I tried this on the Aqueon quiet flow and most of my fish died. Hindering the flow stops the bubbles/agitation which stops oxygenating the water. If you do this, get an air stone so that there is still a constant flow of oxygen
Thanks I just used some hydroponic sponges for seed starting that I had on hand and it didn’t silent it just kinda made the sound less bothersome since the dispersion of the water is different but not obstructed
I had HOB filters years ago (all that was available at the time) and am not a fan of them or sponge filters. I have three tanks two of which are on canister filters and my 70-litre tank uses an internal. 😊👌
@@BarrysAquarium Shop around though. I wouldn't jump onto the Fluval wagon in a hurry for the fact that in Australia especially, they're overpriced; not especially good value for money or versatile.
This guy doesn’t know what he is talking about. Take apart your motor and clean it. There is stuff stuck in it, this way the humming will go away. Also if you want 100% quietness just put sound proof black foams on the sides and the back of the file tee on the outside.
@@josephezadpanah Didn't work for me.... Returned the first one. Second still hummed loudly. Maybe they were from a bad batch. Sechem 55's, in my experience, are much better.
Happened to me and my family when we first assembled it, literally sounded like it was gonna explode and it was crackling but then my mom said we should try putting more water and now it’s almost silent except for the water noise which is so relaxing. I love it
@@EezoTheChezo yup. i put water into my tank and planned on adding more the next day, when i turned on the filter it was very loud. put more water in the next day and my filter turned off and turned on pumping out water and it was a lot quieter.
I just fill my tank right up to the water line or where the water comes out the filter. I don't hear anything but the motor. I have a marineland penguin 350 and it tends to be a louder filter. Also helps to replace all the plastic bits and put in soft media like sponges in place. Much better ♡
What does it mean when the filter is humming loud, I tried taking apart the filter to see if it was clogged or if the propeller was acting a fool but I couldn't really find a problem.
Derek Arneecher I’m not sure, I had the same problem. I think those filters are just loud like that because I have taken mine apart and could never find a solution. I just ended up taking that filter down because of the noise
I had the same filter. I removed the filter media from the grimy piece. I replaced it with a longer piece and cut slips to fit. It's long enough to go into the water and has almost no sound at all and a good spot for more beneficial bacteria to grow. Took about 30 seconds and didn't use a drop of glue.
@@evilcrime5724 I fixed mine today. I cut a side off a big Crystal Geyser 1 gallon water jug & made sure it was long enough to reach the water & wide enough for the width of the filter opening. I had some clear flex tape & attached it to the edge of the filter where the water falls out. It worked & looks like a waterfall due to the bottle design. Maybe it will work for you guys too!
Top filters and hang on back filters are the noisiest especially when the tank is in the bedroom.. which will definitely disrupt sleep lol .. best are still internal filters which are way quieter.. 😆
I don't know if you still need a solution but I invented a solution tonite that is super cheap and takes no time to install. I'll make a video in the future about it to share to the Aquarium community.. it's quite amazing because it's so simple. I'm not going to put any spoilers here for now.
I assume you are talking about saltwater and the purple color is a type of algae that grows on it. I’m not sure how long it takes but I used dry rock in my tank and it’s been about 10 months and it’s still not purple.
@@BarrysAquarium yes i am talking about saltwater.Thank you for the reply! I've recently discovered your channel and I'm a big fan. I live in South Africa and I plan on getting my reef aquarium up and running by the end of this year when I have time .
Dude, you don't have a filter cartridge In there. Where it says FRONT your supposed to have a white pack of biological filter media encased in white plastic.
And also the water is just getting pumped up through the pump and isn't even touching the small amount of foam media you have at the bottom of the filter, so nothing is getting filtered.
Decreasing the water flow decreases the filtration in my opinion. Keeping the tank filled and extending the outflow into the water would also solve the problem while maintaining good flow and filtration for the tank.
"Are you tired of hearing this?" ; literally no noise.
;-; MINE LITERALLY SOUNDS LIKE A MOTORCYCLE
Mine too lmfao
Same
I will record it
Here ruclips.net/video/OrJ9OciaGkM/видео.html
my tank came with the "quiet" 10 and holy crap it vibrates! even tried the vaseline impeller and random foam to lift it off the tank
I tried this on the Aqueon quiet flow and most of my fish died. Hindering the flow stops the bubbles/agitation which stops oxygenating the water. If you do this, get an air stone so that there is still a constant flow of oxygen
Thanks I just used some hydroponic sponges for seed starting that I had on hand and it didn’t silent it just kinda made the sound less bothersome since the dispersion of the water is different but not obstructed
I had HOB filters years ago (all that was available at the time) and am not a fan of them or sponge filters. I have three tanks two of which are on canister filters and my 70-litre tank uses an internal. 😊👌
Might have to give canister filters a try
@@BarrysAquarium Shop around though. I wouldn't jump onto the Fluval wagon in a hurry for the fact that in Australia especially, they're overpriced; not especially good value for money or versatile.
@@BarrysAquarium I've had great success with the Sicce canisters.
@@BarrysAquarium😮
What if I have a paludarium?
Wow, why don’t you just put in a telescope, or some computer parts, A toy car and some string usually helps
Fish safe glue?
Yes, most super glue is fish safe as long as the main ingredient is cyanoacrylate
That’s gonna cause overflow
A small price to pay for a quiet filter.
I don't mind the water sound but i hate the humming.
This guy doesn’t know what he is talking about. Take apart your motor and clean it. There is stuff stuck in it, this way the humming will go away. Also if you want 100% quietness just put sound proof black foams on the sides and the back of the file tee on the outside.
Also if you want the water noise go away just increase water so that it doesn’t drop fast
@@josephezadpanah Didn't work for me....
Returned the first one. Second still hummed loudly. Maybe they were from a bad batch. Sechem 55's, in my experience, are much better.
@@josephezadpanah And next time you comment try not to be such a know-it-all condescending asshole.
@F.B.I. Hey thanks for the tip! I'll try that next cleaning.
"Are you tired of hearing this?" *just water noises*
Mine: *BRRRRRRRRRR*
Edit: I didn't put enough water in mine, god I feel stupid. 😂
Happened to me and my family when we first assembled it, literally sounded like it was gonna explode and it was crackling but then my mom said we should try putting more water and now it’s almost silent except for the water noise which is so relaxing. I love it
@@EezoTheChezo yup. i put water into my tank and planned on adding more the next day, when i turned on the filter it was very loud. put more water in the next day and my filter turned off and turned on pumping out water and it was a lot quieter.
It was the hummm of the pump! That I want to quiet not the magical water crackles 😭
I just fill my tank right up to the water line or where the water comes out the filter. I don't hear anything but the motor. I have a marineland penguin 350 and it tends to be a louder filter. Also helps to replace all the plastic bits and put in soft media like sponges in place. Much better ♡
same i filled it up to where i don’t
hear the water fall into it anymore. but idk if that’s bad?
yeah it dosent break the surface tention so no fresh air for the fish
Bruh I sleeping and mines was making a noise like if cops was outside 🤣I was so mad I just replaced that whole piece.
What does it mean when the filter is humming loud, I tried taking apart the filter to see if it was clogged or if the propeller was acting a fool but I couldn't really find a problem.
Derek Arneecher I’m not sure, I had the same problem. I think those filters are just loud like that because I have taken mine apart and could never find a solution. I just ended up taking that filter down because of the noise
@@BarrysAquarium I might have to put mine out of commission too. Good thing I'm still cycling this tank.
Derek Arneecher You could try a tank with no filter and just a circulation pump. That’s what I’m doing with mine after I took the filter out.
@@BarrysAquarium hmmm that is a solution, I might do some more tinkering before trying that
@@derekarneecher3949 I think its the impeller floating and hitting the plastic above it. I dont know a safe way to keep the impeller from floating.
Lmao this is ridiculous. Just buy a different style of pump.
I had the same filter. I removed the filter media from the grimy piece. I replaced it with a longer piece and cut slips to fit. It's long enough to go into the water and has almost no sound at all and a good spot for more beneficial bacteria to grow. Took about 30 seconds and didn't use a drop of glue.
"Quiet flow" likely means the actual flow is quiet as in you dont have water splash effects or at least not as loud ones
You just created a water bypass
Mine sounds like a bathtub is getting filled
Me too me my husband end up fighting, because he is complaining
@@evilcrime5724 I fixed mine today. I cut a side off a big Crystal Geyser 1 gallon water jug & made sure it was long enough to reach the water & wide enough for the width of the filter opening. I had some clear flex tape & attached it to the edge of the filter where the water falls out. It worked & looks like a waterfall due to the bottle design. Maybe it will work for you guys too!
Yeah it's a fish not a dog. The noise needs to be eliminated! In fish tank filters 101
Haha I find the Aqua clear filter loud because my water level is lowered since I have a turtle tank.
I guess that wouldn’t make it so quiet then 😂
How did it hold up over time ?
I would be worried about the chemicals from the superglue getting to your tank
Super glue is totally body safe, it was originally developed to seal wounds
No
my filter is making a weird squirting noise, PLEASE HELP!!!
I’m not really sure why it’s doing that, what type of filter?
@@BarrysAquarium TopFin PF10. It also has stopped working... every time i take it apart, it works for 5-10 minutes and shuts off again :(
my water lever is pretty high and i have a bubbler, is that the problem?
That’s not good :( Hope everything else in your tank goes smoothly
@@BarrysAquarium thank you! i will get a new filter i guess..
Thank you so much! You’re very creative and I’m going to see what I can try along with that interesting filter you showed at the end👏🏽👏🏽👏🏽🙏🏽😆
I have turtles so I that’s why mine is so loud. Cuz if I put the water any higher they’ll jump out. It’s happened before
thanks so much made a big difference nice and quiet now
Top filters and hang on back filters are the noisiest especially when the tank is in the bedroom.. which will definitely disrupt sleep lol .. best are still internal filters which are way quieter.. 😆
Ummmmmm 🙄 what? 🤨🤷♀️
I don't know if you still need a solution but I invented a solution tonite that is super cheap and takes no time to install. I'll make a video in the future about it to share to the Aquarium community.. it's quite amazing because it's so simple. I'm not going to put any spoilers here for now.
The chemical from the glue isn’t it gonna ruined the water taste towards the fish or no
oh geez, all that hassle? have you tried checking the impeller?
My aquaclear is usually quiet but the little water fall split and the right side drops in rapid water drops and it makes so much noise
Like your video and thank you for sharing 👍😁
I have a question not really relating to this video but if I buy dry rock how long does it take to turn purple in color
I assume you are talking about saltwater and the purple color is a type of algae that grows on it. I’m not sure how long it takes but I used dry rock in my tank and it’s been about 10 months and it’s still not purple.
@@BarrysAquarium yes i am talking about saltwater.Thank you for the reply! I've recently discovered your channel and I'm a big fan. I live in South Africa and I plan on getting my reef aquarium up and running by the end of this year when I have time .
That’s great to hear!! My reef tank is definitely one of my favorite tanks and good luck with your reef tank! 👍
Bro the filter ain’t even working right. Sorry but it’s flowing over the over flow
Nice… I have some old stuff at home and I thought to dump them. You can collect them free and try it on your aquarium… brilliant ideas!
Sent this to my friend bcuz his mic picks up the turtle tank 😁
Dude, you don't have a filter cartridge In there. Where it says FRONT your supposed to have a white pack of biological filter media encased in white plastic.
And also the water is just getting pumped up through the pump and isn't even touching the small amount of foam media you have at the bottom of the filter, so nothing is getting filtered.
Lol, I noticed that too,,,, I have same filter mine is ok not loud just a very gentle hum, hardly notice it. I guess some are loud some are not.
You inspired a fix to my same problem. Thank you!
Glad to hear!
Answer fast what is the link to the moldable plastic?
FreshAquatics It’s not really moldable plastic, it’s actually just a cut out from a plastic binder
Decreasing the water flow decreases the filtration in my opinion. Keeping the tank filled and extending the outflow into the water would also solve the problem while maintaining good flow and filtration for the tank.
Thanks for the advice!