From what I've seen online you can indeed turn off the RGB strip on the front without disconnecting the cables, apparently, you just hold the RGB mode selector button down for a bit and it'll turn the lights off till you press it again.
Confirmed. got this case myself and that´s exactly how you turn the RGB off. Pressing the button once again turns it on again, letting you return to the rgb mode you had activated before turning it off.
well if you got the front LED's connected to your psu, you should be able to turn them on. if it doesnt work, try another plug from your psu. if it works with another plug, one of your plugs may be damaged. if the led's wont work on any plug, they´re probably damaged and you should send it back to vendor to get a new case.
6:28 Aerocool advertises holding the mode switch for 2 seconds to turn off LED. Were you sitting there cycling through the modes looking for the off one?
I had an unused B250 mining motherboard so bought the cylon case and built up the system using a pentium CPU threw in 8Gb ram win10 64 bit with a 500Gb SSD 500w power unit and sold it to my sister who wanted one simply for general use (I did put in a fan at the top IN and the fan at the rear OUT plus Intel stock cooler. Plus a oouple of RGB strips interior as the case has the tempered glass. System runs at about 32 - 50 degrees absolutely no probs. As you say the RGB is really good and my sister loves the appearance of the unit overall. So, great review. Oh and I got over the internal SSD connectors by using straight power plugs NOT the L shapes ones.
The part where you cant turn off the rgb on the front isint true you just need to hold down the button for a few seconds and it will turn off ...at least mine will
4:03 putting a fan there in pull configuration will give you worst temp then not having a fan in there in first place. that fan isn't doing anything other then reducing the amount of air GPU fans can blow on GPU heatsink. NEVER install a fan that pulls the air away from front of a fan that's blowing air on heatsink/radiator.
I quite liked the video, wasn't the most in detail but it was a good overview of the case and it's features. really looking forward to seeing more from ben in the future.
@@sunmoon2b in the midst of typing, i am currently building my new rig. pros: looks great gives you plenty cable mangement holes cons: fan mounts in the front are flimsy air intake in the front is meh the psu shroud feels more in the way than not and isnt removeable also the clear side panel is plastic and feels cheap/ flimsy. as a first time buyer of a case meant for flash than function............... it passes, barely. this case is noticabley small when working on it. now its a mid atx case but i cant but feel like my hands get stuck too often trying to get the cables managed. honestly i do like this case, i just dont think reveiwers have given all the flaws proper screen time. if it ever goes on sale grab one. either than that get something with an actual glass panel from a more respected brand. hoped it helped.
This video was perfect. I’m about to assemble my first pc and on a budget until I can then upgrade as I have the core parts. This case was recommended to me. Thank you for your service.
@@itstusk8618 Same I haven't bought anything yet but I'm going to keep researching the things i need cause i am confused af also i've made a few short vids on gaming so pls check them out
For the people that want to remove the front panel is very easy you only need a screwdriver and make some strength in the tiny parts of plastic that are like little circles
on the amazon reviews people said that there was very poor airflow, but judging by this review now i know that there is adequate airflow which is good enough for me since i only have a 1050ti
Yeah I have the same case and it gets hot. Even with 4 intake fans. I switched to a different case and it’s a lot better. My cpu was doing 89 C to 50 C after switching
I have the mini version of this case and I was thinking of putting fans on the front of the case I wanted to know how effective they are as there is a front pannel
in amazon and other sellers, they are stating that this case has a tempered glass panel. Is there a tempered glass panel variant of this case, or is it just acrylic
how do you know that the top portion of the case is connected correctly? obviously it turns on and off but the headphone and mic jack don't work ? if anyone could help, please.
I have this case and have recently upgraded to a 8700k and really don't know which cooling solution should I get! Can it really accomodate a 240MM radiator on the front with no issues ? or should I just go with 120MM on the back of the case?
I have a question. So I just recently lost the top layer part of where the graphics card is supposed to go, like the thing that you take off before you install the graphics card. What do I do, does it matter? I’m really worried it might like being in more dust in or something lol
TheGamingFox I found out that the front panel of the case can be pulled off just make sure to apply pressure evenly, also I’d recommend putting two fans in the front pulling air in and one in the back pushing air out
Looks like the case has a cut out for the 8 pin CPU power cable but in your build you did not use it. Can the CPU power cable be rooted behind for better cable management?
I really want to install a second fan on the front where the led strip is, but I would have to remove the complete front panel which seems to be hold on by a bunch of plastic thingys. Can it be removed without breaking those? :/
I still wonder though, does this case on the front supports a 140mm fans, instead of 120mm, despite the number of the fans of the front could be 3x120mm, can it support at least 2x140mm ?
just got this case in the mail knowing how bad the air restriction is in the front due to the RGB panel but im putting large holes in the front with a special drill bit i have so thats a solution ;)
I already have my pc but I want to upgrade it so I need more fans I know it can fit 120mm fans in the front but I haven’t noticed any ventilation or air holes on the front so I just want to know if it is still ok to put the fans in?
I have a question about the front rgb i am new to pc building so can u explain how and where the rgb things go ? If iam correct it drawns power from the sata and the other 4 pin connector goes ? Thank u!
If you look inside the case, you can actually see 6 (or 8 don't remember) plastic pins. Press them and gently pull the front panel. I've done it once, but I would not recommend doing it too often as the plastic seems flimsy.
what is that cable management?? i have this case, and i made it look pretty clean looking. also, the air flow is kinda bad, cause the front of the case, only has a small spot at the bottom of the front panel, that can let air in. so i took some hot glue and pulled it out a little bit to get better airflow.
Can you elaborate on that? How did you pull it out a little bit as in did you just make it so that air came in from all around the panel instead of just the bottom or what? Im asking cause this is my first pc build on top of having a budget
Yea i already know but i didn't know then well i knew that i had to remove the front panel but it wad very tight so i didn't want to break it then but now ik.
6:35
You CAN turn off this front LED!
Press button and hold it for few seconds
Алексей Воробьёв really
Where do u plug in the LED power cables?
I have the same case and that was the first thing i tried when i plugged in my PC the first time. Worked lika a charm.
mitchjk11 it’s sata, the other connector goes to the led board behind the front panel
I can confirm this too, I have the Bolt and it's the same.
8:47 nice single channel ram you're running here
Yeah sirrr
Right
Some ram come with 1 real stick and one fake stick to fill up the empty slots, but I’m sure this is not the case here
lol
lol
2:18 to 2:25 you’re a rapper dude
Lol put on x2 speed
Rūdolfs Zvaigznīte 😂😂😂
kaut kāds Rūdolfs:D
Lmao
Lmfao!!!!
Perfect RAM configuration. Congragulations!
LOL IKR He did it so wrong.
Maybe he's working for the Verge
They doin it verge style
I was literally just about to bitch about this... who does this?
I started learning about gaming computers 2 weeks ago and even I know the ram is wrong lol
From what I've seen online you can indeed turn off the RGB strip on the front without disconnecting the cables, apparently, you just hold the RGB mode selector button down for a bit and it'll turn the lights off till you press it again.
Confirmed. got this case myself and that´s exactly how you turn the RGB off. Pressing the button once again turns it on again, letting you return to the rgb mode you had activated before turning it off.
@@Paddhie i got the case too but the front is always off but why? :/
well if you got the front LED's connected to your psu, you should be able to turn them on.
if it doesnt work, try another plug from your psu. if it works with another plug, one of your plugs may be damaged. if the led's wont work on any plug, they´re probably damaged and you should send it back to vendor to get a new case.
@@Paddhie i dont even plugged the sata cable from the case in
there we go^^ .... if the front led's arent connected to your psu, they can't glow xD
Isn't the front plastic cover a bit restrictive on air-flow??? I think it has very small holes for air input.
You're RAM is in the wrong slots, B350-F takes two sticks in dual channel in slots 2 and 4! I have one myself :D
ha. i replied with the same criticism.
Lmao I was going to say the same
TheFunContinues well your grammar is in the wrong slot
Your*
I saw it too and instand taught:
There is no way he did this!
2:18 10 rappers eminem is afraid to diss
6:28 Aerocool advertises holding the mode switch for 2 seconds to turn off LED.
Were you sitting there cycling through the modes looking for the off one?
6:29 you can actually turn off the LED by pressing and holding down the LED button. I have tried this myself and it works.
Thx
0:05 General kenobi!
You are a bold one (I see you are a man of culture as well)
1:50 love the cable management
Did the guy from the verge install your ram?
Important question - how to remove the Front Panel - the one with the RGB thing
Nameless Musik u just gotta pull it out, but care with the cables
i know its a video about a case but your ram is installed wrong
I had an unused B250 mining motherboard so bought the cylon case and built up the system using a pentium CPU threw in 8Gb ram win10 64 bit with a 500Gb SSD 500w power unit and sold it to my sister who wanted one simply for general use (I did put in a fan at the top IN and the fan at the rear OUT plus Intel stock cooler. Plus a oouple of RGB strips interior as the case has the tempered glass. System runs at about 32 - 50 degrees absolutely no probs. As you say the RGB is really good and my sister loves the appearance of the unit overall. So, great review. Oh and I got over the internal SSD connectors by using straight power plugs NOT the L shapes ones.
The part where you cant turn off the rgb on the front isint true you just need to hold down the button for a few seconds and it will turn off ...at least mine will
Extremely comprehensive and thorough review, you really helped me chose. Thank you
Don’t know why people are so critical, I like this video a lot
i like it i just hate everytime he says sarter not sata.
The RAM is placed wrong.
@@billygray8863 yes
Ram.
@sage mode scratch He did a verge
The fan on top of the shroud is meant to increase cool air going to gpu otherwise it clashes with the oncoming air from your psu
Well, by experience, at least in this case, the motherboard's 8pin cable can pass behind the motherboard, so, no need to cross the cable like that :D
I actually passed my 4 pin (yes, it's old) in a strange hole just above the mobo
Ancient Gameplays Hey man, how has your experience with airflow in this case been?
3:31 you can turn off the RGB just hold down the button for a couple of secs.
Very good review. The voice over may lack pizazz but it is concise and factual which is what I want from a review. Good job.
4:03 putting a fan there in pull configuration will give you worst temp then not having a fan in there in first place. that fan isn't doing anything other then reducing the amount of air GPU fans can blow on GPU heatsink. NEVER install a fan that pulls the air away from front of a fan that's blowing air on heatsink/radiator.
long time ago, but where do you want your fans to be? in the top and near the rgb or?
I'm wondering where do I plug the led in theres only a sata cable the same one shown in the video and I dont no where to plug it in
Also how do I take the front panel off
Мне показалось или на 8:02 провод питания кулера просунут прямо через лопасти ?
got this case for a friend's budget build!...I fell in love as I helped him put it together!
Does this come with a fan ?
And is it a micro atx
I quite liked the video, wasn't the most in detail but it was a good overview of the case and it's features. really looking forward to seeing more from ben in the future.
awesome vid! i was afraid it was a cheap knock off case for a quick cash grab but im super excited now. youre a huge help thanks!
Have ypu bought it? How's the airflow and quality?
@@sunmoon2b in the midst of typing, i am currently building my new rig.
pros:
looks great
gives you plenty cable mangement holes
cons:
fan mounts in the front are flimsy
air intake in the front is meh
the psu shroud feels more in the way than not and isnt removeable
also the clear side panel is plastic and feels cheap/ flimsy.
as a first time buyer of a case meant for flash than function............... it passes, barely. this case is noticabley small when working on it. now its a mid atx case but i cant but feel like my hands get stuck too often trying to get the cables managed.
honestly i do like this case, i just dont think reveiwers have given all the flaws proper screen time. if it ever goes on sale grab one. either than that get something with an actual glass panel from a more respected brand.
hoped it helped.
@@jonnyhogan1921 I would buy a phanteks p350x or a carbide spec 270R instead of this then. Thanks.
This video was perfect. I’m about to assemble my first pc and on a budget until I can then upgrade as I have the core parts. This case was recommended to me. Thank you for your service.
dont put the ram like that
@@itstusk8618 Same I haven't bought anything yet but I'm going to keep researching the things i need cause i am confused af also i've made a few short vids on gaming so pls check them out
For the people that want to remove the front panel is very easy you only need a screwdriver and make some strength in the tiny parts of plastic that are like little circles
I just yank it off with my hands
on the amazon reviews people said that there was very poor airflow, but judging by this review now i know that there is adequate airflow which is good enough for me since i only have a 1050ti
Yeah I have the same case and it gets hot. Even with 4 intake fans. I switched to a different case and it’s a lot better. My cpu was doing 89 C to 50 C after switching
can you put MSI GeForce GTX 1660 Ti 6GB Ventus XS 6G OC this tower? plz answer me
0:35 WTF IS THIS RAM XD
What am I looking at
Actually you can turn off the rgb by holding down the button for a few seconds
6:30. if you hold the RGB button down it turns off
You can actually turn off the case RGB LED by holding the button
My rgb on the front doesn’t work any help?
I have the mini version of this case and I was thinking of putting fans on the front of the case I wanted to know how effective they are as there is a front pannel
shouldn't the front pannel have some gaps 4 the air to flow?does adding some fans on the front panel really help?
Those CPU temps are amazing considering that is a stock Wraith Stealth, nice build!
Can we stuck the Orange color on the tower ?
6:30 you hold down the button to turn the led off 🙄🙄
HAHA people 2 years back aren't so smart
in amazon and other sellers, they are stating that this case has a tempered glass panel. Is there a tempered glass panel variant of this case, or is it just acrylic
Yes there is a tempered glass variant and it's a bit more expensive
Im The Legend what about the gpu covers at the back of the case. Do you unscrew them or snap them off
how do you know that the top portion of the case is connected correctly? obviously it turns on and off but the headphone and mic jack don't work ? if anyone could help, please.
I have this case and have recently upgraded to a 8700k and really don't know which cooling solution should I get! Can it really accomodate a 240MM radiator on the front with no issues ? or should I just go with 120MM on the back of the case?
Doesn t this ram slot configuration look odd ?!
I have this case and the light was working but now half of it works or the colors glitch
I have a question. So I just recently lost the top layer part of where the graphics card is supposed to go, like the thing that you take off before you install the graphics card. What do I do, does it matter? I’m really worried it might like being in more dust in or something lol
It should be fine, if anything its letting a bit more air in. but just when airing out your pc make sure to get the graphics card
How do you install the fans on the front of the case, I can’t figure out how to take off the front panel to reach the slots
Same, I’m building my first pc today and I’m not sure where to put the fans
TheGamingFox I found out that the front panel of the case can be pulled off just make sure to apply pressure evenly, also I’d recommend putting two fans in the front pulling air in and one in the back pushing air out
Looks like the case has a cut out for the 8 pin CPU power cable but in your build you did not use it. Can the CPU power cable be rooted behind for better cable management?
How turn on or what plug in to LED works ?? My nephew got this case and everything work exept LED strip.
Hi i bought this case but the light are lagging is there anyone who knows how to fix this?
@ ҉ ҉ i ҉ ҉ im sorry i dont know what they are can you describe what they look like?
You can hold down the led button to turn them off
So just making sure it is actually possible to fit in an atx motherboard into it?
I really want to install a second fan on the front where the led strip is, but I would have to remove the complete front panel which seems to be hold on by a bunch of plastic thingys. Can it be removed without breaking those? :/
I read the directions and it says you just have to hold it down for a couple seconds to turn the rgb off
At 6:14 i can see that with the way you have put the ram you don't have dual channel but single
Πατριώτη καλησπέρα 😂
Αξίζει το κουτί?
@@yugiboi1551 αμέ 😂 το έχω αγοράσει και μέχρι τώρα καλό είναι, μια χαρά
@@ΝίκοςΜουστάκας-τ4σ από καλώδια έχει χώρο ή θα τον πιούμε 😂 ?
@@yugiboi1551 έχει άλλα σε κάποια πράγματα θα πρέπει να είσαι λίγο δημιουργικός για να είναι "καθαρό" από την πλευρά που φαίνεται
@@ΝίκοςΜουστάκας-τ4σ κατάλαβα😂
You can turn off the lights off if you press the botton longer
I still wonder though, does this case on the front supports a 140mm fans, instead of 120mm, despite the number of the fans of the front could be 3x120mm, can it support at least 2x140mm ?
What is the name of the sata power connector for the rgb? One didn't come with the case and I need to buy one. Thanks.
Pls do the ram to dual Chanel pls 😭
Just got mine a couple days ago, they must have revised it because the top is not as flimsy anymore.
Wait is there no optical drive installation available for this one?
no
I rarely use a optical drive anyways but i do use a usb one
You can turn off the RGB strip by holding the button for 3 seconds
just got this case in the mail knowing how bad the air restriction is in the front due to the RGB panel but im putting large holes in the front with a special drill bit i have so thats a solution ;)
I already have my pc but I want to upgrade it so I need more fans I know it can fit 120mm fans in the front but I haven’t noticed any ventilation or air holes on the front so I just want to know if it is still ok to put the fans in?
I have a question about the front rgb i am new to pc building so can u explain how and where the rgb things go ? If iam correct it drawns power from the sata and the other 4 pin connector goes ? Thank u!
I have this case too, can i buy the Kraken X63 an install it on the Front ? I hope the case have enouth space for it 🤔
Can you fit a coolermaster liquid cooler 240mml in the front or shut i get a 120mml for in the back or the top?
how to remove back panel please ???
if i got this would i need a cooling sythem? im going to be having an i5 9600kf and dual geforce 2060 evo graphics ?
One question, where do those front fans take the air? If the lid covers everything, or do you use it without the lid?
Which way would you recommend fans blow air towards
you can hold the button down to power the led off
0:36 Now you realize why my school is so expensive and the shampoo has instructions?
Si wachin
Why are the two sticks of ram next to each other?
Idk it's a single channel so idk y he isn't puting them in 2 and 4 for duel channel
nice video but i can't understand how sata power rgb is connected
I have steady red light glowing at the top of my case? what indicator is this? thanks
Mr.Mohy same idk what to do
How did you removed the front panel?
I have the same doubt
Same question. Still a mystery to solve.
It actually sucks that there's no manual on how to remove it's front panel.
If you look inside the case, you can actually see 6 (or 8 don't remember) plastic pins. Press them and gently pull the front panel. I've done it once, but I would not recommend doing it too often as the plastic seems flimsy.
@@alexislaurent9100 whats the temps for this im quite hesistant to buy this case.
So uhhh... What's up with the placement of the ram sticks
Do you think you can install a radiator in the front
how is the front airflow in this case?
Still a mystery to me how set up front chassis fan
@@blockparts did you solve it? Help me
@@brunomoraes1963 just pull out the front case.
Also mind the cable attached to the rgb led
There is a hole at the front botom of de case
Can u use 3.5 inch drives?
What does the red blinking light mean?
I built my pc in this case and i see a red blinking light
Is it good or bad?
where do you see it?
Hard Drive activity
So you only need one sata cable from the power supply for the rgb to work?
what is that cable management?? i have this case, and i made it look pretty clean looking. also, the air flow is kinda bad, cause the front of the case, only has a small spot at the bottom of the front panel, that can let air in. so i took some hot glue and pulled it out a little bit to get better airflow.
Can you elaborate on that? How did you pull it out a little bit as in did you just make it so that air came in from all around the panel instead of just the bottom or what? Im asking cause this is my first pc build on top of having a budget
@@darkmario720yea, just pull the front panel off and hot glue the top pegs, then put it back on slightly, the hot glue should hold it in place
@@danktank501 thank you
how did you remove the pc's front ?
How do you take the front part, where the led line is, in order to put the fans?
how did you plug in the led power cord and which cord is the led cord thank you
The gap is small enough, will the air intake be enough from the front?
would i be able to use this with a CV650 or is it too big?
I am not getting the hard drive bays where are they int eh case
I have this case and I just realized that the fan that came with it, it was placed backwards and blew air in the case
@@altinfa1k696 I mean, with the right parts you can
How many fans have u installed and where are they connected ?
How do i change the rgb color and do i need a rgb headder? I need a quick answer pls
6:00 can you plug a fan in the front panel?
Yes, 3
you can turn off the rgb led by holding down on the rgb strip button
Pause at 4:30, what’s up with your ram
How did You Install The Front Fans There's No Way My Screw Driver Can Fit In There
He removed the front casing magically. Well. Obviously he missed it on this review.
Yea i already know but i didn't know then well i knew that i had to remove the front panel but it wad very tight so i didn't want to break it then but now ik.
@@yagnation649 you just had to pull the front case out. It was very easy for me.
Umm okay thx=).
@@blockparts how did you do it?