Fusion 360 - Most reliable DXF creation method

If you're like me, you've had trouble at some point with DXF scaling. You put in a bunch of work, export your DXF, then the fabricator calls and says "uhhhh are you sure it's supposed to be THAT big?" Well, those days are over. In this video, we use Fusion 360 to show you how to create reliable, accurate DXF's EVERY. SINGLE. TIME.
Want to hang out and design stuff with me LIVE? Check me out on Twitch!
twitch.tv/Jilkins

[@muhammadmubeenjavaid3477]

Explains what is exactly needed. Really helped me a lot. Love it.

[@jilkins2377]

Thanks! Glad you found it helpful!

[@djo6198]

This is definitely the best way. I happen to be running into scaling problems. It's converting the file into metric even though my document settings are in inches. Might be good to ad this fix to this video. For the sake of clarity... my comments are not criticisms, just my experience. It's hard not to love Fusion for cost vs power but sometimes I hate it. Going to reach out to Fusion team. Thanks!

[@DonatasGedvilas]

Thank you for clarifying according DXF export with Fusion 360.

[@thomasreece9750]

Thank you. I fell for the trap but your video saved me.

[@MrCelali]

You solved my 2 problems in 1 video.Thank you.

[@nickabee1149]

WARNING ! ! ! Just like to point it out if you haven't noticed. it does not save that projection you made as a DXF. Fusion actually saves the "sketch face". You can just make a sketch on that face, without a projection or lines/geometry and get a DXF. It makes the "sketch face" or blue shade area into a DXF. you will be upset if you have counter bores or counter sinks and try to save a projection thinking that is what you'll get. I know.

[@reinisducmanis795]

Extremely helpful! But how do you indicate bend lines?

[@Quacky-en7pq]

Thank you so much for this video! This is so helpful!

[@maxlindgren5795]

This helped me so much, thank you!! :D

[@jensonhartmann3630]

Yeah man, subbed for sure. I like your style.

[@jilkins2377]

I appreciate that! Stay tuned for more!

[@DimitriosApostolou]

Thank you bro.. keep the good working

[@aviatorblc]

Big help. Thanks.

[@HoundDogRock]

Nice video, thanks! But how can we indicate the cutting lines or engraving lines in the DXF?

[@garyschmitt1493]

thank you!!!

[@broderp]

You say it results in problems, but don't show or state what those problems are. What if your item is a simple flat piece with a few holes (no bends) do you still need to go through all this? What happens if you draw something up and don't create an item as a "sheet metal part" how does this impact the export. So many unanswered questions.

[@jilkins2377]

Definitely understand where you’re coming from. The purpose of the video was to be quick and provide a reliable method that works regardless of other factors (like the title says). Going through all of the possibilities would be a good idea for another video (or two) but would have made this one too long

[@PR-1337]

What difference would it make if, after pressing create flat pattern, you press the export DXF button next to finish flat pattern?
That's what I usually do and so far there hasn't been any scale failure, but maybe there is a risk of that?

[@TROYOSTRANDER]

Any advice for a depth recognizing multi layered dxf export for woodworking with 2.5 axis milling?

[@yair1956]

..no we need to go over to how to import and properly scale DFX file,

[@ortal2013]

thanks for the vid.
managed to do it' but the viewer doesn't show the logo.
any sugestions?

[@ac3r787]

Danke

[@nevillecreativitymentor]

I wanted to get the dimensions too ...

[@joell439]

👍👍😎👍👍

[@HarryAnderson-z3w]

Clark Melissa Garcia Edward Thompson Steven

[@bobholsberger1121]

turned my drawing into two straight lines
??

[@bobholsberger1121]

sorry mate, my bad.....pressed wrong key