▼ 3D Scanning & Printing: Fixing a Vintage Audio Recorder ▼

▼ STORY ▼
Welcome to my channel! In this video, I'll take you through the process of restoring my 10-year-old audio recorder. When I decided to use it again, I discovered that the microphone protectors had deteriorated over time. Rather than throwing it away, I decided to give it a new lease on life with some modern technology.
First, I used my 3D scanner to create a digital model of the recorder. Then, using Fusion360, I designed new microphone protectors to replace the old, degraded ones. Finally, I printed the new parts using my 3D printer. The result is a fully functional audio recorder that's ready for many more years of use!
▼ USED PRODUCTS IN THIS VIDEO ▼
Creality CR Scan Ferret
Fusion 360 software
a broken ATEM Mini Pro, that made the video look jiggy at only 12 FPS
▼ TIMESTAMPS ▼
▼ WATCH MY FREE WEBSITE HERE ▼
3d-printcreato...
▼ SOCIALS ▼
Subscribe to RUclips: subscribe.3d-pr...
Facebook: / 3dprintcreator
Instagram: / 3dprintcreator
Twitter - X: / brian_3dpc
▼ FAVOTITE LASER ENGRAVERS ▼
- Algolaser Alpha 24 Watt gozbx.com/r/ok...
- Algolaser Delta 24 Watt gozbx.com/r/KK...
- Longer Laser B1 30W shareasale.com...
- Longer RAY5 20W shareasale.com...
- Two Trees TS2 20W shareasale.com...
- Comgrow Laser Engravers shareasale.com...
▼ TOOLS FOR LASER ENGRAVING ▼
- Honeycomb 500x500mm shareasale.com...
- Honeycomb 300x200mm shareasale.com...
- Camera for Lightburn shareasale.com...
▼ FAVORITE 3D PRINTERS ▼
- Longer LK4 and LK5 Pro 3D Printers shareasale.com...
- Longer 4K Mono Resin Printer shareasale.com...
- Sovol 3D Printers shareasale.com...
- Ankermake M5C High Speed shareasale.com...
- Ankermake M5 Professional High speed shareasale.com...
- TwoTrees SK1 CoreXY Printer shareasale.com...
- TwoTrees SP5 CoreXY Printer shareasale.com...

[@Jeroen820115]

Good video

[@John-mc8sh]

Thanks, I want to play around with scanning but what to get, scanning small thing would be nice but can I also scan a statue on the street or a part of a old dooror gate in an old city to replicate with your type of scanner And what type is it? Greetings from nl

[@3dPrintCreator]

The scanner I have is the cr scan Ferret, and for objects that are about 8*8*8 cm (8cm cubed) up to the size of a human body, that's a pretty good scanner for a small budget.
When you go buy a scanner you must really check the specs and compare them with what you want to scan. For the things I do, the Ferret was the best choice because I can use my cellphone as a computer to do the scanning. This means I don't have to use it with a computer, which is also possible, and for me that was a must.
I am not over experienced with scanners, but I hear from many people that the Creality line of scanner are among the best for a small budget.
If you would like a scanner for small and big things, you could look for the cr scan otter. I have no experience with that scanner, but it's specs are better for very small things, while it's still possible to scan big things, even bigger than my scanner can. I don't know if it can be battery and phone operated though.

[@3dparts4u-allvisuals4u]

Good to see you back with improved studio lighting! Nice video.

[@3dPrintCreator]

Thanks so much... I am here to stay, I hope 🙂

[@user-jp1qt8ut3s]

Even ongerelateerd: ik wil een metalen plaat laten printen of frezen omdat het perfect haaks moet zijn, maar de prijzen zijn belachelijk (>€500). Weet jij waar ik dit het beste kan laten doen?

[@3dPrintCreator]

Je geeft heel weinig details, maar als het gaat om frezen en lasersnijden van metaal dan kun je in Amsterdam terecht bij Metaalwinkel op de Stekkenbergweg 6 in Zuid-Oost.
Als het om printen gaat, dan is het echt afhankelijk van de maat. De allegoedkoopste in metaalprinten is JLC3DP in China, maar transport gaat je een fortuin kosten als het om iets groots / zwaars gaat. In Nederland heb ik hier geen goed adres meer voor. Het bedrijf waar ik wel eens kwam voor metaal printen is failliet.
Of Topic: Als je een vraag stelt waar ik echt even in moet duiken om dingen op te zoeken, is het leuker als je dat niet anoniem doet.
Anyway. Succes, ik hoop dat ik je geholpen heb.

[@user-jp1qt8ut3s]

@@3dPrintCreator hoi, ik zal de volgende keer inloggen met mijn andere account. Ik heb inderdaad ook JLC geprobeerd. Bedankt voor de tip van het Amsterdamse bedrijf.

[@Kotdt1]

Great video

[@3dPrintCreator]

Thanks man.