There is not a single moment since I switched from Canon to Fuji a couple of years ago that when I encounter a doubt, this channel doesn’t give me the answer and in such an East’s and fun way. Let alone, the information itself is gold. You are definitely the GOAT when it comes to this, I would assume it applies specifically to people switching systems but maybe even Fuji users that had another system. Anyways, thanks for always helping me out. For the first time I need help after those two years with a monitoring issue and here you are delivering 🎉😊❤
I love your energy and I learn a lot from your videos. Anytime that I get stumped on an issue with my XT4, I come to your channel first. Thanks so much!
Great video, once again! The micro-HDMI (Type D) connector on my X-T2 indeed does look and feel so fragile, that I honestly use a SmallRig cage with a piece attached to that cage, keeping the HDMI cable plugged in there somewhat tightly into place, with almost no exception. It is better to minimize loss of signal too, but for me personally, like I just mentioned, is not even its primary reason for doing this. I have an older camera, and this method has been seemingly keeping it (the output) working for 2-3 years of moderate usage. But I am still afraid it could break literally any day. So yes, please change this connector type a.s.a.p. Fujifilm, on any future model (if the space allows for it, or whatever the reason of not already doing it now might be(??)).
Your videos are great. You are like a walking Fuji handbook. Whenever I can’t remember a setting, I refer to your videos on YT and don’t even bother with the reference book.
One huge bit with HDMI that wasn't mentioned was live streaming/webcam functionality. Running 4K HDMI to a capture card like the Blackmagic Intensity Pro 4K (screw Elgato, but I have an entire rant and several reasons for that) looks significantly better than any other webcam on the market. I've run my X-T3 for 12 hours straight before (accidently...) without any issues. Not to mention if you don't have an external recorder, running a capture card into OBS and recording (including straight to ProRes with the StreamFX plugin if you want) is a great substitute if you need unlimited recording time. Not as modular obviously, but if you're doing a studio recording of sorts, you can't go wrong.
@@paulgochoa Not without a capture card. The limitations with HDMI ports on laptops and desktops is that they're output only for displays, and they don't have a built-in way to convert the HDMI signal to something usable for the computer. Capture Cards convert the HDMI/SDI signal to USB or similar digital format that the computer can read, essentially as a webcam or capture device source.
8:20 the future is likely USB-C everything. So, I would expect camera to have simply one or more USB-C ports on cameras. Hopefully two is the minimum because as we have seen from laptops, you then need to buy all these adapters to get more ports out of the one.
I was struggling to understand why the hdmi info was still showing but watching this gave me a giant facepalm moment because I forgot the camera has to actually be in “video” mode and not picture mode. 🤦♂️ I can always count on pal2tech to save me in my fuji confusion.
I tried using a Lilliput external monitor on my XT4 but the micro HDMI cable kept falling off. Tried 2 different cable's and had the same experience. I guess a smallrig cage plus the smallrig cable clamp will solve this issue
Looks like the designers of HDMI micro are here to down vote this video. I caged my X-T3 and use the Smallrig A to D bolt on adapter for switching between studio and field monitors without having to touch the native port. Still afraid I will bump it one day.
Hi Chris, great video as always!!! I turn off the hdmi output info display on my XT3, but I still see all the camera information and menus on my external monitor (old tv in my case) What am I doing wrong??? Please help me Chris? Best Regards, Jerry. (from Belgium)
Are there significant differences between 4K standby and recording HDMI outputs? Sometimes I use my X-T30 as overhead camera for live streaming (online education). I set the standby quality to 4K and that's it. I did some tests and wasn't able to find any difference between 4K standby output and 4K recording output. Did I miss something? Even the time before temperature warning and shutting down were the same. In case you're interested: Used this way my X-T30 warns me about the temperature after 30 minutes and shuts down after 45 minutes. With a fan (5V USB) added to the camera it didn't even overheat after 8 hours nonstop recording.
@@jlsacman7224 Without an external fan my X-T200 showed a warning after 15 minutes and shut down after ca. 40 minutes. With an external fan (again a 120mm modded to 5V USB) it shows a warning after 2 hours, but lasts at least 6 hours without shutting down. In general though the X-T200 seems to get hotter than the X-T30 (or has lower temperature limits).
Pal2Tech, your videos are the best because you are extremely entertaining, knowledgable, and easy to understand. My question to you is: How come I cannot record 4K signals with my X-H2, x-H2s, and X-S10 thru HMDI? There is no longer an option in the menu system anymore to direct 4K signals to HDMI. Am I missing something? That menu no longer includes HDMI to 4K with fuji cameras. Am I missing something?
Hello, I have the Finepix HS20EXR and when I plug A monitor with the mini HDMI that has the camera I can only see when I press the playback buttton the pictures and videos I made and nothing else!!! No live signal from the camera and the monitor says no signal!! When I press again the playback button then the monitor goes on again and I can see the pictures I took!!! I can't find anything in the settings menu! Do have any advice pls?? thanks.
Fantastic Video, as always. Prof. Fuji, you simplified this so well that I'm tempted to get one and try recording 10bit footage. Never had the conviction to level up to 265HEVC 10bit etc.
Love what I'veve just learned here! I wish I could afford the Atmos Ninja for it seems to have more options to shoot continuously at one go. Thanks, Chris!
Anyone know if you can shut off the XT3 LCD screen when using HDMI to a field monitor - maybe save a little battery life that way? When I go through the display options (EV Only, LCD Only, etc) - when in LCD Off - it shuts off my field monitor view as well :-(
4:20 or until the camera overheats, right? Will the Fujifilm App also let you begin recording with the Ninja V in use? I think that would be optimal to minimize any shake. How about time sync over HDMI with the Ninja V? Thank's man. I can grab a Ninja V from a friend in exc. condition for $250 and might just plunk down today for it.
As a subscriber, I love your videos. Please do a detailed video on external recording. Mainly because of the 30 minus restriction, and also because of camera heating at 4K 60 ... Is the Atomos Ninja V really worth it, or should one jut get the H X 2s instead ???
Great video! Sadly, my X-T2 ignores the Clean-HDMI output setting, if it is connected to USB too! I.e., if it runs from battery, clean HDMI is possible. If it is charged via USB, clean HDMI does NOT work. Can someone please confirm or have a workaround?
Any way to get live HDMI output from the HS50 EXR? I really love the camera but would love it more if I could get the live HDMI output. Works for reviewing but not in shoot mode or while filming.
Hi! Is there somewehere a place to find if a camera has Hdmi out or not ? My question is about the Fuji X-m1. I'm pretty sure you know the answer by the way.. Thanks
I set up my system almost exactly like you are doing and it works great. The only problem I'm having is that when I hit the shutter release to stop recording on the Ninja V it drops a frame. Have you ever experienced that? Love your channel!
Can I do this without the little video monitor in the middle of the chain? I just want to capture my camera's menus on my Mac like a screenshot, no video
I use an atomos shinobi for stills. I just got my fuji today and I cant find any HDMI output settings in shooting mode. So now whenever I press the preview button the monitor says 'no signal' for a minute then it works. How can I setup my still shot settings HDMI output to 1080p? THANKS!!!!!
Awesome 👏 as always. Can I just have a desktop monitor just for reference while I am recording myself? I am gonna start doing videos but I will be SOLO recording myself, so I need to see if I will be in focus. If yes I guess I will need to buy a micro hdmi cable right.
Hi, I know this is an old video, but I’m hoping you see this message, I’ve just bought a monitor for my Fuji xh2s and can’t get it to view on the monitor, just wanted to see if you might be available to suggest something before I send the monitor back, thanks
hi ! my client wants me to connect my FUJI XT-3 to their macbook, and use the macbook as a monitor for a videoshoot. Is this possible by buying a simple micro-HDMI to HDMI cable ? Is it possible to use a macbook as a monitor for fujifilm xt-3 camera ? What do I need ?
HDMI Output INfo Display is set to "Off" but running my xt3 with ElgatoCamLink4k into OBS I am still seeing the UI and its driving me crazy. Is there something I'm missing????
Hi. Thank u for this channel. This is very helpful for me. I would like to ask if i can use the hdmi port for tethering? Because at the same time I want to use the usb c directly to power wall outlet. Thank u.🙂
is it possible to connect directly from camera to a monitor (computer screen or a laptop with hdmi input) for live view using solely a micro Hdmi2Hdmi cable? Without external monitor/recorder in between.
Thanks for all that. I got another issue tho… i have hdmi output info off and it works, but when I turn on the gimbal which is connected to the camera as well, I see everything of the camera on the monitor and the log also disappears… and also an issue is, when record with the monitor, the camera thinks it does not record and drops frames of the display but I have turned on the hdmi recording control…
My brain is overloaded with all these options. All I want to know is HOW DO I MONITOR F-LOG FOOTAGE from my XT2? When I connect an external monitor to my xt2...screen goes black when camera is set to F-Log. Is this a problem with all budget monitors? Or is this problem exclusive to Fuji? Is the Ninja my only option? Is there a budget monitor out there that will work with Fuji F-Log?
Hello! For still photography, would you know how to get an uncropped HDMI output when connected to an external monitor? When I set the mode to anything other than movie mode, it goes back to 1080p with 2 black panels on the sides. How do I fix this?
I am considering an external SSD storage, will a high speed Samsung T5 work with the x-t3 or xs10 camera, any specific micro HDMI to USB C cable type I will need to get 10 bit out of the xs10? Thank you
Hi :) I got serious question but it is little off topic. I bought DJI RSC 2 gimbal. I balanced my XT-4 and when I plug usb to usb c cable to camera and gimbal (I plugged it to very right port on gimbal) camera is going crazy from normal screen to screen when I see USB icon and black screen. It is switching those 2 screens every 2 seconds non stop. Do you know why or what to do? I cannot find it on internet so I hope maybe you have some experience to help me. Thanks :)
Hello Chris, I am trying to establish if there is an issue with the way my xt-4 communicates with my Atomos Ninja. Can you tell me if I should be able to see the various info like fstop, shutter speed etc which I can see on my xt4 monitor displayed on my Ninja? As it stands that information doesn't appear and so I have to open up my screen and make adjustments on my xt-4 when I want to change fstop etc. Also, do you know if there is a way to eliminate all the icons on the Atomos Ninja so that you can see that info (if I can get it to work) so that the icons on the Ninja are not blocking the info from the camera? Kind of like what I see at the 1'26" second of your video here. Thanks in advance, I know you are crazy busy.
can you tell the x-t3 to send high resolution (4k) over HDMI while in photo mode? i only get 4k while in movie mode. photo mode has lousy image quality/resolution over hdmi
Hi Chris! My name is Lee and I just want to start by thanking you very much for all of the videos you have made for us Fuji Phanatics!! Anyway, I have an issue and I'm sure where to post this, so I will try here! I have an XT4 camera body and I am wanting to make some video recordings using a Camlink 4K with my PC ... and using Fujifilm's 4K Capture Utility software! The computer far surpasses the requirements for using the Camlink 4K capture device. I am able to use the program and capture device to make a video recording except for one problem ... I cannot get the audio to playback! During recording, the virtual VU meters are showing audio activity in the bottom right side of the program, but absolutely no playback of this audio with the recording. I have been trying everything Chris and am at a total loss. I was just wanting to ask if you can suggest anything. I contacted Elgato about this, but not getting much help at all! I am able to record videos on OBS and even get the audio to playback as well, but not with the 4k Capture Utility! Thanks for reading this and look forward to more of your videos in the future!
I have a couple of questions I hope you can help me with. I have 2 X-T4s and recently started shooting video for my RUclips with them. My first issue is when in Movie mode my shutter buttons does NOT start recording. 2. Today I tried to new my new Andycine monitor with my X-T4 and for some reason when the monitor was only hooked up using HDMI cable I could not use the Fujifilm XApp to control the camera as it kept telling me something else was using it's WiFi network when nothing else was. I am assuming I have a setting wrong somewhere and hope you can help me. I have been enjoying your videos for some time now.
Hi, I own a Fujifilm X-T4 camera and will be using it to film an interview. My clients are overseas and would like to get a live feed from my camera. I was wondering, is it possible for me to use the X-T4 as a webcam WHILE recording to my sd card inside the camera? Is there another workaround for this if not possible?
great info / vid Chris!! The Fuji manual for HDMI cable it says not to use a cable longer than 4.9 feet / 1.5 m. I would like to keep the length down to 18” 24” if possible. My Question is where is a good place to get a smaller hdmi cable with standard A to micro D - your link gives a 3’ minimum with that choice of cable - if using the monitor on top of your camera or right off the side attached to a tripod 3 ft is kinda a lot of extra unneeded cable. I agree as well as to the micro D port, NO bueno fujifilm!! thanks for any additional input as to options At the moment i would be just using the monitor to shoot stills - macro, landscapes, and then hopefully move more into some wildlife video. Would the settings be the same for the monitor in the menu setup for stills as it would for movie use? Thanks again for any help 🙏🏼
How can I record directly to my PC with an Elgato 4k CamLink? I am receiving the video as a camera input I guess, but there are also analog artifacts like moving waves.
These horizontal lines are also apparent on the camera lcd screen. I am guessing the HDMI output is showing me the camera screen. Any idea how can I record 4k60 to my PC simultaneously? Thanks.
Ok after a quick research I think the problem is "rolling shutter distortion". But Why do I only experience it on camera LCD and HDMI Output and not SD Card recording?
Ok another update :D Reducing the shutter speed fixed the flicker effect but now the shutter speed (30) is way to low for my desired video fps (24fps). Commencing further research...
Hi Can somebody help me on a question.. I am a first time fuji user and on xt3 wd 23mm f2 lens when i zoom and try to capture it just takes zoom out shot. am i doing any set up wrong. any help is appreciated. How can i zoom to take pictures
Hi pal2tech, I was really hoping this video would address the issues I'm having, but sadly they don't. When I enable "HDMI OUTPUT INFO DISPLAY" the resolution sent to my HDMI monitor is lower than when I disable it. Have you encountered this problem? I would love to have the info display to view my AF and shutter settings, but I really can't tell if my focus is right when the resolution is the same as my Fuji flippy screen.
If I am recording externally-only (computer or recorder) and have the standby set to 4K, is there any difference to what the camera is putting out over HDMI “at rest” versus when I hit “record”?
Great video! I’m an actor and I’m looking for a display screen for indoor self tape auditions. I also want to us my external directional mic. It sits on top of the camera, but it looks like the display monitor goes where the directional mic is currently sitting. Is there a setup where i can have both or do I need to get a separate Mic stand? Thanks in Advance :-)
If I use a HDMI to USB converter like the ELGATO CAMLINK 4K, would I be able to record 4K into the Mac through Quicktime? Also would the shutter button trigger the recording? Asking without trying it. However, will try and update too. Thank you
You could do that through OBS, which would be a better option in all honestly. Significantly more recording options with FFmpeg extensions. Including recording straight to ProRes if you download the StreamFX plugin.
I'll assume playback in 4k to a monitor won't heat up the battery or camera like filming in 4k. I see Da Crafs'man uses Fuji battery adapters that plug into the wall. Gotta find those.
There is not a single moment since I switched from Canon to Fuji a couple of years ago that when I encounter a doubt, this channel doesn’t give me the answer and in such an East’s and fun way. Let alone, the information itself is gold.
You are definitely the GOAT when it comes to this, I would assume it applies specifically to people switching systems but maybe even Fuji users that had another system.
Anyways, thanks for always helping me out. For the first time I need help after those two years with a monitoring issue and here you are delivering 🎉😊❤
I love your energy and I learn a lot from your videos. Anytime that I get stumped on an issue with my XT4, I come to your channel first. Thanks so much!
Great video, once again!
The micro-HDMI (Type D) connector on my X-T2 indeed does look and feel so fragile, that I honestly use a SmallRig cage with a piece attached to that cage, keeping the HDMI cable plugged in there somewhat tightly into place, with almost no exception.
It is better to minimize loss of signal too, but for me personally, like I just mentioned, is not even its primary reason for doing this.
I have an older camera, and this method has been seemingly keeping it (the output) working for 2-3 years of moderate usage. But I am still afraid it could break literally any day.
So yes, please change this connector type a.s.a.p. Fujifilm, on any future model (if the space allows for it, or whatever the reason of not already doing it now might be(??)).
You’ve done it again, Crystal clear delivery, brilliant stuff.
Your videos are great. You are like a walking Fuji handbook. Whenever I can’t remember a setting, I refer to your videos on YT and don’t even bother with the reference book.
One huge bit with HDMI that wasn't mentioned was live streaming/webcam functionality. Running 4K HDMI to a capture card like the Blackmagic Intensity Pro 4K (screw Elgato, but I have an entire rant and several reasons for that) looks significantly better than any other webcam on the market. I've run my X-T3 for 12 hours straight before (accidently...) without any issues. Not to mention if you don't have an external recorder, running a capture card into OBS and recording (including straight to ProRes with the StreamFX plugin if you want) is a great substitute if you need unlimited recording time. Not as modular obviously, but if you're doing a studio recording of sorts, you can't go wrong.
Can I record in camera while it's connected to my laptop via micro-HDMI?
@@paulgochoa Not without a capture card. The limitations with HDMI ports on laptops and desktops is that they're output only for displays, and they don't have a built-in way to convert the HDMI signal to something usable for the computer. Capture Cards convert the HDMI/SDI signal to USB or similar digital format that the computer can read, essentially as a webcam or capture device source.
8:20 the future is likely USB-C everything. So, I would expect camera to have simply one or more USB-C ports on cameras. Hopefully two is the minimum because as we have seen from laptops, you then need to buy all these adapters to get more ports out of the one.
I completely agree about micro-hdmi - it needs to go away. Thanks for all these helpful tips and explanations about HDMI on Fuji cameras!
Prof. Fujifilm is the right title for you! Thanks for this video!
I was struggling to understand why the hdmi info was still showing but watching this gave me a giant facepalm moment because I forgot the camera has to actually be in “video” mode and not picture mode. 🤦♂️ I can always count on pal2tech to save me in my fuji confusion.
I tried using a Lilliput external monitor on my XT4 but the micro HDMI cable kept falling off. Tried 2 different cable's and had the same experience. I guess a smallrig cage plus the smallrig cable clamp will solve this issue
Yeah, you almost have to use smallrig clamps or similar. I will probably get into that issue alone in an upcoming video. 👍
@@pal2tech wanted to add to use some sort of cage and clamp for the HDMI but you are making a video about that :) glad to hear it.
Amazing!! I really appreciate this!
Looks like the designers of HDMI micro are here to down vote this video.
I caged my X-T3 and use the Smallrig A to D bolt on adapter for switching between studio and field monitors without having to touch the native port. Still afraid I will bump it one day.
This is one of those 'aaaahhhhhhhhhhhh' moments as I finally understand what 'clean HDMI' actually means! Du-oh! Thanks! 👍😁
For those who have problem with HDMI control triggering the Atomus ninja V, set "trigger HDMI" on Atomus
Hi Chris, great video as always!!!
I turn off the hdmi output info display on my XT3, but I still see all the camera information and menus on my external monitor (old tv in my case)
What am I doing wrong??? Please help me Chris?
Best Regards, Jerry. (from Belgium)
I had the same problem and it was the "video mode". You need to be in "video mode" to not have this info.
@@rafaelcenson 👍👌👍 THNX RHC!!!
1:14 Biotron!!! Sorry to go off topic--just had a fun flashback to my childhood.
4:20 also some cameras like my X-T200 will overheat way before the battery dies or the SD is filled.
Are there significant differences between 4K standby and recording HDMI outputs?
Sometimes I use my X-T30 as overhead camera for live streaming (online education). I set the standby quality to 4K and that's it. I did some tests and wasn't able to find any difference between 4K standby output and 4K recording output. Did I miss something? Even the time before temperature warning and shutting down were the same.
In case you're interested: Used this way my X-T30 warns me about the temperature after 30 minutes and shuts down after 45 minutes. With a fan (5V USB) added to the camera it didn't even overheat after 8 hours nonstop recording.
Hi, is this applicable also on XT200?, Coz my xt200 overheats after 15mins and shutdown
@@jlsacman7224 Without an external fan my X-T200 showed a warning after 15 minutes and shut down after ca. 40 minutes. With an external fan (again a 120mm modded to 5V USB) it shows a warning after 2 hours, but lasts at least 6 hours without shutting down. In general though the X-T200 seems to get hotter than the X-T30 (or has lower temperature limits).
@@SCEmissary how did you apply the fan to the camera? I’ve got a X-T4 and I’m running the same overheating issue
Hi
I would love to see an updated video with the X-T5 and Atomos Ninja V+
Is there any chance you can make one?
Great video as always. You are right! Ditch the micro! Best use of HDMI? Livestream and Zoom events.
Can I record video to the sd card on fujifilm xt4 WHILE streaming? Do I need extra gear to connect the hdmi to the mac?
We are lucky to have you, thanks so much for your sharing.
Outstanding video! You've saved me a whole bottle of Aspirin!!! Thanks.
Pal2Tech, your videos are the best because you are extremely entertaining, knowledgable, and easy to understand.
My question to you is: How come I cannot record 4K signals with my X-H2, x-H2s, and X-S10 thru HMDI?
There is no longer an option in the menu system anymore to direct 4K signals to HDMI. Am I missing something? That menu no longer includes HDMI to 4K with fuji cameras.
Am I missing something?
You are the best man !
I love watching your videos..you made learning so much entertaining!
Hi, the HMDI connection in my XPRO 2 only works in playback mode. Is there anything that I could do to use in live view mode too?
My monitor works well in photo mode, but in video mode screen turns black and only audio comes out helppp
Amazing information. Thanks for sharing!
Great video! Earned my sub with your humour and knowledge!!
Anyone use a Macbook Pro as an external monitor to an XT3? Wondering what's the best software to use to view the live screen?
It would be so great if we could see and control camera settings via external recorder and also have clean feed for recordings
Agree!
Excellent content, thank you. Please dial down the enthusiasm a notch, or ten.
Hello, did you ever had overheating problems with the Ninja V and Fujifilm X-T4? Great video!
Hello, I have the Finepix HS20EXR and when I plug A monitor with the mini HDMI that has the camera I can only see when I press the playback buttton the pictures and videos I made and nothing else!!! No live signal from the camera and the monitor says no signal!! When I press again the playback button then the monitor goes on again and I can see the pictures I took!!! I can't find anything in the settings menu! Do have any advice pls?? thanks.
Fantastic Video, as always. Prof. Fuji, you simplified this so well that I'm tempted to get one and try recording 10bit footage. Never had the conviction to level up to 265HEVC 10bit etc.
Such an informative channel. Thanks
And I'm curious which codec (264 / 265 ) is worked when I use external screen by HDMI?
Love what I'veve just learned here! I wish I could afford the Atmos Ninja for it seems to have more options to shoot continuously at one go. Thanks, Chris!
Anyone know if you can shut off the XT3 LCD screen when using HDMI to a field monitor - maybe save a little battery life that way? When I go through the display options (EV Only, LCD Only, etc) - when in LCD Off - it shuts off my field monitor view as well :-(
Hi Pal2tech - do you have a current video on HDMI for the XT5? Noticing my menu is significantly different to this! :)
Hey! Do you need an external monitor to connect the camera to a bigger monitor like a TV or computer monitor?
Great video as always! Can you also do some lighting review for photography and video?
4:20 or until the camera overheats, right? Will the Fujifilm App also let you begin recording with the Ninja V in use? I think that would be optimal to minimize any shake. How about time sync over HDMI with the Ninja V? Thank's man. I can grab a Ninja V from a friend in exc. condition for $250 and might just plunk down today for it.
As a subscriber, I love your videos. Please do a detailed video on external recording. Mainly because of the 30 minus restriction, and also because of camera heating at 4K 60 ... Is the Atomos Ninja V really worth it, or should one jut get the H X 2s instead ???
Great video!
Sadly, my X-T2 ignores the Clean-HDMI output setting, if it is connected to USB too!
I.e., if it runs from battery, clean HDMI is possible. If it is charged via USB, clean HDMI does NOT work.
Can someone please confirm or have a workaround?
Any way to get live HDMI output from the HS50 EXR? I really love the camera but would love it more if I could get the live HDMI output.
Works for reviewing but not in shoot mode or while filming.
Hi! Is there somewehere a place to find if a camera has Hdmi out or not ? My question is about the Fuji X-m1. I'm pretty sure you know the answer by the way.. Thanks
Sad that they removed it in the X-H2S.
Thank you very very much…. Always want to know what is HDMI for!!!
I set up my system almost exactly like you are doing and it works great. The only problem I'm having is that when I hit the shutter release to stop recording on the Ninja V it drops a frame. Have you ever experienced that? Love your channel!
I already have a Feelworld external monitor. What do you recommend for a recorder? Perhaps an idea for a future video.
Love your enthusiasm.
quick question, if im using HDMI, is it possible to view playback both on camera LCD and external monitor? im using Fujifilm XT20
can i use my phone as external monitor?
Can I do this without the little video monitor in the middle of the chain? I just want to capture my camera's menus on my Mac like a screenshot, no video
I use an atomos shinobi for stills. I just got my fuji today and I cant find any HDMI output settings in shooting mode. So now whenever I press the preview button the monitor says 'no signal' for a minute then it works. How can I setup my still shot settings HDMI output to 1080p? THANKS!!!!!
Awesome 👏 as always. Can I just have a desktop monitor just for reference while I am recording myself? I am gonna start doing videos but I will be SOLO recording myself, so I need to see if I will be in focus. If yes I guess I will need to buy a micro hdmi cable right.
Do the Fuji fin xt4 have clean hdmi output trying to see if I can stream with the camera
Hi, I know this is an old video, but I’m hoping you see this message, I’ve just bought a monitor for my Fuji xh2s and can’t get it to view on the monitor, just wanted to see if you might be available to suggest something before I send the monitor back, thanks
hi ! my client wants me to connect my FUJI XT-3 to their macbook, and use the macbook as a monitor for a videoshoot. Is this possible by buying a simple micro-HDMI to HDMI cable ?
Is it possible to use a macbook as a monitor for fujifilm xt-3 camera ? What do I need ?
HDMI Output INfo Display is set to "Off" but running my xt3 with ElgatoCamLink4k into OBS I am still seeing the UI and its driving me crazy. Is there something I'm missing????
Hi. Thank u for this channel. This is very helpful for me. I would like to ask if i can use the hdmi port for tethering? Because at the same time I want to use the usb c directly to power wall outlet. Thank u.🙂
is it possible to connect directly from camera to a monitor (computer screen or a laptop with hdmi input) for live view using solely a micro Hdmi2Hdmi cable? Without external monitor/recorder in between.
Can I use my fujifilm xa3 on my TV as a view finder? or the only thing i can do is to view photos on the TV? :(( i hope to be answered
Great attention to detail as always and thank you for the knowledge even though I feel like you still sold me a car lol.
is there a way to mirror the hdmi output display?
is it possible to buy a usb c to hdmi adapter to avoid using the micro hdmi?
Can you use a TV as a live shooting monitor for video? Xh2s here.
De Perú las gracias.
Thanks for all that. I got another issue tho… i have hdmi output info off and it works, but when I turn on the gimbal which is connected to the camera as well, I see everything of the camera on the monitor and the log also disappears… and also an issue is, when record with the monitor, the camera thinks it does not record and drops frames of the display but I have turned on the hdmi recording control…
My brain is overloaded with all these options. All I want to know is HOW DO I MONITOR F-LOG FOOTAGE from my XT2? When I connect an external monitor to my xt2...screen goes black when camera is set to F-Log. Is this a problem with all budget monitors? Or is this problem exclusive to Fuji? Is the Ninja my only option? Is there a budget monitor out there that will work with Fuji F-Log?
hi i want to do the same thing with an iPad/tablet android..is it possibile (not fuji app, too buggy)
whats the price to fix xt3 hdmi connection?
Hello! For still photography, would you know how to get an uncropped HDMI output when connected to an external monitor? When I set the mode to anything other than movie mode, it goes back to 1080p with 2 black panels on the sides. How do I fix this?
can you do HDMI out and at the same time tether to a computer?
HI Chris... Good Job.. You didn't mention if there is an option to record the fuji colors like Eterna out of the HDMI, can you comment?
I am considering an external SSD storage, will a high speed Samsung T5 work with the x-t3 or xs10 camera, any specific micro HDMI to USB C cable type I will need to get 10 bit out of the xs10? Thank you
I love brutal demonstration....
Hi :) I got serious question but it is little off topic. I bought DJI RSC 2 gimbal. I balanced my XT-4 and when I plug usb to usb c cable to camera and gimbal (I plugged it to very right port on gimbal) camera is going crazy from normal screen to screen when I see USB icon and black screen. It is switching those 2 screens every 2 seconds non stop. Do you know why or what to do? I cannot find it on internet so I hope maybe you have some experience to help me. Thanks :)
Hello Chris, I am trying to establish if there is an issue with the way my xt-4 communicates with my Atomos Ninja. Can you tell me if I should be able to see the various info like fstop, shutter speed etc which I can see on my xt4 monitor displayed on my Ninja? As it stands that information doesn't appear and so I have to open up my screen and make adjustments on my xt-4 when I want to change fstop etc. Also, do you know if there is a way to eliminate all the icons on the Atomos Ninja so that you can see that info (if I can get it to work) so that the icons on the Ninja are not blocking the info from the camera? Kind of like what I see at the 1'26" second of your video here. Thanks in advance, I know you are crazy busy.
can you tell the x-t3 to send high resolution (4k) over HDMI while in photo mode? i only get 4k while in movie mode. photo mode has lousy image quality/resolution over hdmi
Hi Chris! My name is Lee and I just want to start by thanking you very much for all of the videos you have made for us Fuji Phanatics!!
Anyway, I have an issue and I'm sure where to post this, so I will try here!
I have an XT4 camera body and I am wanting to make some video recordings using a Camlink 4K with my PC ... and using Fujifilm's 4K Capture Utility software!
The computer far surpasses the requirements for using the Camlink 4K capture device. I am able to use the program and capture device to make a video recording except for one problem ... I cannot get the audio to playback! During recording, the virtual VU meters are showing audio activity in the bottom right side of the program, but absolutely no playback of this audio with the recording. I have been trying everything Chris and am at a total loss. I was just wanting to ask if you can suggest anything. I contacted Elgato about this, but not getting much help at all! I am able to record videos on OBS and even get the audio to playback as well, but not with the 4k Capture Utility!
Thanks for reading this and look forward to more of your videos in the future!
I have a couple of questions I hope you can help me with. I have 2 X-T4s and recently started shooting video for my RUclips with them. My first issue is when in Movie mode my shutter buttons does NOT start recording. 2. Today I tried to new my new Andycine monitor with my X-T4 and for some reason when the monitor was only hooked up using HDMI cable I could not use the Fujifilm XApp to control the camera as it kept telling me something else was using it's WiFi network when nothing else was. I am assuming I have a setting wrong somewhere and hope you can help me. I have been enjoying your videos for some time now.
Hi, I own a Fujifilm X-T4 camera and will be using it to film an interview. My clients are overseas and would like to get a live feed from my camera. I was wondering, is it possible for me to use the X-T4 as a webcam WHILE recording to my sd card inside the camera? Is there another workaround for this if not possible?
great info / vid Chris!! The Fuji manual for HDMI cable it says not to use a cable longer than 4.9 feet / 1.5 m. I would like to keep the length down to 18” 24” if possible. My Question is where is a good place to get a smaller hdmi cable with standard A to micro D - your link gives a 3’ minimum with that choice of cable - if using the monitor on top of your camera or right off the side attached to a tripod 3 ft is kinda a lot of extra unneeded cable. I agree as well as to the micro D port, NO bueno fujifilm!!
thanks for any additional input as to options
At the moment i would be just using the monitor to shoot stills - macro, landscapes, and then hopefully move more into some wildlife video. Would the settings be the same for the monitor in the menu setup for stills as it would for movie use? Thanks again for any help 🙏🏼
How can I record directly to my PC with an Elgato 4k CamLink? I am receiving the video as a camera input I guess, but there are also analog artifacts like moving waves.
These horizontal lines are also apparent on the camera lcd screen. I am guessing the HDMI output is showing me the camera screen. Any idea how can I record 4k60 to my PC simultaneously? Thanks.
Ok after a quick research I think the problem is "rolling shutter distortion". But Why do I only experience it on camera LCD and HDMI Output and not SD Card recording?
Ok another update :D Reducing the shutter speed fixed the flicker effect but now the shutter speed (30) is way to low for my desired video fps (24fps). Commencing further research...
Hi Can somebody help me on a question.. I am a first time fuji user and on xt3 wd 23mm f2 lens when i zoom and try to capture it just takes zoom out shot. am i doing any set up wrong. any help is appreciated. How can i zoom to take pictures
Hello. How long should be hdmi cable normaly?
I keep hearing people make mention about frying their hdmi port on their cameras. How is that avoided?
Hi pal2tech, I was really hoping this video would address the issues I'm having, but sadly they don't.
When I enable "HDMI OUTPUT INFO DISPLAY" the resolution sent to my HDMI monitor is lower than when I disable it.
Have you encountered this problem? I would love to have the info display to view my AF and shutter settings, but I really can't tell if my focus is right when the resolution is the same as my Fuji flippy screen.
i regret getting my Fujifilm X-T100 it doesnt have any of those options but still has an HDMI port D:
How to Connect XT20?
If I am recording externally-only (computer or recorder) and have the standby set to 4K, is there any difference to what the camera is putting out over HDMI “at rest” versus when I hit “record”?
Same question - in this mode with standby quality set to 4K I seem to get 4K video in ECAMM Live but only 1080p in QuickTime Player. Confusing!
"Micro HDMI sucks!" pal2tech 🙌
Great video! I’m an actor and I’m looking for a display screen for indoor self tape auditions. I also want to us my external directional mic. It sits on top of the camera, but it looks like the display monitor goes where the directional mic is currently sitting. Is there a setup where i can have both or do I need to get a separate Mic stand? Thanks in Advance :-)
Does Xt2 have clean HDMI? thanks
Hi! How meny ms latency has the HDMI output on xt-4?
If I use a HDMI to USB converter like the ELGATO CAMLINK 4K, would I be able to record 4K into the Mac through Quicktime? Also would the shutter button trigger the recording? Asking without trying it. However, will try and update too. Thank you
You could do that through OBS, which would be a better option in all honestly. Significantly more recording options with FFmpeg extensions. Including recording straight to ProRes if you download the StreamFX plugin.
I'll assume playback in 4k to a monitor won't heat up the battery or camera like filming in 4k. I see Da Crafs'man uses Fuji battery adapters that plug into the wall. Gotta find those.