Cool idea but you should definetly swap the inlet and outlet 1. Prevent backflow of dirty water/muck gathered at the bottom of the filter. 2. Allows easy access to mechanical filters for cleaning and replacing 3. The water catchment area at the bottom along with bio media will allow for full nitrogen cycle to take place.
he is right if we put water from top then only mechanical filtration if from bottom to top bio filterstion also like canister filter. For bio filteration need water holding so anyway we can hold water minimum 1 inch above the bio media .
@@rashidmehmood4844 you can make the inlet from top, and outlet from bottom but the outlete pipe need to go up a bit till the biological filter drowned
Very nice design, and this kinda filter works exceptionally better then any traditional filters, but if you attach a valve in the lead of the container it will fix the overflow. Because there will be overflow.
It is a small container, it just like a Hang on filter that can be easily clean. not like Sumps and Big Canister Filters. Thanks for the opinion and Happy fish keeping 😊👍
Exactly...! He'll figure it out when he has to completely take it apart just to clean the pre filter media.... he could have so easily went top down. (none of the media is as good as 30PPI sponge)
What pump are you using sir? The pump I use sir is a nano submersible pump. It is a small pump for a small container. Thank you for following the video sir and Happy Fish keeping 😊🐠😀
www.amazon.com/Rebower-Plastic-Tubing-Lighting-Aquarium/dp/B0BXJ5ZRZD/ref=mp_s_a_1_6_sspa?crid=269D3YP9KYAC7&keywords=20mm+clear+pipe&qid=1696560076&sprefix=20mm+clear+pipe%2Caps%2C359&sr=8-6-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfbXRm&psc=1 This is the link. Thank you and happy fish keeping. 😊🐠
Every time the tape is started tangled I get aggravated lol so ocd and being a plumber doesn’t help either just became a habit making sure it is always flat and even 😂
Boss anong wattage ng water pump ang maganda na malakas din makahigop at the same time ng bigger poops (turtle)? Kasi gagawin ko yung same ng sa inyo na diy canister filter din po..salamat for answering
Pwede din naman sa taas boss. Ginawa ko kasi jan kaya galing sa baba pataas para masala ng mga Filter media's ang mga, dumi bago pumasok sa taas pabalik ng Tank ang tubig. And nakababad sa tubig ang Filter Medias. 😊😁🐠
Good day to you. The size of the container is 1.5L. I bought it on out local supermarket. At the food storage section. Or you can buy it online. Thank you and happy fish keeping 😊😁🐠
Ciao, in primis complimenti per il fai da te, ma a mio modesto parere è un filtro con una tecnica errata. L'acqua dovrebbe incontrare per primo i materiali a filtrazionne meccanica (tutti e non separati), poi eventuale filtrazione chimica (opzionale) ed infine la filtrazione biologica. Nel tuo progetto hai creato e messo lì a caso, mischiando, meccanica e biologica, a strati, come se fosse un sandwich. Poi, coosa fondamentale, essendoo la vasca del tuo filtro trasparente, non è assolutamente consona ad ospitare materiale filtrante biologico essendo i batteri fotosensibili, quindi lasciando per un attimo perdere le bioballs e quei sassolini, che sono materiali non porosi e poco adatti ad ospitare batteri eterotrofi, ma la luce ucciderebbe quest'ultimi. Scusa poi se sono così prolisso, ma come fai a fare manutenzione senza muovere il materiale biologico filtrante? Perchè lo sai che quello non va smosso. Quindi si, ottimo fai da te sicuramente, ma filtro davvero poco funzionale.
I can see one big drawback of this design. As soon as the pump stops working all the dirt collected at the bottom off filter is going to get sucked back in the tank
Good day to you sir. Which filter pad do you mean? The filter wools and the bio foams?. 1st I place the bio foam on to the bottom of the container on the water inlet. then next is the washable foam, then small pebbles and filter wools then another washable foam and then the filter medias.
you have done inmaculate work but the pump can not be inside the tank cause you will have that pump obstructed by the dirty material, pump should be inside the filter pumping the water free of dirty there is no sense to put the pump inside the dirty tank
Catastrophically not durable design. Hot-melt adhesive with water does not work and will fall off unexpectedly, at the most inopportune moment. If the padding polyester and sponges are not too clogged, the pump will no longer be able to lift water into the filter. All dirt will accumulate at the lower level and when you try to remove the filter, it will flow into the aquarium. It is necessary to swap the water inlet and outlet. And this will also add to the height of the water rise. As an idea for making a filter, it’s not bad.
Cool idea but you should definetly swap the inlet and outlet
1. Prevent backflow of dirty water/muck gathered at the bottom of the filter.
2. Allows easy access to mechanical filters for cleaning and replacing
3. The water catchment area at the bottom along with bio media will allow for full nitrogen cycle to take place.
So put water coming in at top,and water going out at bottom
big mistake by him. what was he thinking?
bog filter fill from bottom up
he is right if we put water from top then only mechanical filtration if from bottom to top bio filterstion also like canister filter.
For bio filteration need water holding so anyway we can hold water minimum 1 inch above the bio media .
@@rashidmehmood4844 you can make the inlet from top, and outlet from bottom but the outlete pipe need to go up a bit till the biological filter drowned
Ha água tem que entra por cima pra fazer a filtragem a ordem esta totalmente errado
Thank you for the great opinion boss. 😊
I will probably make like this but I will swap the inlet ang outlet. Thanks for the idea👌
The inlet of the filter is in the wrong direction, if the power of the pump suddenly interrupts, the accumulated dirt will flow back,
agree
Just fix it,he gave you an idea,fix it
Mantab bangg❤, sempet kaget pas di coba, gw kira meledak😂😂😂😂
Very nice design, and this kinda filter works exceptionally better then any traditional filters, but if you attach a valve in the lead of the container it will fix the overflow. Because there will be overflow.
Tem como transbordar aí não 😂
Increíblemente bello y funcional 100%
Very cool I love watching your videos it always gives me ideas .
Pipa masuk airnya lebih baik dari atas, kalau dari bawah airnya kalau mati listrik ke bawah lagi, yang ada media biologis nya kering
What type of materials you use, is it regular pvc??
It is pvc board panel. Sintra board. You can order it online. Thank you and happy fish keeping 🐠😊
And the tubing?
Awesome idea but i think if the sponge filters get clogged the water will not get through..
where I will get it in Pune Maharashtra india
Good day to you boss. What materials you need?
that will be hard to clean, you have to remove all the medias so you can clean the sponge and wool
It is a small container, it just like a Hang on filter that can be easily clean. not like Sumps and Big Canister Filters. Thanks for the opinion and Happy fish keeping 😊👍
Exactly...! He'll figure it out when he has to completely take it apart just to clean the pre filter media.... he could have so easily went top down.
(none of the media is as good as 30PPI sponge)
@@2869may u have to take a aquaclear filter apart the same way
@@jnightmare2386 And I wouldn't own one...
אלוף ד''ש מישראל נהנתי שבאמת הכל בייתי
I followed your video but water flowing top of cover . Problem is pump speed is more so how to reduce the speed of pump.
Water filling fast
What pump are you using sir? The pump I use sir is a nano submersible pump. It is a small pump for a small container. Thank you for following the video sir and Happy Fish keeping 😊🐠😀
Where is purchase in transparent pipes and fittings.
Here's the link bro 😊👍
s.lazada.com.ph/s.k7A9y
Bravo, This aquarium filter suitable for how many liters fish tank? (greeting from bangkok,Thailand)
That kind of filter suitable for 10 gal to 20 gal tank. 😁
What size is the container?? Please and thank you... 👍
Hi, It is 1.5L container. Thank you and happy fish keeping 😊🐠
Which pvc pipe use in this video?? Can you give me amazon buying link please
www.amazon.com/Rebower-Plastic-Tubing-Lighting-Aquarium/dp/B0BXJ5ZRZD/ref=mp_s_a_1_6_sspa?crid=269D3YP9KYAC7&keywords=20mm+clear+pipe&qid=1696560076&sprefix=20mm+clear+pipe%2Caps%2C359&sr=8-6-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfbXRm&psc=1
This is the link. Thank you and happy fish keeping. 😊🐠
What are those pump called
It is a 3 wats Submersible pump. 😀
Every time the tape is started tangled I get aggravated lol so ocd and being a plumber doesn’t help either just became a habit making sure it is always flat and even 😂
I think its much better if the flow was from top to bottom, that way it will be more filtered
alot of filters are bottom up
Boss anong wattage ng water pump ang maganda na malakas din makahigop at the same time ng bigger poops (turtle)? Kasi gagawin ko yung same ng sa inyo na diy canister filter din po..salamat for answering
Gaano kalaki ung Tank turtle boss? Salamat po
Where can I find that container?
I buy the container at our locar supermarket. On the food container section or you can buy it online 😊 thank you and happy fish keeping 😊
Pwersado ang pump sa ganyang setup lalo kung magbabara ang bottom portion
Pano po kung sa taas pina daan yung tubig di po ba matatangal yung takip at dikit nang pipe??
Pwede din naman sa taas boss. Ginawa ko kasi jan kaya galing sa baba pataas para masala ng mga Filter media's ang mga, dumi bago pumasok sa taas pabalik ng Tank ang tubig. And nakababad sa tubig ang Filter Medias. 😊😁🐠
What size was your container box ?
Good day to you. The size of the container is 1.5L. I bought it on out local supermarket. At the food storage section. Or you can buy it online. Thank you and happy fish keeping 😊😁🐠
don´t mad but, you are forcing the pump if you put the water intake up, the pump will work better
Thank you for the great advise sir. That's Very well noted! Happy Fish keeping 😊👍
Nice
Amazing design you put out so many good videos
Thank you very much! 😊💕
how many watts is your submersible pump?
3 watts only. It's a nano submersible pump. 😁
cool
The water inlet should have been the other way around to make it easier to clean
👏👌
Ciao, in primis complimenti per il fai da te, ma a mio modesto parere è un filtro con una tecnica errata. L'acqua dovrebbe incontrare per primo i materiali a filtrazionne meccanica (tutti e non separati), poi eventuale filtrazione chimica (opzionale) ed infine la filtrazione biologica. Nel tuo progetto hai creato e messo lì a caso, mischiando, meccanica e biologica, a strati, come se fosse un sandwich. Poi, coosa fondamentale, essendoo la vasca del tuo filtro trasparente, non è assolutamente consona ad ospitare materiale filtrante biologico essendo i batteri fotosensibili, quindi lasciando per un attimo perdere le bioballs e quei sassolini, che sono materiali non porosi e poco adatti ad ospitare batteri eterotrofi, ma la luce ucciderebbe quest'ultimi. Scusa poi se sono così prolisso, ma come fai a fare manutenzione senza muovere il materiale biologico filtrante? Perchè lo sai che quello non va smosso. Quindi si, ottimo fai da te sicuramente, ma filtro davvero poco funzionale.
Thank you for the great opinion 😊 happy fish keeping to you sir 🐠😊😁
Can you do it for me please?
Harika el becerisi
i WANT TO PURCHASE THIS FILTER, ARE YOU SOLD THIS TYPE OF FILTER?
Sorry its not, for sale. Its just a tips and ideas for aquarium filters. 😊
Bhai iska moter kaha milega
Its a 3 watts Submersible pump. U can by that online or at your local petstore 😊
👍👋👋👋
If I extend the length of the outlet pipe, then can I keep it behind the aquarium instead of top? or is it designed to work only on top??
Yes sir you can also put it behind the aquarium as long as it levels on the top of the aquarium. Thank you and happy fish keeping 🐠😊😁
Ada link penjualan nya ga mase
Sorry boss it's not for sale. It just and DIY aquarium filter. For concept and tips. 👍😁
What sizes of pvc did you use sir?
20mm pvc clear pipe Sir. I bought it online 1meter by 2cm Diameter. Thank you sir and Happy Fish keeping 😁😊
Paglipatin mo black hose sa taas yan dapat bat ganyan na isip mo mali yan 😂
good luck with cleaning
Bio balls aren't good for sinking in the water.
Thanks for the advise 😊
👏
I can see one big drawback of this design. As soon as the pump stops working all the dirt collected at the bottom off filter is going to get sucked back in the tank
Thank you for the great opinion boss 😊👍
Bang ada shop nya gak nih mau beli kalok ada wkwkwk
😂
Boss ano tawag sa host
Ung black boss flexible hose. Ung isa 20mm clear pipes. 👍
Lost me with the filter pad placement
Good day to you sir. Which filter pad do you mean? The filter wools and the bio foams?. 1st I place the bio foam on to the bottom of the container on the water inlet. then next is the washable foam, then small pebbles and filter wools then another washable foam and then the filter medias.
you have done inmaculate work but the pump can not be inside the tank cause you will have that pump obstructed by the dirty material, pump should be inside the filter pumping the water free of dirty there is no sense to put the pump inside the dirty tank
Thank you for the Great Advise sir.
The layers are all jumbled up. 😅😅😅
😂😊
Catastrophically not durable design. Hot-melt adhesive with water does not work and will fall off unexpectedly, at the most inopportune moment. If the padding polyester and sponges are not too clogged, the pump will no longer be able to lift water into the filter. All dirt will accumulate at the lower level and when you try to remove the filter, it will flow into the aquarium. It is necessary to swap the water inlet and outlet. And this will also add to the height of the water rise. As an idea for making a filter, it’s not bad.
Kafa motoru kapanınca bütün pisliği geri akvaryuma geri verecektir üzgünüm ama beyhude bir çaba olmuş
Why?
Tylko dla krewetki 😢
the filter media is totally in the wrong order and makes this filter useless
Thank you for the opinion. Happy fish keeping to you! 😊
How it should be I am making one like this
Also the pipe connection..the out let here should be attached to motor whereas the inlet here should be outlet@@sanjaypatil3097
Hose*
You have no carbon.
oh yes sir good point!. Planning to add Carbon also. Thank you very much for the great advise! happy fish keeping 😊
反過來不是更好
我認為無論哪種方式都很好。這只是一個演示，你可以探索更多並創造出比我更好的東西。謝謝你，祝你養魚愉快。 😊
Baliktad gawa mo! Hose na itim dapat sa taas yan dumadaloy tubig baliktarin mo nalang pag lagay 😂
You mean po ang.pump ilagay din sa loob ng canister?