A quick review of the ACEDC Milk Cap
HTML-код
- Опубликовано: 6 май 2024
- Join this channel to get access to perks:
/ @thefidgetfix
Thanks for watching! I know it sounds cheesy but liking and subscribing really does help!
Use my code thefidgetfix for a 10% discount off of most items at
GEEONE
geeone.com/en-ca
and
BIG WHITE EDC
bigwhiteedc.com/
Intro song “Ride of A Lifetime” by COMPUTRONIC featuring Mike Orvis
I produced 80s music in another life under the name COMPUTRONIC.
The albums can be found here on Spotify and most other music streaming services.
open.spotify.com/artist/5rBIv...
Or purchase the albums here.
computronic.bandcamp.com/ - Развлечения
I think your bearings also look a little dry. Rinse the bearings with a generous amount of lubricant and wipe them clean on a soft tissue. And just to be sure, clean the track part of the inside of both lids with a lightly oiled q-tip. And your good to go!
Thanks for the the tips! I did clean out the lids before the video actually. That white ring all around the inside of the lids seems to be where the black "paint" has worn off.
I think you might be missing the "axle" piece (in the middle). It might perform a bit differently with that part in place 👍🙂
Wow really? I’ll have a closer look at it. I wouldn’t even know where to get something like this if it actually is missing.
@thefidgetfix I think they just use another magnet. But it has to be thick enough to engage both halves. It's usually a "loose" piece (not glued in).
I've also seen coins like this just use a metal slug instead of a magnet. However, I have never owned an actual "Milk Cap" from ACEDC.
@@bruner thanks Dan! I’m going to look into it.
@@bruner Thanks for the tip Dan! I had a magnet that was the right size and it definitely makes a difference
I've bought a few haptic but they do nothing for me personally. There's just no satisfaction
Yeah it’s definitely a preference thing.