Thanks for showing the complete update process. I'm a Mac guy and every time I get the PC out something goes wrong. But this video really helps, more so than the official Hubsan update video.
Once again, excellent tutorial of the Zino firmware update. I am still flying stock and waiting for more results of other Zino pilots with android updates Thanks for sharing your review that was very easy to follow. 👍 👍
Thanks for the great video. I just received my Zino on Saturday and unfortunately it had the old firmware. This video made it pretty easy to tackle, now to complete the transmitter update next.
Nice video on upgrading the FW was easy, prior to my upgrade I had the TBE because I did not do a compass calibration before my flights today................Sucks have to do this all the time.
Phew - that was complicated! I do like Chinese puzzles, have a few wooden ones AND a set of Tangram stones but this was a whole new level! One would think that if you have two bars on top of each other with the option 'upgrade' right next to it and you just successfully selected the top bar and upgraded the firmware, all you have to do is select the bottom bar for the gimbal and click 'update'. No such luck of course: "RX Update Time Out!" - as if I would know what that means. ;-) The confusion comes IMO from the recommendation to update everything 'at the same time' - which probably means: Update everything before you start flying (again). For some reason, I finally was successful only after completely restarting my laptop, go online once more, open this video once more and start again 'from the beginning' before the dreaded incomprehensible warning disappeared and the gimbal was updated. Also, thanks for the heads-up on only putting the 2 'bin' files on a freshly formatted micro-SD card. Worked like a charm. Great video! Really helpful!
@@QCGUY Actually Fu Traing Wang and Chuan-Chih Hsiung proved in 1942 that there were exactly 13 convex Tangrams. ;-) For anybody that is a bit of a math geek - there's an explanation online (with a Pascal program) paulscottinfo.ipage.com/tangrams/
Maybe I should have labeled my comment als "Irony on/off". I thought it was obvious though. This must be the worst update routine ever. Stunningly complicated and overall bad.
Thanks for the detailed information. There's something I'm curious about. Why didn't you update the FC and Gimbal at the same time? Can't select both and update?
VoyagerDoc You’re supposed to do one at a time. You can do one update then close the program as hubsan recommends or it also works if you want to leave the tool open to go onto the next update but not both simultaneously.
Dear Chris, thanks a lot for this and other very informative videos you created. My Zino has a wi-fi connection problem, red flashing light on the side. I did followed your "HUBSAN ZINO - NO WIFI - NO CONNECTION - CAMERA CABLE -ONE WAY TO FIX IT" video tutorial, opened the drone, checked all connection, took out the gimbal, checked throughoutly all possible connectio & cablse problems. I'm sure all is ok with it (btw now I fell realy proficient in assembling/disassembling of this model :) ). Once hardware was checked than I turned to software side. I followed very carefully this video but my camera IS NOT updating, after putting FAT32 formatted sd card with 2 update files only to the drone, and switching it on, no fast flasing red light appears. The red light flashes slowly as before, signalling no wi-fi problem. I tried multiple times with formatting, putting different update file verision on SD card, no succes whatsoever. What that could be? Any ideas? Could it be burned wifi module or mainboard problem? The dron is relatively new, has a few month and not many flight. Its my son who has collected his money for a long time to buy it (he's crazy about farming, tractors etc. and does pictures and movies of it). It stopped working suddenly, without any crash or flight problem. Help us please, I'm very sorry to my son that he lost his dron that he worked hard for.
It’s possible it could be the main board with perhaps the module burned out but if the camera image cable is shot you will have the same red blinking light and no wifi like you’re seeing now. It’s a cheap simple fix and I have a video for that as well. Good luck 👍
@@QCGUY Ok make sense, broken image cable could produce no camera update possibility and no wifi. Any idea where to buy such a cable for my model? I live in Poland and have no expereince with drons spare parts purchase... Waht to look at when choosing the right cable? Many thanks!
Great video. Can you please answer a question for me, I recently purchased the Hubsan 501m and I haven't read anything in the manual about normal and sport mode? Has it got only one speed? Thanks for your time.........
I like yours better than theirs (they say the 'connected notice is on the right side...). Just updated, everything went great but the Gimbal, took 3 tries (didn't close the tool first 2 times), but after rebooting the Zino and the app, went smoothly. But as part of the process, I came across a question: what is the controller/transmitter plug designation? It's not USB-C, nor mini USB. I would like to order a short straight-through controller-to-phone-with-thick-case cable, so Lightning to - what? Can't order it if ya can't name it. Hairy Potter 101...
I have updated to the latest fc, but on the app when I try to do hyperlapse it still says update to the latest flight control to dp hyperlapse. How do I fix this?
Thanks for showing. I´m Wandemberg and I have a matter with my zino. The aircraft can't conect for radio control. The aircraft turn on, the radio control turn on too, but not connect. What shoud I do?
Hi Sir, I'm trying to update the Zino with latest firmware. I bought the drone a month ago and would like to update everything. I downloaded latest tools and firmware. When I go to start the upgrade a window comes up file not exist ,does this mean it hasn't downloaded files properly?
@@QCGUY hi, sorry I didnt get back to you sooner, yes DC version v1.2.02, fpv version IT.vo.3.6, app version v1.7.1, transmitter version firmware HT016B.RP.VO.1.6, gumball Version zino.G.V3.0.2.4, transmitter hardware version 1.0.0, am I do the right thing by updating or is it worth waiting until I notice any issues? I'm new to all this drone business lol. Many thanks, by the way your videos are very informative. Thanks buddy
@@wolfacer422 Leave it alone if it is not giving you any problems. This is the first big mistake people make. They have mixed versions and unreleased versions all over the place right now so I would not do a thing. Is it working ok?
Hi there, can one just upgrade the AIRCRAFT without upgrading transmitter? I don't seem to get a cable to connect from transmitter to computer I also have another problem there seems to be no connection between aircraft and transmitter, as my phone screen reads "Aircraft disconnected" and nothing from there. Tried different phones, nothing!
I am very sorry for not doing a actual screen recording. The screen shot is poor as a result but not bad enough to make the process harder. You can do it! Suck it up buttercup! 🧡👍 PS. Bounded is a movement Hubsan!!!! LOL
" BOUNDED IS A MOVEMENT. ................. (insert name) " Love it man, with your permission, can I use the quote to thank companies that had performed a rude act upon my person??, LOL,!! 👍 👍 👊
@QC GUY Hi, i like to update only the camera, but if i put the two files on the FAT32 SD and put it on the Drone and after Stick in the Battery and start it the light don´t flash. What ist my misstake ? I bought the drone Used , the flying is very well and the videos/movies but the quality of the pictures is not perfect. What can i do?
If everything on the quad works and you can't update it then it's not broke....just need to figure out what is being done wrong or what isn't working which can be a number of things. I'm not saying you are doing it wrong but I have spent a lot of time helping people that say they did it exactly as shown only to find they didn't.
@@QCGUY That is great, why you didn't try or make a video about. In this case we can expand the range of it. Do you know when you will have a drone for sale, pls. Cheers
Hey Chris, my Zino pro says to update the FC firmware promtly. My Zino Pro is stock from around Christmas time. I have IT V0.1.6, Gimbal V3.0.0.6 & FC V1.0.12 Is is safe to upgrade to the latest on Hubsans website do you think?
My guess is, if you plug the USB cable into the drone and into your PC, and the little red light does not come on - that's BAD? The power button does illuminate but - no red light.
Should back up - the HZP crashed - the gimbal vibrates when I start it up but, does not do anything else. It's probably shot - but I thought I might try upgrading the gimbal software ... perhaps I have a deeper problem? I did fly the ZP after the crash - it SEEMed to be ok.
Hey man how are you I have a question for you , the video I'm getting on the SD card in my Zino is not 4K it looks horrible and don't allow me to change to 2K or 1080p on the app ,any clue ? Thanks
Michael Silva Mine is fine starting the video at anytime. I have never used 2k because everyone wants to see 4k in a video but try deleting and installing the app again.
The drone does not connect to the remote control. The wifi light is flashing. the gimbal is stopped, does not stabilize. I changed the servo cable. now the gimbal works (it is stable), but still does not connect to the remote control. what do you think about it?
Giuseppe De Pasquale Yes if it’s still a flashing light then I would replace that cable as well especially know knowing it fell from a tree. Best of luck 👍
Наука
Thanks for showing the complete update process. I'm a Mac guy and every time I get the PC out something goes wrong. But this video really helps, more so than the official Hubsan update video.
Thanks champ, I'm a newbie to the drone world. I followed your instructions with the latest updates. Worked a treat. You little beauty.
Another good one Chris!! Thank you for all your hard work, efforts, R&D and time! 👍
Levi Olive Thank you 👍
Thanks for the video. Very informative and easy to follow! Followed your lead and was successful in my upgrades.
Once again, excellent tutorial of the Zino firmware update. I am still flying stock and waiting for more results of other Zino pilots with android updates Thanks for sharing your review that was very easy to follow. 👍 👍
Thanks for the great video. I just received my Zino on Saturday and unfortunately it had the old firmware. This video made it pretty easy to tackle, now to complete the transmitter update next.
Nathan Aloisio Don’t forget to do the controller update on this one.
I have a video up on that as well.
@@QCGUY thanks, I forgot about that one as well.
Nice video on upgrading the FW was easy, prior to my upgrade I had the TBE because I did not do a compass calibration before my flights today................Sucks have to do this all the time.
thanks for taking the time to do this, very helpful
Perfect tutorial. Thanks for your time.
Phew - that was complicated! I do like Chinese puzzles, have a few wooden ones AND a set of Tangram stones but this was a whole new level! One would think that if you have two bars on top of each other with the option 'upgrade' right next to it and you just successfully selected the top bar and upgraded the firmware, all you have to do is select the bottom bar for the gimbal and click 'update'. No such luck of course: "RX Update Time Out!" - as if I would know what that means. ;-) The confusion comes IMO from the recommendation to update everything 'at the same time' - which probably means: Update everything before you start flying (again). For some reason, I finally was successful only after completely restarting my laptop, go online once more, open this video once more and start again 'from the beginning' before the dreaded incomprehensible warning disappeared and the gimbal was updated. Also, thanks for the heads-up on only putting the 2 'bin' files on a freshly formatted micro-SD card. Worked like a charm. Great video! Really helpful!
Good times in the stone ages right? lol
@@QCGUY Actually Fu Traing Wang and Chuan-Chih Hsiung proved in 1942 that there were exactly 13 convex Tangrams. ;-) For anybody that is a bit of a math geek - there's an explanation online (with a Pascal program) paulscottinfo.ipage.com/tangrams/
Thank you so much indeed for this useful video. I'm planning to buy this wonderful drone and your video definitely helped!
The Italian Guy Join my Group for good deals. A new sale is coming up soon this month.
facebook.com/groups/qcguysdeals/?ref=share
Yes, now I am convinced. The Zino is a right Mavic beater. Great user experience all around. Updates could not have been made any easier.
Heiko Quant I couldn’t agree less if you’re trying to compare to Mavic. It will never be a Mavic killer.
Maybe I should have labeled my comment als "Irony on/off". I thought it was obvious though. This must be the worst update routine ever. Stunningly complicated and overall bad.
Heiko Quant It’s the Hubsan way! 😂
They don’t do simple but they do ass backwards really well!
THANK YOU kindly
Thanks very much, my friend!!!
Thanks for the detailed information. There's something I'm curious about. Why didn't you update the FC and Gimbal at the same time? Can't select both and update?
VoyagerDoc You’re supposed to do one at a time. You can do one update then close the program as hubsan recommends or it also works if you want to leave the tool open to go onto the next update but not both simultaneously.
@@QCGUY i see, thanks 👍
Just subbed...
Thanks for the video very helpful I down loaded the latest firmware today July 4 2019 and there is no camera firmware ?
Same here. Camera firmware files appear to be missing.
Dear Chris, thanks a lot for this and other very informative videos you created. My Zino has a wi-fi connection problem, red flashing light on the side. I did followed your "HUBSAN ZINO - NO WIFI - NO CONNECTION - CAMERA CABLE -ONE WAY TO FIX IT" video tutorial, opened the drone, checked all connection, took out the gimbal, checked throughoutly all possible connectio & cablse problems. I'm sure all is ok with it (btw now I fell realy proficient in assembling/disassembling of this model :) ). Once hardware was checked than I turned to software side. I followed very carefully this video but my camera IS NOT updating, after putting FAT32 formatted sd card with 2 update files only to the drone, and switching it on, no fast flasing red light appears. The red light flashes slowly as before, signalling no wi-fi problem. I tried multiple times with formatting, putting different update file verision on SD card, no succes whatsoever. What that could be? Any ideas? Could it be burned wifi module or mainboard problem?
The dron is relatively new, has a few month and not many flight. Its my son who has collected his money for a long time to buy it (he's crazy about farming, tractors etc. and does pictures and movies of it). It stopped working suddenly, without any crash or flight problem. Help us please, I'm very sorry to my son that he lost his dron that he worked hard for.
It’s possible it could be the main board with perhaps the module burned out but if the camera image cable is shot you will have the same red blinking light and no wifi like you’re seeing now. It’s a cheap simple fix and I have a video for that as well. Good luck 👍
@@QCGUY Ok make sense, broken image cable could produce no camera update possibility and no wifi. Any idea where to buy such a cable for my model? I live in Poland and have no expereince with drons spare parts purchase... Waht to look at when choosing the right cable?
Many thanks!
@@QCGUY and one more Q: is that this video you talk about: "HUBSAN ZINO & ZINO PRO - HOW TO REPLACE CAMERA IMAGE CABLE"?
@@piotrwasik7697 I have a video on replacing the camera cable and the links are there as well.
@@piotrwasik7697 This update video....look for the camera cable video in my collection of videos.
Great video. Can you please answer a question for me, I recently purchased the Hubsan 501m and I haven't read anything in the manual about normal and sport mode? Has it got only one speed? Thanks for your time.........
prokopis v You just have normal and expert mode in the app which just switches it from the current 100% to about 60%.
Thank you very much....
I like yours better than theirs (they say the 'connected notice is on the right side...). Just updated, everything went great but the Gimbal, took 3 tries (didn't close the tool first 2 times), but after rebooting the Zino and the app, went smoothly. But as part of the process, I came across a question: what is the controller/transmitter plug designation? It's not USB-C, nor mini USB. I would like to order a short straight-through controller-to-phone-with-thick-case cable, so Lightning to - what? Can't order it if ya can't name it. Hairy Potter 101...
David Kempton Im glad it worked out for you. 👍
Thanks for the comments 🧡
I have updated to the latest fc, but on the app when I try to do hyperlapse it still says update to the latest flight control to dp hyperlapse. How do I fix this?
Whonam Gotta wait for them to fix that one.
Thanks for showing. I´m Wandemberg and I have a matter with my zino. The aircraft can't conect for radio control. The aircraft turn on, the radio control turn on too, but not connect. What shoud I do?
Andre Wandemberg Join my group....
I can’t help you hear 👍
facebook.com/groups/HubsanQC/?ref=share
Hi Sir, I'm trying to update the Zino with latest firmware. I bought the drone a month ago and would like to update everything. I downloaded latest tools and firmware. When I go to start the upgrade a window comes up file not exist ,does this mean it hasn't downloaded files properly?
wolfacer You bought it a month ago and you want to update it?
What FC, Gimbal, IT Camera and Controller firmware do you currently have?
@@QCGUY hi, sorry I didnt get back to you sooner, yes DC version v1.2.02, fpv version IT.vo.3.6, app version v1.7.1, transmitter version firmware HT016B.RP.VO.1.6, gumball Version zino.G.V3.0.2.4, transmitter hardware version 1.0.0, am I do the right thing by updating or is it worth waiting until I notice any issues? I'm new to all this drone business lol. Many thanks, by the way your videos are very informative. Thanks buddy
@@wolfacer422 Leave it alone if it is not giving you any problems. This is the first big mistake people make. They have mixed versions and unreleased versions all over the place right now so I would not do a thing. Is it working ok?
@@QCGUY ok, cheers for that. Kind regards Mike.
@@wolfacer422 Is it working ok?
Hi there, can one just upgrade the AIRCRAFT without upgrading transmitter? I don't seem to get a cable to connect from transmitter to computer
I also have another problem there seems to be no connection between aircraft and transmitter, as my phone screen reads "Aircraft disconnected" and nothing from there. Tried different phones, nothing!
Have you joined my group? You can get better help from me or other great troubleshooters there.
facebook.com/groups/HubsanQC/?ref=share
I am very sorry for not doing a actual screen recording. The screen shot is poor as a result but not bad enough to make the process harder. You can do it! Suck it up buttercup! 🧡👍
PS. Bounded is a movement Hubsan!!!! LOL
" BOUNDED IS A MOVEMENT. ................. (insert name) " Love it man, with your permission, can I use the quote to thank companies that had performed a rude act upon my person??, LOL,!! 👍 👍 👊
Hello. May I know how you modify the start sound? The original one is so annoying
Sing00525 You don’t...they all don’t sound the same because Hubsan makes changes along the way and those with different esc’s sound different.
@QC GUY Hi, i like to update only the camera, but if i put the two files on the FAT32 SD and put it on the Drone and after Stick in the Battery and start it the light don´t flash. What ist my misstake ? I bought the drone Used , the flying is very well and the videos/movies but the quality of the pictures is not perfect.
What can i do?
Troubleshooting is best done in my help & support group. Thanks
facebook.com/groups/HubsanQC/
Have followed all the processes but when I reach at the camera upgrade tool it doesn't update. Tried different SD cards but no success
If everything on the quad works and you can't update it then it's not broke....just need to figure out what is being done wrong or what isn't working which can be a number of things. I'm not saying you are doing it wrong but I have spent a lot of time helping people that say they did it exactly as shown only to find they didn't.
Hi Chris,
The Wi-Fi board have a place to connect an external antenna, please? Cheers and all the best
It has 2
@@QCGUY That is great, why you didn't try or make a video about.
In this case we can expand the range of it. Do you know when you will have a drone for sale, pls.
Cheers
Also Chris please don't forget me when you have a Zino Pro. Thank you and a lovely day :-)
Hey Chris, my Zino pro says to update the FC firmware promtly. My Zino Pro is stock from around Christmas time. I have IT V0.1.6, Gimbal V3.0.0.6 & FC V1.0.12
Is is safe to upgrade to the latest on Hubsans website do you think?
Bryan Gill I think it’s ok but if you are happy it now maybe just update the FC only.
Can I choose to update only the gimbal? No need to update the other components?
Correct! It is fine to do just the gimbal.
What is/was your connection with Hubsan?
There was something once but nothing of much interest….👍🏻
Is there .a way to update the firmware via a Mac?
This is just PC. Sorry
Does anyone know what to do when the camera upgrade will not update?
facebook.com/groups/HubsanQC
Chris my slot for upating the controller firmware is different. I have no pins. Please help i can sent pic.
warren Garner It’s the new version and so it has the latest and won’t be likely to ever see another update anyhow. 👍
Ah OK.
My guess is, if you plug the USB cable into the drone and into your PC, and the little red light does not come on - that's BAD? The power button does illuminate but - no red light.
Should back up - the HZP crashed - the gimbal vibrates when I start it up but, does not do anything else. It's probably shot - but I thought I might try upgrading the gimbal software ... perhaps I have a deeper problem? I did fly the ZP after the crash - it SEEMed to be ok.
@@ap14rcf70 Not so easy to troubleshoot here but this is also why I created a group. Thanks
facebook.com/groups/HubsanQC
Hai my zino doesn’t connect to the update tool whatsoever.
It just says wait for link ..
facebook.com/groups/HubsanQC/?ref=share
Hey man how are you I have a question for you , the video I'm getting on the SD card in my Zino is not 4K it looks horrible and don't allow me to change to 2K or 1080p on the app ,any clue ? Thanks
Michael Silva What firmware versions are you on? What are your SD card specs?
@@QCGUY I'm using a sandisk extreme PRO 128 gb U3 and firmware is the 3.6 I think ,it can be because im not starting my video before take off ?
Michael Silva Mine is fine starting the video at anytime. I have never used 2k because everyone wants to see 4k in a video but try deleting and installing the app again.
@@QCGUY I will try and I will get back to you , I'm wondering if my card is defective
Michael Silva Yes as for your card I would try another one.
J have done all good in camera calibraction and it isnt work :/
facebook.com/groups/HubsanQC/?ref=share
Hello still having "not connected" while puting usb cable on my computer with my Zino
Still or no?
@@QCGUY I also have this issue. I have tried to connect/reconnect many times and I have tried 2 different computers :/
Nevermind, I tried using a different USB cable and that worked
Rúnar Magnússon Glad I could help! 😂
Seriously, Im glad you sorted it out. 👍
The drone does not connect to the remote control. The wifi light is flashing. the gimbal is stopped, does not stabilize. I changed the servo cable. now the gimbal works (it is stable), but still does not connect to the remote control. what do you think about it?
the drone had fallen from a tree
sorry my english, i write from italy
I also bought the other gimbal cable, but I didn't replace it. do you think I should try to change that too? I can't find any videos
Giuseppe De Pasquale Yes if it’s still a flashing light then I would replace that cable as well especially know knowing it fell from a tree. Best of luck 👍
Giuseppe De Pasquale and you’re English is great!