Je suis heureux que la vidéo vous ait été utile. Merci pour votre attention❤️🫶🏻 I'm glad the video was helpful to you. thank you for your attention❤️🫶🏻
After taking the measurements of the motor arm,.then you fixed it in the final stage. On what basis did you choose the appropriate height for mounting the motor? How can I calculate the appropriate height for mounting the motor?
After measuring and fixing the motor arm, we fix the motor in a place aligned with the hole on the rocker on the body of the device and place the arm and the rocker at a position of 180 degrees and make the second arm based on the distance between the two.
Of course , my good friend, according to the types of gears and the power of engines, each one has different specifications, and by calculating the weight and exact number of each floor, the power required in the machine is calculated and the engine is purchased based on that. The ideal RPM is 1-2/5 rpm.
جزكم الله خيرا رغم كثرة الفيديوهات المنتشرة في النت هذا فقط يدل على الاحترافية والمهنية والعلمية والدقة في العمل بل ظننت بسبب بعض مشاكل التصميم عندي انها لا تصلح وكل المنشورات خداع ومحاولات فاشلة من اجل كثرة المشاهدات لا غير
@@DRILLSHOW Could you help me to control pt100 and the 3D heating by stm32f1 or arduino? I have followed the source on some websites but it couldn't active.
@@cc2e53 Unfortunately, I have no experience in this field. But more sensitive sensors such as SHT series and ds18b20 are needed for the incubator. Be careful in choosing the sensor and accuracy range.
Vous avez vraiment résolu mon problème,mes sincères remerciements.merci❤
Je suis heureux que la vidéo vous ait été utile. Merci pour votre attention❤️🫶🏻
I'm glad the video was helpful to you. thank you for your attention❤️🫶🏻
Pretty good!!
Svp ce moteur de retournement peut supporter au maximum combien d'oeufs
Every swing incubator needs a timer that control's the motor or it differs with the motor?
@@PercyShakwane-do5nyof course you need timer how ever your motor RPM be down.
@@DRILLSHOW any type of timer will be fine because my motor RPM is 12/15?
@@PercyShakwane-do5ny repeating timer is the best👌
After taking the measurements of the motor arm,.then you fixed it in the final stage. On what basis did you choose the appropriate height for mounting the motor? How can I calculate the appropriate height for mounting the motor?
After measuring and fixing the motor arm, we fix the motor in a place aligned with the hole on the rocker on the body of the device and place the arm and the rocker at a position of 180 degrees and make the second arm based on the distance between the two.
Svp c'est un moteur a double tension ?
Please indicate the motor specification & the calpacity of weight to make it turn. Thank you in advance.
Of course , my good friend, according to the types of gears and the power of engines, each one has different specifications, and by calculating the weight and exact number of each floor, the power required in the machine is calculated and the engine is purchased based on that. The ideal RPM is 1-2/5 rpm.
Nice job
that’s kind of you dear ❤️🫶🏻
Excellent
❤️❤️🙏🏻
جزكم الله خيرا رغم كثرة الفيديوهات المنتشرة في النت هذا فقط يدل على الاحترافية والمهنية والعلمية والدقة في العمل بل ظننت بسبب بعض مشاكل التصميم عندي انها لا تصلح وكل المنشورات خداع ومحاولات فاشلة من اجل كثرة المشاهدات لا غير
Nice video ❤
Hello my friend.you send me the first comment and Im so happy you like my video . I try my best for you ❤️❤️
What material did you make this from? Is that pvc board?
Yes. 16mm pvc board👌
É o melhor vidio bem explidadoy
Thank you my friend ❤️❤️❤️❤️👋🏻
Hi creator, do you mind if I ask you some information about this design?
Hello my friend be easy.what is your question?❤️
@@DRILLSHOW Could you help me to control pt100 and the 3D heating by stm32f1 or arduino? I have followed the source on some websites but it couldn't active.
You want this for controlling the incubator heat?
Yeah@@DRILLSHOW, could you help me about this problem?
@@cc2e53 Unfortunately, I have no experience in this field. But more sensitive sensors such as SHT series and ds18b20 are needed for the incubator. Be careful in choosing the sensor and accuracy range.
you good man, thanks for sharing!!
Your welcome bro❤️. Thats make me happy you watch my others videos 🤛🏻👏🏻
دائما متميز ....شكرا
❤️❤️❤️❤️
Hello friend, I am a student and I wanted to know if you have that incibator in the solidworks or autocad program with its turning system
Hello to you dear . I dont have its 3d design file but its so simple to design it on catia or solid work application.
That's motor where can get
They are gear ac gear box motor that you can get from amazon and other
❤❤
Boa noite vc poderia me audar?
❤️sure . What do you want to know?
❤❤❤❤❤❤❤❤❤❤
Qual o valor deste sistema