I really like the way you started and ended. Your are crafty and kind to share these great ideas. May you be filled with more wisdom to progress to higher levels.
an awesome build and an excellent show case of your talents. I converted a non working under the counter wine cooler into a incubator and hatching room. Thanks again for the video, you've given me several ideas to use when I upscale my next build.
I think to increase hatch rate u shud not include fan in the termostat but instead u shud plug it directly so your fan is working all the time non stop to make temperature the same all sides inside
i recommend used digital timer switch..so when your forget to turn the eggs atleast you can set the time for how many minutes or hours you want it to turn on..but it just turns on only one set time
I really like the way you started and ended. Your are crafty and kind to share these great ideas. May you please make video showing 1000 eggs incubator/hatchery. Thank you for your selfless wisdom. Could include the source of your timer and thermostat
You should think about meshing your water revoir, that way you don't have accidental drowning. What I mean it put a 1/4 inch caging mesh over the top with a lip going all the way around so it can't be knocked off or slide around. This will allow the chicks that jump out to be able to walk around on it but not fall into the water.
I wanted to tap you on the shoulder and warn, "The chicks will jump out of those baskets, into the water bowl!" And then you were honest that some died, so that is the positive side.
What possible mechanisms should i put in place to make my egg turner from moving too fast. Iam using a wiper motor but my turner is too fast. Thanking you in advance.
How do you control humidity ? Is there any module that can do A if humidity is high or X when humidity is low ? I found a device that heats up the water and makes humidity to increase and just add a fun that brings air from outside to decrease humidity. I need a controller to control it though
Great job friend . I really appreciated your innovative work . Would you please tell me what kind of white board you have used for surrounding the frame? And what is the thickness ?
Sir interested ako s motor n ginamit mo s 1st video mo. . .any clue where i get it? Mukhang heavy duty kasi and can withstand heavg load for bigger capacity. Nice work sir salute.
Nasa 40% lang ba ang napisa sa sinalang na 32 fertile eggs?... 12 yung penoy plus 9 na dina nakasurvive after 18days of hatching. Sa 32 eggs 13 lang na hatch....ano kaya ang humidity sa loob ng incubator at mababa ang hatching rate nya.
Q bien loco e indicas si funciona o no veo q funciona bien te felicito una pregunta para escuadrar los marcos utilizas esas escudradoras aca en Ecuador nunca las e visto son caras o no ahhh... sigue adelante tus videos son muy buenos ..
I really like the way you started and ended. Your are crafty and kind to share these great ideas. May you be filled with more wisdom to progress to higher levels.
Sek, you are the best. This is a lot better than anything and with link to all the supplies needed you are a genious.
an awesome build and an excellent show case of your talents. I converted a non working under the counter wine cooler into a incubator and hatching room. Thanks again for the video, you've given me several ideas to use when I upscale my next build.
I think to increase hatch rate u shud not include fan in the termostat but instead u shud plug it directly so your fan is working all the time non stop to make temperature the same all sides inside
I think it should be that way ,👌
big thanks from India! my customer wanted a machine to hatch eggs and this is the best idea! once again a big thanks bro! you gave life!
Haha lol
I like how you made simple the motor turning system it has been my main challenge in doing a low cost automatic turning machine. Awesome
A linear actuator with a timer to tilt the egg tray every 8 to 12 hours would be sweet. Great video, thanks.
i recommend used digital timer switch..so when your forget to turn the eggs atleast you can set the time for how many minutes or hours you want it to turn on..but it just turns on only one set time
what do u prefer 12v or 220 v digital timer ?
it is great please can you tell me how can wiring up all the bulbs, heater, funs and bulbs
I really like the way you started and ended. Your are crafty and kind to share these great ideas. May you please make video showing 1000 eggs incubator/hatchery. Thank you for your selfless wisdom. Could include the source of your timer and thermostat
Very well done for the construction .. Takes skills.
You should think about meshing your water revoir, that way you don't have accidental drowning. What I mean it put a 1/4 inch caging mesh over the top with a lip going all the way around so it can't be knocked off or slide around. This will allow the chicks that jump out to be able to walk around on it but not fall into the water.
metal ba yang tubular? or aluminum yung frame mo sa box
I wanted to tap you on the shoulder and warn, "The chicks will jump out of those baskets, into the water bowl!" And then you were honest that some died, so that is the positive side.
bro mgkno 1000setter auto sa inyo at 500 hatcher?ty
Well done for your tutorial but you are very fast. please may l know the sizes of the flat bar driving the egg turner.
Great job ,just few modifications required.
What are the modifications ?
Sir ask ko lang po saan kayo naka bile ng omron tempreature controller nyo?
What possible mechanisms should i put in place to make my egg turner from moving too fast. Iam using a wiper motor but my turner is too fast. Thanking you in advance.
If your wiper motor is 12v use 9v and down.
Thank you so much for the quick response. I am very grateful. I am actually using 9 volts on a 12 volt wiper motor.
Timer....flip -stop 2hrs....flip stop....a switch on both ends will do this.
You can use a microwave turning motor is better.
N Msellem Thank you so much. You guys are handy and resourceful.
Parabéns meu amigo, você é o melhor.
Um forte abraço desse seu admirador aqui do Brasil.
This is mm first time adding comment on RUclips I liked your egg incubator very good I need to here from you
Gracias por enseñarnos tu sabiduría
I like the video very much send more videos thanks
Sir pwede kuba malaman anu gamit mo timer or what kind you used timer I see at the top of incubator complete set... Thanks
Sir saan po ba ang direction ng hangin sa fan, sa ibaba ba o sa itaas
Thanks for sharing great videos. Where do get that green egg tray ?
How do you control humidity ? Is there any module that can do A if humidity is high or X when humidity is low ?
I found a device that heats up the water and makes humidity to increase and just add a fun that brings air from outside to decrease humidity. I need a controller to control it though
Hindi accurate yng thermostat ko at thermometer ano po b ang ggwin ko alin s dlwa ang susundin ko?
very well done, brilliant idea😍
Appreciated if there's anyone whos watching right can tell me how effective this type of incubator and hatcher.. please
Ganda bro. parang magandang gawing negosyo yan ahh.
Great job,can i get the copy of wireng diagram?sir
Sir, can I order for a 200-250 egg capacity incubator?
Great job friend . I really appreciated your innovative work . Would you please tell me what kind of white board you have used for surrounding the frame? And what is the thickness ?
1/4 hardieflex
Magkano at anung size sa ginawa mo na incubator
what is the best temperature for it?
Doesn't eggs have to rotate constantly?
They have to be rotate 5 to 6 a day
@@SekAustria thank you for feedback
What is the dimensions of the structure ?
Boss I think u forgot to put the ventilator holes.without it humidity level increase repidly
Where I can get the exact dimensions bro .
Boss anung klaseng playwood ginamit mo?
nice video very easy to make it at home everyone can do it, thank u for giving idea
Chala bagundhi anna
Hi sir.. can u share the dimensions/details of ur design sir? Really impressive.. ty
boss sek ano name ng switch na ginamit mo para e manually turn yong rollers ? pwedi ba malaman ? thanks
can i buy it? if the capacity is 500 eggs, how much is the price? can it not be sent to Indonesia?
Syamsul Bin Muhammad gak bisa 😂
any update in this project?
Hi
Can please tell me where can I order plastic eggs holder and 12v motor
Sir magtatanong po pano po kapag meron 1st batch na egg na nakasalang tapos after 2weeks magsasalang ulit ng itlog pede ga po yun?
Sir ano po tawag dun sa square tube steel na ginamit mo pang frame? May stopper po ba yan para dun sa hardiflex na board pag kinabit? Thanks sir
1x1 tubular. Wala pa siyang stopper lalagyan mopa kahit madalang lang
thanks po sa info and idea sir, mga magkano po nagastos nyo in total sir?
Roughly 3-4k.
Sir pwede ba mabili ng gawa na, at magkano po pati hatcher
Why didn't you cover water basin with plastic gauze
What is the humidity in 19-21 days
Nice egg!
Excellent information!!!
Boss san kayu nakakabili ng pyesa nito kagaya ng thermostat
Tnx po sa video 🙂
How to buy a incubator...and how much...
No podrías hacer un Video de El cableado? Que no vi como conectaste toda la caja de arriba
boss, magkano mag p gawa ng automatic incubator?
Hermano que material usaste para poner en los lados ?
awesomeness worok.. very nice...... I like.. goooooooood work.... man..👌👌👌👍👍
boss san mo nabili yung motor na low rpm?
So good
What is work of water in in inquibetor
To humidify the eggs thereby preventing from becoming hard, hence making it easy for the chicks to come out when hatching.
Ooo very good how many this incubater and wher are you from
Excellent video and work with precision if u live in Pakistan I will must purchase it or give you 10k Incubator order to make.
Verry good
Pwede bng magorder ng png 300 eggs lng magkano kaya sr.
Can someone tell me , bulb on top is better or on bottom?
Sir, was that for sale? How much will it cost me to buy that one? Was it also good for quail eggs? Thank you
Nice one sir.. How much all ïn all expenses? Need to make this for up coming breeding
what name the thermostat?
What is the used of the timer
To switch on the motor which turn the eggs.
Bro digame como se llaman los conponentes electricos para conprarlos.
Really great job buddy!
Sir can i know the dimension?
Great job buddy! :)
Thanks buddy
Mag kano Bos 250 load encovetor m
How to order?
What kind of bulb?
Hello my friends, I have a question.
Eska price kitna hain.
Thank you very nice job
Sir motter concet pees how lenth
Good day! Can I order that 500 egg DIY incubator with automatic turner? How much? Thank you.
sir bag bibinta kba nya ? mag kanu ganyan kalaki..nasa cebu ako..
Is the turning automatic?
Sooo nice bro.what is price ?
Fantastic job, dude! Really nice! 😃
Thanks dude :D
good day boss. san po nakakascore ng synchronus motor
San po area nyu
You aced it.
How much price 500 capacity incubetor
I need to talk to you . I need some of those incubator.
How much
Sir interested ako s motor n ginamit mo s 1st video mo. . .any clue where i get it? Mukhang heavy duty kasi and can withstand heavg load for bigger capacity. Nice work sir salute.
Ask lang Sir kung yung fan is hindi ba sya masisira kc continues ang ikot nya for whole 18days? New subscriber po, thank you
Nasa 40% lang ba ang napisa sa sinalang na 32 fertile eggs?... 12 yung penoy plus 9 na dina nakasurvive after 18days of hatching. Sa 32 eggs 13 lang na hatch....ano kaya ang humidity sa loob ng incubator at mababa ang hatching rate nya.
Como ago para asemeja una de esas
Did you buy or make the frame for the timer and others?
I built it
@@SekAustria sir can you give me your contact details please thanks
@@SekAustria I am very interested egg incubator
boss ang size ng flat bar na ginamit ko sa holder ng synchronous motor?
1inch lapad 3/16kapal
Hindi boss ung mas malapad ung nirivets mo..
2 inch yun bro 3/16 din ang kapal
Boss ano pla gamit mong synchronous motor?
Q bien loco e indicas si funciona o no veo q funciona bien te felicito una pregunta para escuadrar los marcos utilizas esas escudradoras aca en Ecuador nunca las e visto son caras o no ahhh... sigue adelante tus videos son muy buenos ..
W
1 dead badly
Hi did you have the turning on for all 18 days?