How to make an automatic incubator for 150 eggs

In this video you will see how you can easily build an automatic incubator for laying chickens.
The incubator is made of 18 mm thick OSB 3 waterproof board.
Incubator dimensions are 75 cm high, 60 cm wide and 60 cm deep.
The incubator is painted with non-toxic, water-based, non-toxic acrylic paint.
To turn the eggs in the incubator, an engine was placed to turn the grill into the oven of the stove.
The programmer is 9999 seconds and is programmed to turn the eggs every 2 hours (or 7200 seconds).
The thermostat, using the probe in the incubator, switches off the heaters at the set temperature and maintains the required temperature in the incubator using programmed hysteresis.
It has 2 hammer heaters of 150 each.
The fan is the computer case cooler.
The power supply is 220 V and 12 V DC.

[@smestajupozarevcu5755]

Great job, this is something one can use to start small business,

[@sgvideo1941]

Yes, that's right. Thanks for watching.

[@guillermo2733]

Congratulations on your project. I have learned a lot from your video. Thank you so much for sharing it.
Greetings from Oviedo.

[@WoodworkProjects]

Thanks for watching.

[@dileidylopez3983]

h €

[@glenncollins294]

Thanks for the idea. Glenn

[@markpennella]

It's better to show the finished product in action. Then we can decide if we want to use our value time to watch the build. Thanks great work.

[@MENASI-VISIO]

This is. Great and nice project wow.

[@drvictor9623]

Good project!

[@sumankarmakar6123]

Nice design

[@andresrafaelverdugoromero6147]

Saludos desde Colombia

[@sgvideo1941]

Greetings to you from Serbia as well.

[@RD-kr1el]

Excellente vidéo
merci beaucoup

[@WoodworkProjects]

Thanks for watching. I'm glad you like the video.

[@naturelover3015]

Nice

[@sumankarmakar6123]

Thank you..

[@user-yc2yo6vj7w]

جسم الفقاسه صغير وبالتالي سيصل لدرجة الحراره المطلوبه بسرعه مما يجعل الهيتر ينطفأ وبالتالي لن تتولد الرطوبه
تحتاج الى مولد رطوبه

[@DomingosVarela]

A great project... congratulation!👍

[@WoodworkProjects]

Thanks for watching.

[@DomingosVarela]

@@WoodworkProjects did you do any calculations to size the heat source and the box size?

[@user-zq6nz9sq7w]

عمل جيد،، شكرا لك
نريد رؤيه الكتاكيت 🐣🐣🐣🐣🐣

[@yimyvalenciacaicedo4326]

Amigo muy interesante su video me podrías regalar el esquemas de las conexiones

[@neelapankayam9170]

വളരെ നന്നായിട്ടുണ്ട്

[@WoodworkProjects]

Thanks for watching.

[@dawiddiedericks9848]

Very good.
But what is the dimension

[@WoodworkProjects]

Incubator dimensions are 75 cm high, 60 cm wide and 60 cm deep.

[@user-bn2yg5qm2c]

أحسنت عمل جيد

[@WoodworkProjects]

Thanks for watching. I'm glad you like the video.

[@user-bn2yg5qm2c]

@@WoodworkProjects I have benefited keep posting videos 👏

[@ketayakthumba9701]

How to setup tray rotation to get parallel place.

[@fotisperdikis125]

where can i buy similar resistor????( heating tube, thank you

[@WoodworkProjects]

I live in Serbia and there are some here, but they can hardly be sent abroad. Search locally. The heaters are wound from a wire that is an alloy of iron, nickel and chromium. In our country it is called cekas or cantal wire. Greeting.

[@marvinloka1246]

Nice
How many watt is the heater?

[@WoodworkProjects]

150 W

[@markmerrill7411]

I was curious to how long you let the fan run

[@WoodworkProjects]

The fan runs constantly.

[@inpalekudygg3295]

Can I buy this machine.. How much Rupees for this...

[@azhariqbai8022]

سر ٹرے رولنگ کے لئے موٹر کون سی استعمال کر رہے ہیں اس موٹر کا نام کیا ہے اور کہاں سے ملے گی شکریہ

[@WoodworkProjects]

The motor that is placed in the incubator is used in the stove to turn the grill for baking.

[@gulzarkhan8860]

@@WoodworkProjects use 24v 2.5 rpm motors. Incubator motors. 🇱🇰

[@WoodworkProjects]

@@gulzarkhan8860 The engine is 220 V, 2 rpm.

[@GustavoLopez-mx5zo]

Lo cansele