Lian Li Q58 | A 14.5L SFF ITX Build | Thermal benchmarks

Поделиться
HTML-код
  • Опубликовано: 23 янв 2025

Комментарии • 15

  • @BartAssink
    @BartAssink 20 часов назад

    Nice vid. I use the same case with aio for cpu. Tip! See if there are short (sff) cables with the psu. Saves you a lot of cable clutter. I bought some extra high feet so I can install a gpu aio some day at the bottom with a small reservoir in the top for air accumulation. Maybe I will keep the gpu air cooled. Because it is a puzzle with the q58.

  • @kamm3021
    @kamm3021 2 месяца назад +2

    *At least u have a heater for the winter* 💀

  • @enmaenmaenma123
    @enmaenmaenma123 Месяц назад

    solid content again!

  • @olivertrees
    @olivertrees 27 дней назад

    what would you recommend instead for the same compatibility?

  • @Coccobacillus1
    @Coccobacillus1 Месяц назад

    Mas better yung configuration na mag low profile air cooler sa case na to. bottom mesh and top glass panel on both sides. 1 bottom intake, 2 exhaust. since top glass pannel on both sides, it acts as a vacuum to exhaust all hot air from the case, at the same time, young low profile na CPU cooler getting cold air from the bottom mesh panel. same goes with the psu and GPU on the other side.

  • @enmaenmaenma123
    @enmaenmaenma123 Месяц назад

    if not okay for 2024, any recommendation aside nr200p po? or can you make video na list of your best and worst cases in 2024? thanks manong!

    • @bernardbautista6209
      @bernardbautista6209 Месяц назад +1

      best price you can get is maybe ZZAW C2P on almost the same footprint with better thermals

    • @enmaenmaenma123
      @enmaenmaenma123 Месяц назад

      @bernardbautista6209 thanks sirr

    • @enmaenmaenma123
      @enmaenmaenma123 Месяц назад

      @bernardbautista6209 matx yan dba sir c2p?

    • @manongunboxing
      @manongunboxing  Месяц назад +1

      Best and worst - by end of year.

    • @enmaenmaenma123
      @enmaenmaenma123 Месяц назад

      @@manongunboxing yann sama mo na lahat manong sa end of yr haha

  • @dominckrafa2714
    @dominckrafa2714 Месяц назад

    smallest matx case? any suggestions

    • @manongunboxing
      @manongunboxing  Месяц назад

      For smallest matx, that would mean: flex psu and low profile gpu… you can try sktc ux02. That’s around 7L

  • @mikesnowleopard
    @mikesnowleopard Месяц назад

    lian li q58 itx ko. pero di naman powerful mga components. just an asrock a620i and 7500f. im also using fsp650 watts and rx 6600. umaabot lang sa 70 yung max cpu temp ko when gaming. idle is at 44. nag install din kasi ako ng bottom fan as intake, then i replaced the top cover with a magnetic mesh filter na galing sa isang case ko. if sobrang init dito sa pinas, lite usage lang umaabot na temp ng 48.

    • @manongunboxing
      @manongunboxing  Месяц назад

      Replacing the top panel is a good idea. It blocks a lot of exhaust