Это видео недоступно.
Сожалеем об этом.
Challenge Targets DIY Auto-Reset Popper Plates - Part 1 - Building the Stand
HTML-код
- Опубликовано: 17 мар 2015
- www.challengeta... Barret and I had much fun building this target stand. Our standard was to use as few tools and bought materials as possible. Most of the stand is made from scrap lumber. Even the 4" x 8" was a junk piece of timber I got from my heavy timber supplier. He said he had some he could not sell and gave it to me for $20 :)
Thanks to Challenge Targets for asking us to make the video! They are a great bunch of guys.
Part 2 will include the range trip and finalizing the reset function. I will also include links for the SketchUp file download.
Places you can find me!
facebook: / artisantony.youtube
Website: www.ArtisanTony...
Website: ww.RepealGunLaw...
twitter: / artisantony
Music: The music "The Artisan Way" was written and performed for my channel by my son, Barret. His channel is here / insanedrummer89
Looks like you guys had fun building it. Great EZ project for hours of fun.👍🤠
It is awesome. I donated it to the our rifle club so more people could enjoy it :) Thanks!
Exactly what I needed to finish my shooting gallery! Thanks guys
Thanks!
Attach a threaded rod to the resetting bar which hangs out horizontal behind the wood when its pulled up to reset the targets, that way you can put on some opposing counterweights which will pull the wood back down after a reset of the targets !!
great looking target !! looks like you guys will have a great time on that .
Jus what I needed to see to build my pellet gun targets. Using electrical back plates cut up into your design
Yes, this was a fun project and it is still at our rifle club where I donated :)
Good target stand, Artisan Tony. Both you and Barret did a good job. The most impressive part of the video was 'what was NOT shown.' Big Tony and Barret loading the 4" x 8" timber, with the targets on it, into the back of the big Ford truck. That's one heavy piece of the target stand.
Next video, it would be interesting to see Barret ride the horse around the shop. The one with the wheel for the front legs. It looks like it would be a real hoot!!!
***** What is this a comedy channel? haha
ArtisanTony >Could have been!!! = Big Tony lifting the 4" X 8" timber and Barret, both at the same time. Barret would have his feet way off the ground, while still holding onto the timber. Plus, Barret could have sat on the horse earlier in the video and sang, "Yippy ti yi yo, get along little doggies. It's your misfortune and none of my own. Yippy ti yi yo, get along little doggies. You know that Wyoming will be your new home. "
Excellent work gentleman
***** Thank you much :)
mount an upright board on the side with a pulley thats raised about 8" above the targets so when you pull on the string it has more leverage so you can easily reset the target
Pretty impressive. great work. thanks for sharing.
CentralMN 40 Thanks!
Looked like a fun project
It was, thanks!
That was great work. Should have included the addition of the spring but still great work.
Nice project. Nice father & son relationship u 2 have.
Awesome job gentleman
Thanks a bunch!
good job guys , my suggestion is instead of the rope for the reset why not installing a spring behind the metal targets so they flip back when hit ? just a suggestion
You can set the targets to do that, I just like seeing them go down :) We would have little competitions to see how fast we could knock them down Thanks!
Excellent project!
Gary Jordan Thanks Gary!
Looks good guys
mrbakerskatz Thanks! :)
very nice! looking forward to the 2nd vid
buckeyeimaging Dang rain! :) Thanks!
ArtisanTony should be decent tomorrow. and hello from another hamilton county resident.
Can u use those hinges for the plate for Airsoft like do u need to get something else or this one but just not as heavy?????
The 9mm barely knocks them over :)
Very nice target setup but what did that end up costing once it was all said & done. You saved on the material but those plates are sold in packs of 3 at like $189
R Ochoa I had most of the material and challenge targets supplied the steel targets. You are right. It would have been a little pricey.
is that jerry miculuk to the left on the sketchup print?
Thanks tony and ed sheeran
haha, Barret gets that a lot and Barret is also a good musician :)
How about a little wood glue
I try not to depend on glue for anything. I try to make the mechanical connections work which server better through time.
very very good
Thanks! :)
Tony, where did you get the steel poppers for this project please? Thank you
Challenge Targets :)
@@ArtisanTony thank you.
Is that a power C? Go Mocs!
Cool setup, but wouldn’t it have been a lot easier to let the steel plates dangle from that horizontal beam?
No reset necessary.
The whole point of these targets is to hit them properly so they fall over. You can cheap plates if you want dangling targets.
Great job!!... how heavy is it?
FOGHORNNC I think the main beam with the steel is around 90 pounds and the two braces are not bad at all. Two people can easily carry it. Barret and I had no trouble loading it in the truck. The thing is, if it were any lighter you would pull it over when trying to reset the steel plates. It needs to be heavy to function properly. Thanks!
+ArtisanTony Very nice design and video. As for weight, you'd think you could simply pound in some stakes to hold it! Thats what I did on a swing set. If you haul it around, stakes would be much lighter to carry.
fantastic...
Scott AKA mach1mustang1971 Thanks very much!
Where did you get the targets?
Challenge Targets :)
Nice work guys, but I miss the "auto" in your "auto reset" system. Looks like you reset it by hand.
Michael Menke-Mischke - yeah the title is misleading. This is NOT an auto reset system.
Can u do a video testing it out
harry tombs We are going to the range tomorrow to test it! :)
no soul in the intro music :P ;) im jk great video keep it up
pretty cool..
eltenda fabrizio Thank you much! :)
ArtisanTony Love it brother. I wish I had the cash for that drill and drivers, Seeing you guys shooting going to be fun. God Bless,
yankey4 I think I found them on sale :) Thanks!
Take aim.
ruclips.net/video/K_enss5576w/видео.html part 2
If you use a rope to reset it that means it is NOT auto reset.
the fatness on those arms... i can see the heart attack happening
Biscuits and gravy. Heart attack on a plate.