Wow, what a very nice and interesting review and video. Also the tracklayout with the smooth curves is beautiful. Your cars drive so realistic through the curves. And the tools you made is also craftsmanship and thank you for showing them in the video. I like to see a video how they work. If the steel tape was easier to work with, I would start direct building a new track. Thank you David
afx? I had a set too...cars always flying off the track.....tabs breaking off that held the track together etc.....the big difference I see now is the tape is set width wise on the surface making a larger contact patch. AFX the supply was vertical making magnets useless and the contact very narrow.....
It's an AutoWorld t-jet reproduction chassis. What I was wondering about is how the bends were made with the steel tape without it kinking, and how it was adhered to the surface? It's a nice job, I prefer it's appearance over copper tape!
+Mark Goodlin Actually, it is just steel tape. It is magnetic by nature (since it is steel, as opposed to copper). The magnetic part is in the cars only.
Have you considered routing a channel either side of the slot and maybe running stranded steel wire? I imagine you could untwist it and fill the channel. It would need to be tied down or otherwise bound/sealed (wire glue?) It's sounding like a lot of work now that I say it aloud :)
Great track. Now what wood did you make it out of and what did you use for a track surface? Also did you have to modify your pickup shoes on your ho cars to make them work?
You do realize that HO slot cars and their parts are for sale all over the place, right? There are companies that make them right now and there are NOS and used HO slot cars available online. Cheap. Many different types and manufacturers. But, to answer your question, yes, it's possible to fabricate an HO slot car from scratch but it is by no means necessary and, IMHO, a waste of time.
Wow, what a very nice and interesting review and video.
Also the tracklayout with the smooth curves is beautiful. Your cars drive so realistic through the curves.
And the tools you made is also craftsmanship and thank you for showing them in the video.
I like to see a video how they work.
If the steel tape was easier to work with, I would start direct building a new track.
Thank you David
Nice work ! Unique. Looks like a blast. Definitely a keeper. No more "cut" worn out pick up shoes .
I loved so much all of what you are teaching us. AWESOME !!!!
neat track, i only have h.o. scale too. it's what we had back in the 60 & 70s, always loved em
afx? I had a set too...cars always flying off the track.....tabs breaking off that held the track together etc.....the big difference I see now is the tape is set width wise on the surface making a larger contact patch. AFX the supply was vertical making magnets useless and the contact very narrow.....
Very nice track and solution!
Could you post a product link? I can't find this thin steel tape. :(
A T-Jet type car with track magnets?! Never knew there was such a thing
It's an AutoWorld t-jet reproduction chassis. What I was wondering about is how the bends were made with the steel tape without it kinking, and how it was adhered to the surface? It's a nice job, I prefer it's appearance over copper tape!
How did you make the slots? What materiel is the table?
I want to know how you powered the thing up. Nice work!
Do you ever plan to make wider tracks for those much bigger slot cars?
+generallee04 No. I only have HO scale cars.
Ah ok thx
That's neat. What exactly is a magnetic steel tape? I'm always making stuff but I never seen this before.
+Mark Goodlin Actually, it is just steel tape. It is magnetic by nature (since it is steel, as opposed to copper). The magnetic part is in the cars only.
is it stainless? Alot of stainless is not magnetic.
stainless isn't magnetic by nature unless it has been worked....
Have you considered routing a channel either side of the slot and maybe running stranded steel wire? I imagine you could untwist it and fill the channel. It would need to be tied down or otherwise bound/sealed (wire glue?) It's sounding like a lot of work now that I say it aloud :)
Never mind, after more reading I see magnetic braid is already a thing 👍
Great track. Now what wood did you make it out of and what did you use for a track surface? Also did you have to modify your pickup shoes on your ho cars to make them work?
are all of you guys make this cars by yourself? is it possible?
You do realize that HO slot cars and their parts are for sale all over the place, right? There are companies that make them right now and there are NOS and used HO slot cars available online. Cheap. Many different types and manufacturers.
But, to answer your question, yes, it's possible to fabricate an HO slot car from scratch but it is by no means necessary and, IMHO, a waste of time.
nice , thank you
excellent .-)
When you go to sit down we can't hear you.....
0 views 21 likes. youtube is drunk
Think I saw that at the trash dump. JK