Nice!!! Another awesome review I really do like the jeep better than the bronco even though all they did was change the bodies and its still the same chassis. SWEEEEEEET REVIEW MY FRIEND 💯🔥🔥🔥🔥🔥🔥🔥
Better late than never, that's how I roll, congrats on the new CJ-7, first thing I thought was how long before they make this for the scx6, you just know it going to happen. Thumbs up and looking forward to what you do with this rig.👍💯👍💯👍💯👍
Buongiorno. Scrivo per chiedere un consiglio sulla batteria per la Axial SCX10 III Jeep CJ-7. Sul sito c’è scritto “Needed to Complete: 2-3S LiPo Battery with EC3 or IC3 connector”. Sul sito ci sono 2 batterie consigliate. Su "2S Completion Guide" c'è la "Spektrum Smart G2 Hardcase LiPo Battery IC3 5000mAh 7.4V 2S 50C". Su "3S Completion Guide" c'è la "Spektrum Smart G2 Hardcase LiPo Battery IC3 5000mAh 11.1V 3S 30C". - Praticamente nell’utilizzo cosa cambia tra "7.4V" e "11.1V"? - Praticamente nell’utilizzo cosa cambia tra "2S" e "3S"? - Praticamente nell’utilizzo cosa cambia tra "30C" e "50C" e "100C"? - Come si fa a capire quale batteria è più indicata? - Quale batteria consigliate per la Axial SCX10 III Jeep CJ-7? Grazie. Luca
I don’t know why Horizon/Axial, lacks so much imagination, that they had to release another Jeep. If somebody releases one more F”@&ing Jeep I’m gonna scream. Second, for that price tag it needs to have portals. Third, I don’t know why you and the rest of the crawler community like to lower your vehicles. Yes they perform better, but they look like shit, and if we are going after scale, every rock crawler you ever see in real life if lifted, with bigger tires. To me lowering the truck is like cheating if we are going after “scale”.
I appreciate you watching! The CJ7 offers a lot of brand new stuff in the visual department along with a lot more detail than previous models. Lowering is indeed preference, if you like your trucks tall, run it as is. Personally I like tires tucked, a bit smaller and therefore I don’t need the height. Have a great weekend!
Congrats, I love mine. You may have noticed the left side of the body does not sit all the way down and leaves a gap at the bottom of the drivers front fender where it meets the slider. The cause is the plastic loop that the strap goes through on the left side of the left side battery holder hits the bottom of the drivers door sill. If you cut this strap holder off or trim it down about 2.5 mm or so then the body will sit all the way down as it should and you will no longer have that gap at the bottom of the fender.
@@hemistormrc Easy fix, at first I thought it was my battery strap so I put on one without a buckle. That didn't work so I thought my battery was too high but even with the battery out it was still hanging up. So I looked at it from the bottom with a flashlight with the body on and then I could see where it was hitting.
How are you feeling these days bro? I know some time ago when you quit smoking, and you went through some very tough times. I smoked for fourty six years and finally quit three and a half years ago. Thank god we are still around!! You look much better. I hope we see more of your channel this year!! God bless you my friend, and thanks for sharing!!!
I can't remember, but do you have any videos that show your knife collection 👀
Not yet, but I should do one for sure!
Did they drive it to you to Norway from California?
In low gear. 🤣
Congrats on 100K subscribers!❤
Thank you so much 😀
Nice!!! Another awesome review I really do like the jeep better than the bronco even though all they did was change the bodies and its still the same chassis.
SWEEEEEEET REVIEW MY FRIEND 💯🔥🔥🔥🔥🔥🔥🔥
Thanks man, I hope you’re well. 💪🏼
@@hemistormrc thank you 👍👊🔥🔥💯
Looking forward to seeing what you got planned for this. Really want to know what's in that little box🤔
You will find out soon enough!
Thank you for the video man! I am excited to see your finished project!
You and me both! Thanks for watching!
I'm thinkin' that little box has a driver figure...
Almost, but not quite!
So it looks like all I need to do is get a cj7 body and put it on my bronco?
Get some bumpers and sliders while you’re at it. 👍🏼
So it’s a jeep body on the early bronco chassis
Different wheels, tires, bumpers, sliders. I like it a lot, doesn’t scream recycled to me!
Better late than never, that's how I roll, congrats on the new CJ-7, first thing I thought was how long before they make this for the scx6, you just know it going to happen. Thumbs up and looking forward to what you do with this rig.👍💯👍💯👍💯👍
Thanks! Fingers crossed for that SCX6!
Some one needs to make a hard and soft tops for this.
Indeed! And soft door tops.
Throw the vfd in it get the weight down
Seen quite a few of those already, great option!
Thank you for sharing my man. Always enjoy hearing your opinions
My pleasure! Thank you for the support!
Had to one of these in the stable. Looking forward to see what you have planned. 2024 gonna be great for rc 👍
Yes indeed, can’t wait to see what all the companies have planned for this year!
I’m waiting till you get the clear body for the CJ and put your spin on it. 😊
Will definitely get one ordered. More than enough planned before I do, though!
looking forward to see what you do to this one!
Hope you like it!
2 speed included.
Yes it is, as mentioned in the video all gears are installed. You need to unlock it and install a micro servo and you’re all set. 😃👍🏼
Call it CJ6😂😂
Haha, yes!
Find a driver.
Might print one. 😁
Buongiorno.
Scrivo per chiedere un consiglio sulla batteria per la Axial SCX10 III Jeep CJ-7.
Sul sito c’è scritto “Needed to Complete: 2-3S LiPo Battery with EC3 or IC3 connector”.
Sul sito ci sono 2 batterie consigliate.
Su "2S Completion Guide" c'è la "Spektrum Smart G2 Hardcase LiPo Battery IC3 5000mAh 7.4V 2S 50C".
Su "3S Completion Guide" c'è la "Spektrum Smart G2 Hardcase LiPo Battery IC3 5000mAh 11.1V 3S 30C".
- Praticamente nell’utilizzo cosa cambia tra "7.4V" e "11.1V"?
- Praticamente nell’utilizzo cosa cambia tra "2S" e "3S"?
- Praticamente nell’utilizzo cosa cambia tra "30C" e "50C" e "100C"?
- Come si fa a capire quale batteria è più indicata?
- Quale batteria consigliate per la Axial SCX10 III Jeep CJ-7?
Grazie.
Luca
The Firma40 is a nice Reciever/ESC unit. You can program it with the Hobbywing 1080 program box.
Good to know, thanks!
I don’t know why Horizon/Axial, lacks so much imagination, that they had to release another Jeep. If somebody releases one more F”@&ing Jeep I’m gonna scream. Second, for that price tag it needs to have portals. Third, I don’t know why you and the rest of the crawler community like to lower your vehicles. Yes they perform better, but they look like shit, and if we are going after scale, every rock crawler you ever see in real life if lifted, with bigger tires. To me lowering the truck is like cheating if we are going after “scale”.
I appreciate you watching! The CJ7 offers a lot of brand new stuff in the visual department along with a lot more detail than previous models. Lowering is indeed preference, if you like your trucks tall, run it as is. Personally I like tires tucked, a bit smaller and therefore I don’t need the height. Have a great weekend!
@@hemistormrc I still can’t stand to see ANOTHER Jeep
It scares me a little bit when you drive a truck with stickers, that's a little bit like blasphemy 😂😂 can't wait to see the Jeep finished 💪
Haha! I hope I’ll get my hands on a clear body soon too!
I'm going to guess lights? Wild guess happy 2024.
Happy 2024!
🧨🤘🤸♂️😃🎥💯
Thanks!
Very nice! May have to pick one up soon! Thanks for sharing! 🙌🏼👍🏼
Thanks for watching! I think you’ll like this one. 👍🏼👍🏼
Awesome hemi storm haven’t seen any of your videos in a while. Can’t wait to see what you do with this beautiful rig
More to come! I hope you are well!
Nice to see a CJ! I had a 1981 CJ5 and drove it for 30 years. I'm really looking forward as to what your modifications will be!
Hell yeah Hemistorm has a cool unique style
Right on! I’d love to see them being more common in Europe.
I enjoy seeing you put your personal touch on your RCs. Can't wait to see the transformation of this CJ!
You and me both! So eager to get this one finished completely!
Awesome as always
Thanks so much!
Can’t wait for the next video
Next week! 💪🏼🎉
Congrats, I love mine. You may have noticed the left side of the body does not sit all the way down and leaves a gap at the bottom of the drivers front fender where it meets the slider. The cause is the plastic loop that the strap goes through on the left side of the left side battery holder hits the bottom of the drivers door sill. If you cut this strap holder off or trim it down about 2.5 mm or so then the body will sit all the way down as it should and you will no longer have that gap at the bottom of the fender.
Great tip, thanks!
@@hemistormrc Easy fix, at first I thought it was my battery strap so I put on one without a buckle. That didn't work so I thought my battery was too high but even with the battery out it was still hanging up. So I looked at it from the bottom with a flashlight with the body on and then I could see where it was hitting.
Can’t wait to see what you do with this
Can’t wait to show!
How are you feeling these days bro? I know some time ago when you quit smoking, and you went through some very tough times. I smoked for fourty six years and finally quit three and a half years ago. Thank god we are still around!! You look much better. I hope we see more of your channel this year!! God bless you my friend, and thanks for sharing!!!
Oh nice to see you again.
It’s been a minute
Good to see you too! Happy 2024!