agree 👍, in fact hemistorm is so humble over all his achivement his works is arts, compared to the Vanquish hat guy "mr knight know it all" that always tell how bad is others brands and always compared it to the vanquish 🗿
Hey man, I stumbled on your channel a few months ago. Your paint videos have really helped me tremendously. I'm not an artist at all. I just paint VERY basic schemes. I had an idea of a "galaxy" paint scheme. However, I have no idea where or how to start. And, I don't have extra body shells to practice on. Like you, i use mostly tamiya PS paint. If you can offer any tips or suggestions, that would be awesome. Thanks again.
This is awesome! It turned out so nice. You explained everything very well, and you could show it off a bit more. It would be cool to see this done on a Vanquish Fordyce or Phoenix. Thank you for sharing
Really like your creativity on this project. Your use of wood is an excellent idea and a real treat to see some complimentary colors for the interior (sand) to avoid the black void that it was. Amazing work Chris!!! Thank you!!
Are you going to paint the rear fenders so they match the wood panels? Can't wait to see what light bar you're getting. I really like your videos, very informative. Thanks for the tape tip.
Awesome job as always, you are one of the people in the industry pushing the bar higher continuously. For next, maybe an Enduro since I know quite a few with the trucks... or even any of the Vanquish rigs.
Amazing work man love watching this build come together. Ive been lookin gat getting this rc and seeing your videos on it have helped me make my mind up. Keep up the amazing videos
I’m glad I just happened across your vids,so far liked and subscribed. I just picked up the CJ myself,a couple weeks ago. So these tips and ideas 💡 are spot on and perfect timing 🤙. Thanks,keep it going 🤗!!
Looks great! There anyway you can add the link the vanquishe products led light bar? I checked their website and only see a 6” which is unavailable. Thanks!
Holy F**K that looks good Chris! I just started a Element RC Enduro builders kit. Would love to see a video of the differences between the 1 and 2 kit versions and your thoughts and suggestions. I think I have wasted my money...maybe???
I don’t have the Elements kits, I only ever built their Gatekeeper, but: I’ve never had a bad truck from them! Great stuff, easy to work on, reliable to run. Have fun!
super plywood ............................and why not ! hate the flat interiors ,they make expensive models very toy-like . yours is a huge improvement . ( I have just spent 3 weeks detailing and painting a Wild Willy body and feel it was well worth the time and effort .)
Beautiful work as always! What are the lights that you showed at the end, I can’t find them. They look just like the real Baja designs lights, I love how they look!
@@hemistormrc that's some nice wood in the trunk. Is the laser the combined 3in1 machine? would be awesome to have such a wood insert for one of the "old style" bodied Elements (Trailwalker, SenderoHD, Ecto or Zuul).
By far the best RC builder/ creator on the planet!
That’s far too kind!
@@hemistormrc Nope, just telling the truth.
agree 👍, in fact hemistorm is so humble over all his achivement his works is arts, compared to the Vanquish hat guy "mr knight know it all" that always tell how bad is others brands and always compared it to the vanquish 🗿
Love to see you work your magic on a Traxxas TRX-6!
Looks amazing! Loving the painted seats and console.
Thanks! Might have painted them darker in hindsight. But, can always give it another coat!
I love the way you hold a hammer.
Maybe some day you’ll hold one too. 😁
I have been watching his Channel for years and have no idea why his channel is not huge . One of the best
Hey man, I stumbled on your channel a few months ago. Your paint videos have really helped me tremendously.
I'm not an artist at all. I just paint VERY basic schemes. I had an idea of a "galaxy" paint scheme. However, I have no idea where or how to start. And, I don't have extra body shells to practice on. Like you, i use mostly tamiya PS paint. If you can offer any tips or suggestions, that would be awesome. Thanks again.
This is awesome! It turned out so nice. You explained everything very well, and you could show it off a bit more. It would be cool to see this done on a Vanquish Fordyce or Phoenix. Thank you for sharing
I appreciate the kind words! Will see what can be done for the Vanquish trucks, they’re fun to work with too.
You do incredible top-notch work. I wish I had your skills. The best I've seen on RUclips University.
Agree hemistorm always fun to watch very cool rc content 💯
From day 1 i knew you would improve upon this interior.
Enough possibilities, easy truck to work on!
@@hemistormrc you have the skills. Look forward to see how you improve the jeep to make it what it should. Not a cost cutting cake decoration.
Awesome brother! Looks great
Thank you! I hope you’re well, Steve!
Really like your creativity on this project. Your use of wood is an excellent idea and a real treat to see some complimentary colors for the interior (sand) to avoid the black void that it was. Amazing work Chris!!! Thank you!!
Fantastic upgrades to the CJ7. The interior looks so much better with some interior color.
absolutely epic Chris! looks awesome with the laser details on the bed.
Are you going to paint the rear fenders so they match the wood panels? Can't wait to see what light bar you're getting.
I really like your videos, very informative. Thanks for the tape tip.
Yeah right on one of the best painters I’ve seen and builder
Nice job as always! The wood gives it a more finished look 👀!…
Awesome job as always, you are one of the people in the industry pushing the bar higher continuously.
For next, maybe an Enduro since I know quite a few with the trucks... or even any of the Vanquish rigs.
That is awesome, looks great
Thank you!
I just bought the same color Axial jeep cj7, love your videos, please keep up the great job
Guess I will have to get one of these SCX10iii CJ7 rigs! Really starting to like where this project is going! Great work Chris!
I always love seeing your builds and paint jobs
Amazing work man love watching this build come together. Ive been lookin gat getting this rc and seeing your videos on it have helped me make my mind up. Keep up the amazing videos
Incredibly clean work as always :)
Glad you like it!
Love it! Especially what you did dropping the floor of the bed area. Hope we get to see more of her later. 👍🏼👊🏼✌🏼
Damn...that looks fantastic.I think the new lights give the jeep an absolutely killer look for sure 💪👌
I’m glad I just happened across your vids,so far liked and subscribed. I just picked up the CJ myself,a couple weeks ago. So these tips and ideas 💡 are spot on and perfect timing 🤙. Thanks,keep it going 🤗!!
B
E
A
U
T
I
F
U
L
!
Awesome work, everything fits like a glove and makes sense! School is in session, takes notes folks!
Certainly transforms the interior looks way better buddy! 😁👌
Not gunna lie wish I could get my hands on that bed kit for my cj7. I’m getting ready to do the vfd drop in with the fusion pro
That is really killer looking
You RChippy far out man 🪚 hammertime 🔨💪
😄💪🏼
Looks great! There anyway you can add the link the vanquishe products led light bar? I checked their website and only see a 6” which is unavailable. Thanks!
Wow that is sweet dude 👍👍 Love the wood bed
Your making me change my mind about the cj. I might have to get one 😂😂 looking really great!!
You should! Fantastic truck!
Awesome video always such cool upgrades you got a wicked way of making them all so much cooler. Take care keep up the great work Chris
Absolutely incredible amazing skills would love to see a wooden floor in my cross rc jt4
Absolutely spectacular detail and craftsmanship!
How about mixing it up a bit and do a CEN F-450 build..
Amazing work!
Heck yeah that looks sweet dude, outstanding job as always 👍👍😎
Holy F**K that looks good Chris! I just started a Element RC Enduro builders kit. Would love to see a video of the differences between the 1 and 2 kit versions and your thoughts and suggestions. I think I have wasted my money...maybe???
I don’t have the Elements kits, I only ever built their Gatekeeper, but: I’ve never had a bad truck from them! Great stuff, easy to work on, reliable to run. Have fun!
hi, very good video, like all time 😍is it possible to get the G-code for the laser cuts, that will save me a lot off time, thanks in advance.
Hi! Hit me up on Instagram, I’ve been making some to order.
Absolutely incredible! Will you ever share the files for those of us who are design illiterate?
That’s really nice.
you might need light control for the lightbar
great work
Thanks! Glad you like it!
What paint number best matches your jeeps body?
super plywood ............................and why not ! hate the flat interiors ,they make expensive models very toy-like . yours is a huge improvement . ( I have just spent 3 weeks detailing and painting a Wild Willy body and feel it was well worth the time and effort .)
Beautiful work as always! What are the lights that you showed at the end, I can’t find them. They look just like the real Baja designs lights, I love how they look!
Thanks for the kind words! They’re from Yrucec RC. He does amazing work indeed!
Thank you so much, I’m going to order a few pairs asap!
Element Utron would look good with a real bed on it
So impressive you are
wow! Really nice! those lights tho. what r they?
Mooi gedaan!🤗
The tan leather seats needs a couple of fart stains. You know, for that realism 😂
Would love to purchase 2 if your are making them for sale.
Danke aus Deutschland für dieses Video,vileicht kannst du die Datei für den Holtz Aufbau auf der Ladefläche hir verlinken danke
Hei Hans, hit me up on instagram, I can sell you one. 👍🏼
I really need your help with matching the body color of the CJ7 Jeep? Can you please help?
That company has straight up stolen the Vanquish compstance logo.
"I'm a tiny bit of a douche like that"....😅😅😅😅......legend
Awesome 🤘🍻🤘
I’ll be watching for the next one until then peace and chicken grease 😁😁👋👋😎
🤯🤯Awesome🤯🤯
1st 🎉😂
🎉😄🙌🏼
@@hemistormrc that's some nice wood in the trunk. Is the laser the combined 3in1 machine?
would be awesome to have such a wood insert for one of the "old style" bodied Elements (Trailwalker, SenderoHD, Ecto or Zuul).
P r o m o S M