DDAE Sunroof Installation II
HTML-код
- Опубликовано: 25 авг 2024
- The friendly folks at DDAE show us another sunroof installation. This time its on a late model Dodge Charger. Learn as you watch so you to can cut a hole in your perfectly good car's roof. There is nothing like a sun roof, so get a cold beer, your tools and get to it.
I would only point out three things as a sunroof fitter for the last 40 years 1/ we use an air-chisel to cut a small v cut opening in the middle of the cut out area NO fillings at all . 2/ From day one when using a shear to cut the roofs { best tool in the world for us sunroof installers} we were shown by the sunroof manufacturers {Holandia now Webasto to cut in an anti clockwise direction , the way the shear is designed it will force the salvaged metal up and away so there is no distortion on the remaining roof skin . Last one sealant is always applied to the underside of the sunroof frame not onto the roof itself , I suppose that one is not compulsory but it is a better way to appply without dripping sealant onto the seats etc .
Hey Howard. Great comment, not enough constructive comments cz every1 is so sensitive about finding out they were less than perfect. I need help anyway, I was hoping you could, and were willing.....
I drive a '10 RAM Laramie C/C Shortbase 5.7L.......So, with the moonroof up, I backed into a commercial garage door opener(spotter said, "Clear!". lol) and it broke the sliding arm/connector/ t-track on one side. It functioned for a while, just fine if I pulled that corner down a bit just as it was closing. I had kept the 'T' for awhile but my toolbox got stolen a couple weeks ago, so I don't have it:( .......At some point the other side came off the track and I could lift the glass right out, with no power. Just sat in there. Everything still works great, motor, tracks, very clean, but ofc it doesn't take the glass with it. Always stayed dry.
My questions: 1. Can you buy just the plastic arms? with the 'T' or separate?
2. I checked out the Pik-n-Pull. (Not a single truck with a sunroof); I was walking out and there was a Caddy CTS.... with a sunroof. I know it sounds stupid, but the more I looked at it the more I was convinced it was the same unit, or at least the frame and glass, the arms I wasn't sure. The overall fit, I didn't have a tape with me, so I don't know. I found the parts on Rock Auto, Mopar and GM but they don't have the specs with them........ So, Are these arms somewhat universal? The roofs themselves? Or maybe1 or 2 manufacturers that coincidentally end up with the same parts in some vehicles?
3. Do I need to remove the whole frame assembly to make this repair? (Already have the liner off)
Hope I'm not putting you on the spot, i'm getting desperate, been 2yrs. Tx, either way.
Regards,
Thanks Howard for the pointer. We will try that next time. Thanks for watching BDP
Excellent job. No issues installing sunroof even for a brand new vehicle, as long as done by a professional, as seen in this video....
Great advice!! Read twice and cut once!!! Thanks!
This sunroof seems like it would be good in my 95 chevy would match the era with my rear side window
He made the cutting look easy. I'm a little less nervous about that bit now.
Where is the mention of ANYTHING he used, though? This is more of an ad than a how-to.
Thank you for uploading this. I just bought a replacement sunroof which is pretty much exactly the same as yours and i was wandering how to fit it. Mine did come with a few rolls of different sealant tape but it looks like its not needed if you just use tube sealant.
Excellent video!
5 star
Oh man.. i wouldn't stay around to see them make a hole in my roof. the thought alone makes me sweat buckets..
Excellent
Good job. Clean neat
Professional
Might get one, then wrap it so the sun doesn't shine in. No air con in the old ute, and I like the look of a pop up sun roof.
gode jop ....col from algiria..... merci pour votre travail et je suis très contente pour BMW
Wow that was super easy 🕺🏽
I feel like I need to practice this a few times b4 I go and try to make a job of doing this... but u make it look easy... Just curious how long does an average job take you to do?
WELL DONE GUYS!!!!!
Ya'll should have done a water test to be sure it doesn't leak.
maybe they did you opinionated person
Johnathon Wheeler maybe they didn't you opinionated person
@@aldomedina7396 maybe they didn't you opinionated person
@@workingman7865 but how could we know right
Can test for water leaks when silicon sealant dries
What brand of sunroof kit was that? I would like to install one in my 79 f150?
How to do this with an electric one and or make a panoramic sunroof?? :) I have new Sonata Hybrid and want to put panoramic in it if possible?? any suggestions ?? :)
What kind of tool was that? The one they used to cut the roof with? Not the drill but right afterwards
Where can I buy the sun roof please
Gostei muito do acabamento.ficou perfeito
very good and cheap
Great installation video, I recently installed the same sun roof on my car except mine didnt come with the finish trim gasket, do you know if they sell it separately?
What sunroof did you use and where did you buy it from
hola .... amigo aunque no domino bien el ingles pero muy bueno ese video una consulta cuanto te costó ese sunroof y que modelo es
from were did you get the glass if the sunroof that you put it
what kind of sealant is the one you used between the body and the sunroof frame. thanks
tres beaux travaille
can you tell me please where did you buy this item i try on ebay but can't find him
Fixed sunroof or this wrk, i mean glass move by buttos.
What kind of glue or name of the brand??.. thanks...
Por favor en donde lo puedo conseguir
Superb uncle
what cutting tool are you using?
I like it 👌
Im installing a CRL 20x32 sunroof in my el camino the only thing unsure of is when u apply the clear waterproof caulk and lay the top frame down... do you then go ahead and mount the bottom frame right away or do you let the top frame and caulk dry and seal before mounting the bottom frame???
All of these leak. I had one on my old civic now I'm deleting it with a piece of aluminum and riveting it on
Not my experience, maybe different factors play into that. Had an aftermarket sunroof like this installed in my '87 VW Golf GT in '88...sold it in '92 and it was still like new....never any leaks. Aside from the ground effects install, the sunroof was one of the best things I did to it. Lot of fun.
Hello, Good video, I Have a Charger R/T...
Whats the cost of putting a sunroof in my car?
Big Madox depends on the vehicle but it start from 1500$..
Bonsoir sur quel site que je peux commander ce Kit de Trois ouvrant c'est pour que je puisse l'installer sur une 206 3 portes
/What city are you in?
ok job, you should have peeled the headliner back and tucked it. i installed roofs for about 6 years and i hated the look of the trim ring....
Thanks Rich, post one of your installs. Would love to see it. BDP
where can i get one of the kits/template????
I got same sunroof but the glass is like lose anyway I can fix it?
Where can i het this kit from? Already cut my roof now need glas and the rubber
What tool is that that he used to cut the roof?
Good eveniging an u teel me the company name, where you buy the sunroof, please
Better very good
I want one installed on my car. But to scared to do it myself.
Nice job, where can i buy a sunroof like this for my 2009 dodge ram? Thanks in advance
They have different sizes and styles on Amazon. C.R. Laurence is the brand name, I believe.
What was the tool other than the drill that you were using to cut into the roof it was slicing away like butter I need one. Please let me know.
Found it!
www.amazon.com/Gino-Development-01-0101-TruePower-Electric/dp/B00Z7Z8C6W/ref=sr_1_3?ie=UTF8&qid=1535157542&sr=8-3&keywords=nibbler+electric
Matt Ortwein thanks!
Where can I find these guys? I have a car that I want a sunroof installed. I'm in New England area.
Thanks for any helpful info.
How can I buy it how much?
It's better u buy a second hand car already attached to it rather than buying a new panaromic roof...cuz it gonna cost you £1000 for installation
nice - he used Silicone for the sealant...... the acid cause rust before he closed it the first time.....
Yes, only the best products are used a DDAE's shop.
Why does the sunroof have a radio intenna
On voit le joint blanc, à la 5'37''. ! 👀
great sense of humour kkkkk
Please, what kind of tool you use to cut the steel of the roof, looks real clean.
Эд Красный It looks like a powered metal cutting shears.
Thanks.
Se puede adquirir desde china ??
Subbed..because qualification from "Online" lol made my day. :D
You can see glue between the spaces on the roof line. This is one giant fuck up.
i like it
Eu mesmo estou fazendo o meu aque no brasil
The f-in music.... :-/ What kind of sealant?? Good video and thanks for posting
How much this
Where did you get the sunroof from?
They have similar sunroofs on Amazon in varying sizes.
hat kind of electric cutting tool is that you used
Johnnie whoa, that's a power shear. You can pick one up at Stop & Shop or KMart. Thanks for watching BDP
Couldn't believe that they spoiled such a good car
Yeah me too. Thanks for watching, I'm just the video guy. BDP
Bueno dias. Solicito informacion de un quema cocos mecanico como el que muestra en el video, para un automovil vocho sedan mexicano 20013
Yeah, absolutely. Thanks for watching....BDP
C.r. laurence the name
The out side looks like shit water is going to flow right in
Sir,
ये swift dzire मे भी लगा सकते हैं
और इसकी cost कतनी है
Ok...thanks for watching and for you comment...I think...BDP...over
سيارتي لم ياتي فيها فتحت سقف هل ينفع نعمل لها فتحت سقف.٢٠٠٧النتر هوندي
Just what he said. Thanks for the kind words and keep watching. All the best BDP
Money tot?
Buy him where I'm from Indonesia
من طرف اخي ضياع
Cost ???. Plzzz
Hi, cost was under $300 beans. Thanks for watching...BDP
First, get some quality hole saws for metal.
Firstly DO NOT use a hole saw , it will spread metal fillings all over the place and when your cutting if one metal filling gets under the cutting tool you will be up for a new paint job as it will scratch the SHIT out of the paint .
Hole saws will ruin the paint
Charger crying
Yeah is was more like screaming NOOOOOOOOO! Thanks for watching BDP
Pancin yoksa alayim
I need to know were can i come to add sunroof. anybody know any company name or address so i can add sunroof on my car.
That's pretty clearly a wood holesaw!
Stevie wins the prize....thanks for watching BDP
Stevie Howard bi- metal
Wey eso es lo que hicieron con el spark 😂😂😂😂
Cual spark?
Don't do this to any car.
Patrick O'Steen Why is that?
Zmansk88 OE sunroofs are made to fit the curvature of the car, so that they don't leak. They are also designed to reinforce the body of the vehicle, to replace the metal that is not present in a car with a sunroof. Cutting a hole and cramming a piece of glass into it is a big mistake.
+Patrick O'Steen cut your shit idea its not like that
+jojo jet I make sunroofs for a living, so I'm very well informed on this subject.
sorry to say i did this to any car
exterior doesnt look good. water is gonna leak.
webasto is the best
djextremoo ઊઊ
It did leak and we ended up cutting the roof off completely. I forgot to install my SIM in the camera and did not get the video. Will try again next time. Thanks for your comments keep watching. BDP
Ow not no 😪😰😨😱😰😥😓😓😓😭😢
➕👕👏
Unprofessional sealed this is going to leak 100%
Too bad
Very bad looking from outside I mean the Rubber look very cheap
Thanks for the comment. Yeah it’s a POS. All the best BDP.
Looks like S***
all money not good money. you just lost potential customers by installing that pop up roof... very sad day for gear heads
Horrible
Thanks for the kind words.