño armar una asi, pero en Argentina cuesta mucho conseguir piezas asi o directamente ni se consiguen, solo en el extranjero :( , felicitaciones tremendo laburo!
I stopped watching your videos for about 2 years was watching when you got the first moped did the 150 swap all the crazy stuff. Just got a 49cc bintelli beast I’m planning on doing a build on found your channel again and can I say holy crap you’ve done ALOT since then 😂 sorry I cut out for a little fam😂
Sorry bout the RUclips stupid-ass restrictions. I just went and bought a T-shirt from your merch shop to support you. More and more this RUclips BS is pushing me towards RUMBLE.
@@BOLO.808 i know bro! i’m just saying that it’s a new thing youtube is doing, just like tiktok. trust me i like the build vids more myself! i’d rather be working in garage than riding 99% of the time haha
Questions about driving on the road. Is it legal in your country to drive a tuned scooter on public roads. or is it illegal as it is for all of us in Denmark
try the metrakit pro race3 exhaust, loved that one way more than the arrow exhaust. same ish look. Nothing tops the DDL tuning exhaust tho ^^ (dutch brand)
@@MOPBOYZ both metrakit & ddl have a exhaust that will fit your 72cc. DDL will out perform any yasuni. And the metrakit one looks somewhat the same as the arrow one you got but wont crack. And prob a rare exhaust in US.😄
What model and where did you get your remote thermometer? Thanks in advance, I have a nh125 with some add ons that I would love to monitor that temp closer
What 50cc scooters should I stay away from? I got a cvt 4 wheeler I did all the work to and got that little bugger snapping . Just curious , want to pick one up cheap not running and do the same thing.
That was an awesome video the elite is so sweet, great to know that Smart Carbs are a great product and perform like they claim!!! YO You tube let the creators post all videos, it's everyone's right to free press!!!1
I’m just getting into two stroke scooters I never knew that two strokes don’t have valves so you don’t have to do valve clearance adjustments like on the grom every thousand miles which is super annoying not only that I was curious since you put oil in the gas do you still have to do oil changes I can’t really find anything online about it
Hey man, the yt BS is a forever struggle. Honestly I'd try putting a tile screen in the begining of every video stating, "Stunts preformed in this video were preformed by professionals, do not attempt to remake any stunts seen in this video'
i did that a few vids ago in the video where we “took over the island” sadly doesn’t work. youtube uses automated systems to determine these things now, it’s a bummer
hay just bought a scooter i got a question my scooter is so slow from the start and kind of has a vtec at 40 kmh but untill then its so slow what do i need to change ? and uhh yeah i topped out at 70 kmh now it tops at 60 kmh. do you have any idea what is the issue ?
Maybe, just maybe your scooter is a bit crashed. If it's the stock cylinder try upgrade it with a 70cc cylinder (there are even cheap ones for like 100€ that bring you decent power) but you need to re-jet your carb (7-10% bigger main jet should do the trick, jet numbers are on your jet, jet kits are like 10-20€) and definetly upgrade the stock cvt to a malossi multivar or a polini high speed (around 70-80€) That "vtec" kind of acceleration depends on your cylinder an exhaust setup. (Those big chambers on the 2stroke pipes need to fill with enough exhaust gases to prevent you exhaust port of pressing out unburnt fuel when the piston compresses your gas) Hope you could understand what i tried to explain :) if questions open just answer my comment bro :D your scooter should be fine once you make some adjustments or upgrade it :) it's not that hard i promise :)
Damm RUclips, as long as others not in danger. Come on let the boys ride. 🤙🏽ahh throw RUclips the Shaka. Ehh my bro come to Hawaii one day. Get some killah bikes down here bro.
Doing wheelies an stuff they do that don’t be surprised when you get tickets to come to court for breaking laws on the road they did it to braap vlogs like in 2018
it is when that’s what was on the bike lol. the video isn’t called comparing carbs to smart carbs. it’s putting a smart carb on my elite, which we had to take off the old carb
youtube will monetize animal abuse videos and liveleak style videos with “made for youtube kids” in the description but god forbid you drive a moped at 25mph
do you usually like to watch men with no socks or how do you prefer guys to dress for you LMAOOO. you care more about how a guy dresses than you do the scooter then you have other interests in your mind my man
we call the honda elite honda vision over here in the netherlands easy to get tuned like those things
Those centreline wheels are perfect 👌🤤 this is my favourite build of yours, always heen a big fan of the purple🔥💯
i love this thing! thanks man
I’m a big lectron fan, been around much longer than smart carb, found it funny in the little ad they said lectron has a needle, they were actually first to have the metering rod and self altitude adjusting, but if it works then it works😊
Encourage you to dig a little deeper on the history of the flat slide, metering rod carburetors developed and inspired by original inventor William "Red" Edmonston. He was responsible for both the original Lectron and the SmartCarb decades later, with multiple designs in between including the Ei Blue Magnum, QwikSilvers I and II, AFT HVV. In fact the Lectron wasn't even his first metering rod carburetor, but it was the first flat slide version. The SmartCarb was the culmination of many years of his life's work and we were fortunate to have worked with him in his final years and have continued its development ever since. Where it differs from the Lectron is in the use of integrated float bowl venting allowing the use of a true single circuit design (no power jets), no external vent lines, and no fuel spillage. SmartCarbs are also externally adjustable without tools whereas the Lectron requires slide removal to adjust the metering rod. You might check out the article on our site called SmartCarb vs Lectron. It explains the shared history of both fuel systems and how they differ.
@@SmartCarbFuelSystems I checked it out but something that still rubs wrong is in you’re ad, you straight up compare the smart carb having a metering rod and lectron having a needle, that’s wrong but sounds like you know that, not sure why put that in the ad, also adjusting the metering rod on a lectron should rarely even be done, never touched it on mine, 5years with it no problems in multiple high and low altitudes, but none the less William was a genius but I guess for me the only difference between the 2 that I can compare is the float bowl/non spilling on the smart carb
@@KORR805 which ad are you referring to? We have not, would not, and do not call the Lectron's metering rod a needle.
If you have a chance to throw a leg over a SmartCarb equipped bike, we encourage you to do so. It really is on a different level.
@@KORR805 none of the content in this video is ours. At one point a Chaos Causes clip is used and that may be what you're referring to but we don't think Justin mentioned the word needle in reference to the Lectron, but rather conventional jet/needle carbs more generally. Either way we certainly understand the difference between a metering rod and a needle and have taken care to compare/contrast our fuel system with the Lectron in objective terms.
Man watched all ur vids but u got so many bikes what size motor in that elite? And i enjoy ur vids no matter its building riding or updates we stay mobbin my guy!!! Not going to be a easy fix to the youtube problem just keep it up get that 100k plaque
thank you my man. this elite has 72cc corsa with malossi crank!
You should compare the smart carb to one of those lectron mini carbs. Similar idea but a little bit smaller profile carb.
Love to c the old elite out. Can't wait for the rest to get done. Bigger pipe Yes. Old man mop
🤘🏼🤘🏼
@@MOPBOYZ love my new stickers. Great quality. 👍
Always great vids man, I’ve built a piaggio Zip with virtually same mods as your Malaguti F12.
I just recently upgraded from a 21phbg to a phbl25 came with manifold and pod filter. It’s another level of power now man and it comes as a kit pretty much already jetted to suit. Getting hard to find but the Malossi part number is 1611009. Just the manifold to suit the minarelli
do you premix? wanna install one of these on my tgb
U should try do a top speed run with it like how chuck did with his 114cc build
i wonder how a smart carb even on a mostly stock/ mild build af16/18 would do? mpg’s are an additional benefit with the smart carb people say too cuz it burns fuel cleaner. i can’t believe how much better it seems it did to improve your bike in this video!
Do u guys have piaggio zip 2 stoke in the USA. Because here in Holland we build them 70cc and there quick. Maybe good idee for next one! Much love from Holland!
Just built one, im from the uk man. Love zips and roxs.
I’m in the UK and have a 2001 Zip 50, how good would those Smart Carbs be for the 70 conversions?
Hoi. In the US we didnt get the zip. There are some bikes here with the piaggio hiper2 like the typhoon and some derbis.
RUclips Is probably flagging your group ride videos because of all the street takeover stuff in the news lately; likely some state or other government entity is putting pressure on RUclips over videos that they think would "encourage such behavior", and youtube is likely happy to oblige. That's my guess anyway. Hope you can resolve it. I'll order some merch soon to help you out. Good video!
Que increible esta!! seria un sueño armar una asi, pero en Argentina cuesta mucho conseguir piezas asi o directamente ni se consiguen, solo en el extranjero :( , felicitaciones tremendo laburo!
I have a TWH Adjustable on my elite, it's offset as well, and it's pretty nice for the price, comparable to the NCY
Yes sir.. That smart carb is smart af haha 👌
I stopped watching your videos for about 2 years was watching when you got the first moped did the 150 swap all the crazy stuff. Just got a 49cc bintelli beast I’m planning on doing a build on found your channel again and can I say holy crap you’ve done ALOT since then 😂 sorry I cut out for a little fam😂
We need to see a Piaggio Zip build! 💪🏻
i wish
Would you buy a frame from the UK? I could ship my spare over to you?
Nah a typhoon would be better
@@kylechupick2232Nope
@kylechupick2232 Yeah for real. Much better looking tk
Sorry bout the RUclips stupid-ass restrictions. I just went and bought a T-shirt from your merch shop to support you. More and more this RUclips BS is pushing me towards RUMBLE.
thanks for supporting homie🤙🏼 yea i been looking into possibly starting on rumble
Where did you find the body panels and floor panels at Bean looking forever?
Think this would work on a Honda gx200 ? That would be cool !! Has a big valve head and would like a 28mm carb .
My guy carb killer, takes the fun out of tuning. Lmk I’ll give you a driveline setup and porting 80s class for 72zz 🤙🏽
cant wait for a prebug vid
same
I just to be a 2stroke scooter guy, now I play with the four strokes
U don’t pull views on riding videos because 99% of your subs are for the fixing/ modding moped videos
they also restrict them and demonetize anything with wheelies now for “dangerous acts”
honestly thats why i subbed. i love the dyi moped vids and they are super helpful
By no means was I tryna hate @MOPBOYZ I love your videos I’m just being honest
@@BOLO.808 i know bro! i’m just saying that it’s a new thing youtube is doing, just like tiktok. trust me i like the build vids more myself! i’d rather be working in garage than riding 99% of the time haha
Any of the mopboy videos are dooope.
Which metering rod do you use in the Smartcarb carburettor?
Questions about driving on the road.
Is it legal in your country to drive a tuned scooter on public roads. or is it illegal as it is for all of us in Denmark
We want to see the modification, how its done, and the test afterwards....dont listen to guys that say riding vids dont get views😊😅
fun video idee put one of those small scooter turbos on one of the mopeds
turbo doesn't work on a small 2 stroke
You should do a pgo big max build
You mentioned temperatures, is 300° the sweet spot for carbed scooters? I run the same gauge on my Honda Navi and it stays around the 290/310° range.
for air cooled yes
try the metrakit pro race3 exhaust, loved that one way more than the arrow exhaust. same ish look. Nothing tops the DDL tuning exhaust tho ^^ (dutch brand)
for an elite?!
@@MOPBOYZ both metrakit & ddl have a exhaust that will fit your 72cc. DDL will out perform any yasuni. And the metrakit one looks somewhat the same as the arrow one you got but wont crack. And prob a rare exhaust in US.😄
yea must be impossible to get here cause i can’t find it anywhere only for am6 engine
Does the smart carb clear the plastic without trimming it or did you only have to do that to run the straight air filter ?
$700 CARB WOW 😵😵😵
I know
Order a Draggy they're Killer
What model and where did you get your remote thermometer? Thanks in advance, I have a nh125 with some add ons that I would love to monitor that temp closer
How about the fuel consumption sir?
What is that in the background at 1:48. Is that a Honda MB50/MB80?
What 50cc scooters should I stay away from? I got a cvt 4 wheeler I did all the work to and got that little bugger snapping . Just curious , want to pick one up cheap not running and do the same thing.
That was an awesome video the elite is so sweet, great to know that Smart Carbs are a great product and perform like they claim!!! YO You tube let the creators post all videos, it's everyone's right to free press!!!1
Ur scooters are quick
very fun haha
@MOPBOYZ how do u get them to run like that the throttle response is like a motocross bike
sick scooter bro, commented just for the algorithm
you the man
I had a Jdm spec tact 1988
What about a crazy goped build ?
i had a goped but sold it , those things are sketchy haha
def time for a new clutch
Is there any easy way to get the clear signals? Seems impossible to find online..
One of the guys I saw on here puts a disclaimer at the beginning of his videos claiming it's ai generated to prevent flagging for street violation
i tried that too, but it didn’t work for me
Диностенд -- отдельная наука, в которую входят различные способы корректировки его показаний. 🙂
we want to see a gilera runner build
same
I’m just getting into two stroke scooters I never knew that two strokes don’t have valves so you don’t have to do valve clearance adjustments like on the grom every thousand miles which is super annoying not only that I was curious since you put oil in the gas do you still have to do oil changes I can’t really find anything online about it
2 strokes don’t have engine oil. just oil in gas & gear box oil
@@MOPBOYZ oh ok gear box oil thanks man
Yo i need to set up my derbi Atlantis do you have any config for me ?
I would like to have a scooter like that
I’m looking for something
Reliable
Cheap
Easy to mod and still be lowkey so I don’t get pulled over
What you gurus got for me
honda elite af16!
dog you need the white led headlight swap homie
I gather you are running premix? If so what ratio please
32:1
change the block to 57mm
what rims r those on the elite??????
Great vid as per, but flaky claims about being "supervised by local authorities".
Hey man, the yt BS is a forever struggle. Honestly I'd try putting a tile screen in the begining of every video stating,
"Stunts preformed in this video were preformed by professionals, do not attempt to remake any stunts seen in this video'
i did that a few vids ago in the video where we “took over the island” sadly doesn’t work. youtube uses automated systems to determine these things now, it’s a bummer
You don’t feel the changeover from pilot to main, since they don’t exist. 🎉
magical lil thing
hay just bought a scooter i got a question my scooter is so slow from the start and kind of has a vtec at 40 kmh but untill then its so slow what do i need to change ? and uhh yeah i topped out at 70 kmh now it tops at 60 kmh. do you have any idea what is the issue ?
Maybe, just maybe your scooter is a bit crashed. If it's the stock cylinder try upgrade it with a 70cc cylinder (there are even cheap ones for like 100€ that bring you decent power) but you need to re-jet your carb (7-10% bigger main jet should do the trick, jet numbers are on your jet, jet kits are like 10-20€) and definetly upgrade the stock cvt to a malossi multivar or a polini high speed (around 70-80€)
That "vtec" kind of acceleration depends on your cylinder an exhaust setup. (Those big chambers on the 2stroke pipes need to fill with enough exhaust gases to prevent you exhaust port of pressing out unburnt fuel when the piston compresses your gas)
Hope you could understand what i tried to explain :) if questions open just answer my comment bro :D your scooter should be fine once you make some adjustments or upgrade it :) it's not that hard i promise :)
@@SmokingRider thank you by any chances do you know how many bolt patern there is for the heads since a bws sport head doesnt fit on my head its odd
100cc 2fast next?
👀👀
"and it sounds pretty crispy" lmfaooo
super crispy
Should I get a prebug or elite
prebug
love ur vids mam
thanks dude 🤙🏼
I want a moped but ill just save up for a 125cc
And u will be slower than 2t scooter😂
Is it still oil injected with the smart carb?
no i always delete oil injection. straight to premix!
Is the cyl/piston still stock 50cc?
72cc
That’s the one I owned 😢😢I miss her
How do I make my zuma tourqey I’ve done clutch rollers clutch spring cp21 carb
proper cvt tuning & 70cc kit of course
it's so expensive to buy with my currency, a genuine BRT PWK 28 cost RM300, the SmartCarb would cost RM2K without shipping :(
It's a pocket rocket. Is this a slide carb? The price is too steep -$ 650-700 on the website.
Where do we get that exhaust from
link in description for the website
@@MOPBOYZoh thank U!! Btw do y'all got a video on what mods I should run for my 100cc mopped? It's a Suzuki
I was wondering where the ferry 2 ferry video was. Funk you youtube
i’ll post it soon regardless
耗油大吗？
Sick scooter
Please provide the best
Top speed?
75mph
Literally sounds like a leaf blower. Would be so much better with gears!
it already has 8:1 gears
Less go 💪🏻
🤘🏼
Maybe you could create a second channel to fix your issue not getting clicks in videos in which you drive a lot.
The wounds have healed
4 lectron 40s on the bug😊
Do you have any scooters for sale?
everything’s always for sale for the right price
what're my options to choose from?
@@MOPBOYZ
we love you bby
🫶🏻
Built you shiny wagon
Damm RUclips, as long as others not in danger. Come on let the boys ride. 🤙🏽ahh throw RUclips the Shaka. Ehh my bro come to Hawaii one day. Get some killah bikes down here bro.
Say I thought I read small carb😢
Doing wheelies an stuff they do that don’t be surprised when you get tickets to come to court for breaking laws on the road they did it to braap vlogs like in 2018
i’ve gotten my tickets lol trust me
Comparing a poorly tuned Chinese carb with a tuned Smart carb is not a fair test.
it is when that’s what was on the bike lol. the video isn’t called comparing carbs to smart carbs. it’s putting a smart carb on my elite, which we had to take off the old carb
MAKE A SECOND CHANNEL JUST FOR RIDES
not a bad idea
Buy an yamaha aerox please. There are so fun please you wont regretted
i’m in america
You have to be on a [closed course by professionals] would probably help
tried this too. sadly doesn’t matter , they use an automated system to determine these things now, just like tiktok
Put a mukuni on it
Why?
Just do wheelies until they delete your channel😂
youtube will monetize animal abuse videos and liveleak style videos with “made for youtube kids” in the description but god forbid you drive a moped at 25mph
Dude i think efi is better 😅
shit costs more than the damn bike itself.
Had to stop watching when I seen flip flops and socks
do you usually like to watch men with no socks or how do you prefer guys to dress for you LMAOOO. you care more about how a guy dresses than you do the scooter then you have other interests in your mind my man
Looks slow AF and sounds like it's pulling way 2 many rpm's .. shees
3rd🙃
Yea u tube is turning into stupid fb/gay book lol